Building a Boat with Plastic Barrels and Wood in the House | by  

I think your boat needs an inner shell as a floor cover. In fact, the body should be two layers.

HDPE can be weded with hot air gun and is guaranteed 100%waterproof. With the nails sooner or later water enters

아주 멋진 배 입니다. 저라면 플라스틱과 목재 사이에 고무 타이어 조각을 넣어 밀봉을 할것 같습니다....

Very good job I likeit

👍 excelente y éxitos

Ładny projekt łodzi! Ta, wykonana przez ciebie jest fajna ale wykonana wg. mnie dopiero w połowie. Brakuje przede wszystkim podłogi oraz zabudowy burt od środka. Bez zabudowy podłogi, stanięcie nogą na dnie łodzi grozi po prostu jej rozerwaniem i zatonięciem! Pozdrawiam

Love it . Looks easy enought. Built a few boats out of plywood, this looks great.

Hadir nyimak salam kenal dari kisaran city Asahan Sumut Indonesia 🇮🇩🇮🇩

Now reinforce the outside of the hull with fiberglass for rigidity and sealing all the leaks that will come up when the mechanical resistance of the water roughens up and thins the plastic. The workmanship was good... But there is a best practice to making anything that floats on the water that significantly reduces the potential for accidents and/or failures in the material/construction.

Nicely done! The difficulty is all the woodwork to get a solid wooden frame.

Thanks for sharing sir Godbless

Amazing tanks perkonsian nya cukup sempal best k

I really don't think that butt jointing the wooden frames and nailing some plastic patches on will last very long.

최고 멋진 보트제작영상 잘보고 구독하고 응원하고갑니다 최고십니다

While good work the best use of these barrels is in pontoon boats.

So creative. Fantastic.

wow very nice lake

ধন্যবাদ ওস্তাদজীকে আমি ১৯৯৪/৯৫ সাধু যোসেপ কারিগরী শিক্ষা গ্রহণ করেছি লেদ মেশিনে প্রশিক্ষণ নিয়েছি এখও এ কাজে নিয়োযিত আছি আপনার কাজে প্রসংশা করি খুবই চমৎকার হাতের কাজ আপনার।

Economiquement intéressant ,mais le problème c'est que rien ne colle sur le polyéthylène , donc pas facile de faire l'étanchéité !

More work than necessary. I would have made a couple of pontoons, built a frame and structure on top. Mounted a motor and been on my way.

That's a pretty awesome build. I don't know how we expected that not to leak. I think I put a roll of butyl and some stainless screws in. Let's go fishin!!

Greetings coming from Indonesia, healthy greetings and creative greetings

Genio

Keep up the good work ...love making...

Goose wasn't bothered by the guy sawing right next to it.

Deffo fit for purpose 😊 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿😁✌️

Araújo caiaque do Brasil

Genial!!.😅

wow... good job.

Cool 👍

1:00 I'm glad i'm not the only goose watching this!

Very nice!

Nice boat

Hay lắm xin cám ơn bạn

Verry nice

Дешевле купить ПНД , чем бочку бу .

My neighbor who was a brainiac made a catamaran using oil drums halves back when they didn't have plastic drums. He put them 4ea long ways and brazed them together Then added copper tubing over it. He reinforced the hull by also bridging it with copper tubing. When he was done he sprayed the bottom a lot of coats as he did with the inside. He put an aluminum wave shield in the front. He put a 20hp motor on the starboard side as he operated it on the port side. The first trial checked out but it was completely under powered. So he kept increasing the Hp until the boat balance out. Eventually heard it sank due to an retaliation for stealing someone's girlfriend.

Cool 😊

Excellent effort , viewing from Detroit Michigan USA 🇺🇸

В следующий раз сделайте и говна и палок!

Super

ich Liebe auch diese PE Tonnen daraus kann man viel Machen unkaputtbar

Excellent travail simple et moins cher je note 20/20 , j'aimerais bien si quelqu'un peut transmettre ça à nos frères en Afrique .Le bois augmente de prix.

On peut faire un bateau avec a peu prés tous type de matériaux, il faut tenir compte de la résistance, du poids et de la facilité a mettre en œuvre. le gars fait avec ce qu'il a sous la main, des barils en plastiques, mais disons-le clairement ce n'est surement pas la meilleure solution, la fibre de verre, le bois ou l'alu seront évidement bien préférable plus durable et fiable! bravo tout de même pour le travail et la patience! Je vois tout de même un inconvénient majeur sur cette réalisation, indépendamment de l’étanchéité qui pourrait être moins bonne a longue échéance, il n'y a aucun fond de sol rigide et si on pose les pieds sur les ptastiques en dehors des longerons de bois, il y a fort a parier qu'on pourrait passer a travers ou affaiblir l'assemblage.

He is a true craftsman. Incredible!

На коленке, из говна и палок, Человек делает настоящую лодку лодку!

The thing with all amateur boatbuilding, including I have a lot of money in my pocket type building, is that you are always controlled to a great extent by what your local materials are. In my case, my designer was on the far side of the NA, near where epoxy was being made, Boeing surplus, and the incredible wood factory that the Pacific North West was. It was really hard to follow his plans. On the other hand, here in Ontario, people's blue docks are always coming apart. Those barrels are somewhat available. Still wouldn't probably make sense for me, but if you are in a part of the world with a lot of foreign aid and plastic polution, who knows...

Need some fiberglass now

Amazing very nice boat making

Yeah yeah, but shop duck! SHOP DUCK!

The video was incredibly informative and inspiring. Watching the entire process of building a boat from plastic barrels and wood was fascinating. Thank you for sharing such a creative and eco-friendly project. Highly recommended for anyone interested in DIY projects!

слишком легкая, такие манёвры могут привести к перевороту, надо делать тяжелее.

Intelligent

No deck inside? I'd probably step right through the hull... With all those tacks, this would be for calm, fresh water lakes only!

Wouldn't take it offshore or out of sight of land. Always wear a life vest.

It is better to weld the seams using a soldering iron and pieces of plastic. Polyethylene terephthalate should be welded. Or you can seal them with silicone sealant. Well, or spend 5-10 bucks on one or two layers of fiberglass, and also make a deck from the same plastic to make it easier to remove water, and add weight to the bottom to make it harder to turn over while standing on the water..

Como proceder para ver experiment nav egabilidade de um desses barcos?

...and it creates microplastics with the saw blade cutting through the plastic.

最多玩幾日,隻船肯定自己解體!成隻船嘅結構只不過比模型船好少少!但模型船吾會坐人!😲😲😲希望佢自己用好啦,吾好害人😐😐😐😐😐😐!

Benar berarti bagus😂🎉

İskelet sağlam olmazsa bogulursun reis...

What about the Kill Cord?

ไม่ทนทานเป็นมลพิษต่อสิ่งแวดล้ม

Jika rumahku dekat pantai pasti kubuat

Did not see any waterproofing did not see any silicon it would leak water.

This is pretty cool, not sure how safe these boats are compared to boats created in traditional materials such as various fibber or just wooden boats. I can imagine these are ok on rivers, but how does that plastic handle sea water? Also I think an improvement would be to use a heated wire cutter to cut plastic or a similar tool. And recycle the scraps too. Using a saw creates a lot of plastic dust, which is both bad for environment and everyone else, while also being very bad for the worker(s). Of course, just reusing the barrel for their original purpose would be an even better use.

Recycling isn't using working barrels :D

Прочно ли это?

Ich sehe nur Mikroplastik

접합부들 틈 사이로 물이 안 세게 하는 방법은 안 나오네. 가장 중요한 과정인데 ㅎ

Norm for river

Everyone has not been on a boat at some point in their life. you are extremely privileged.

how does this not leak?

help the environment by recycling (uses only new barrels) lol

Кажется в стыках не совсем герметично , или " все лодки текут - знай себе вычёрпывай " . Не мне плавать на ней .

whats wrong with screws instead of nails?

not a ship it's a boat

That barrel he had in the front was full of water, the boat is too light for that motor and was trimming up way too high.

Cheaper to just buy a boat . Here in Tampa used plastic barrels are $100 each

So how did he really seal that PP?

Что то грызут меня сомненья что все эти соединения при помощи гвоздей будут достаточно хорошо держать , особенно в полу лодки когда люди начнут туда наступать изнутри давя на пластик рядом с деревом

Я тебя слепила из того что было🤣

Y quebnonfiltre aguaby se unda esta rarobeso

working w ducks

De eenvoudige Indonesiers was al lang begonnen Out koek.😅En 😅

Мужик молодец, рукастый. Однако инженерная составляющая слабовата- у лодки нет единого жёсткого каркаса, а потому вся конструкция получилась хлипкой, и для нормального использования не пригодной

eso no tiene la categoría de barco. Es un objeto flotante.

A Ship!! Lmfao 😂 It's a canoe! 8hp way over kill for that with a flimsy transom! Crazy and dangerous!

I saw this video from its original owner :-(

ボートの強度の基本となる龍骨から造るのでは無く…被覆する船体の形状に合わせて内殻を端材で釘打ちして防水塗料を薄く手塗りする…手の込んだ船外機付き手桶…命がいくつあっても足らんわ!!!まぁ池で水遊びするくらいなら趣味としてアリカモね!! 外洋に出たらお陀仏物件 by 沈水艦

техника безопасности почти нет . обтекаемость очень слабая.слишком лёгкая на развороте перевернётся.

why nails?

So did you just steal this guy's video and narrate over it?

E tutto bello ma secondo me in italia non puoi metterla in acqua la legge quà fa schifo tutto vietato senza la normativa cee

I am wonder, where can I get these plastic barrels ?

Did the thumbnail make anyone else think this guy was going to hit a plank of wood on a water slide? Haha

Ignorant me from 10-15 years ago would have loved this video more. If you're not collecting the micro plastics as you cut the barrels you're just creating micro waste that will end up in our water. I agree with recycling and the reuse of materials but I also believe in making sure that your take care of each step from start to finish. I'd rather him use only wood as it's reusable and not as harmful to the environment instead of plastic but what can you do? If you Google the state you're in asking how much micro plastics are in our drinking water you'll understand why I don't agree with the use of plastics. In my state, 69 tests were done all over the state and there was an average of 13 micro plastics in each test. That's a test tube, a very tiny vial, if you think about a bottle of water and how much you're drinking from those, it's just gonna get worse with more and more people having untreatable cancer. I love the boat build, the guy is creative and did a tremendous job on it, but I have different views on it as I've grown older and more wise. Love the build, good job.

This is horrible. If the barrels had any sort of toxic material, that is now in the water. He is creating lots of tiny plastic pieces that are just spread out onto the ground. He heats the plastic, which releases toxic fumes into the air. There are no "glues" that will seal the plastic, so it will leak. This man should be stopped.

1:32 "Here the design is completely optional", I can translate- "NO design" ))).

Your first statement is a lie, not everyone has been on a boat!