Building A House #1: Lumber Drop, Snapping & Plating

Подписаться 357 тыс.

Просмотров 28 тыс.

0% 0

An 1,800SF single family home with a 6/12 pitch roof, using prefabricated trusses and 2x6" wall construction. In this series I'll walk you through every step of the way during the framing phase. Sharing information on how to properly construct walls, roofs, details and more.
Any questions related to building, leave in the comments.
Join Houzz Pro today: tr.ee/feJ1G0_L1V
--
ALL Tools from Site: www.amazon.com/shop/mattbangs...
My Camera Gear: www.amazon.com/shop/mattbangs...
Connect with Matt:
IG: / mattbangswood
FB: / mattbangswood
E-Mail: MattBangsWoodManagement@gmail.com
Merch: www.MattBangsWood.com/
For ANY and ALL media inquiries, contact Maddi@MattBangsWood.com
#construction #framing #carpentry

Хобби

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 140

@christian0509 4 дня назад

Id wanna do this so bad in the future, such a lovely job. Do you have any advice or tips for someone in high school wanting to learn about this job? Thank you for posting stuff like this, even though I have no idea about anything relevant it's so interesting & cool to me. What are your personal pros and cons about the job?

@mcintosh.daughter 4 дня назад

Christian, I started in the trades then became an ER nurse. I've been back in the trades since 2013. Like the medical field, there are many different and greatly rewarding professions in the trades. Expand your knowledge through books, magazines, journals, videos, social. Ignore the Get Rich Quick, Living Large content (though possible), and consume quality information like what Matt produces. Working in the trades has its stresses and challenges, but is outrageously rewarding.

@christian0509 4 дня назад

@@mcintosh.daughter Thanks for your reply, it's very helpful. I will definitely continue watching Matt's content, it's so very interesting. Do you have any recommendations of books to check out, and what do you think are some of the most important things to learn for someone who's wanting to learn the trade?

@MattBangsWood 4 дня назад

I posted this on IG - when everyone’s done commenting, I’ll respond. 🙏

@christian0509 4 дня назад

@@MattBangsWood I truly appreciate it man 🙏 thank you

@fergusonbrotherscontractin4185 4 дня назад

@@christian0509A bible of sorts, one of the very best framing books and content come from Larry Haun and a wonderful book called: “The Very Efficient Carpenter”. There is a great old school video series on RU-vid you can find of his, that would compliment Matt’s outstanding content.

@dogtownoon9791 4 дня назад

once you mentioned larry haun i knew the house build would be solid !

@MattBangsWood 3 дня назад

Larry’s my hero.

@jeremccurdy 8 дней назад

Loved the Larry Haun reference. Glad to see his influence still alive.

@MattBangsWood 8 дней назад

Truly someone I look up to. He framed with purpose, every move counted.

@johnyeary6695 8 дней назад

Damn I'm on my day off 😂 why did I click on this so fast?

@MattBangsWood 8 дней назад

Haha, I’m glad you’re here.

@shanesouza4303 8 дней назад

@Matt, cutting those metal lumber bands with my rigging axe, so satisfying. The smell of fresh lumber while the lead is yelling out corner and T's counts. Gimme that header list boss. Lesssss Go. 😎✌️

@tjhanlonjr День назад

I seriously learn tricks from you that I never would think of that you.

@luxbuildinggroup 8 дней назад

This video hits different! Love a fresh build!

@RobertJLessard 8 дней назад

Framing is the fun part of hoaue building.

@MattBangsWood 8 дней назад

I agree!

@joshuaswanson4789 8 дней назад

Gotta love a nice flat foundo. I’m doing a remodel right now…from front door to rear door (about 25’)…it’s out an 1-1/4”….yup. We are doing horizontal channel siding too. Things are gonna get interesting. Hard to line courses up wall to wall as it drops an 1-1/4”. lol.

@MattBangsWood 8 дней назад

1-1/4”?! Horizontal siding is going to be interesting.. What’s your plan? Just take it out of the first run and get it level off the bat?

@vladv.8819 4 дня назад

Love your video!!! I'm ready to watch you build!

@DaoMyBuilding 7 дней назад

Your videos are very good, I really like them, please make more videos, I will always support you.

@mikemeachamff1631 7 дней назад

So nice to see a new build from you fellas again!

@MattBangsWood 7 дней назад

Agreed! Thanks for watching man.

@BWIL2515 7 дней назад

Looking forward to the build series thanks

@Marine-wj4jv 8 дней назад

I worked with a framer who used hairspray on his chalk lines to protect them during the frame job.

@MattBangsWood 8 дней назад

It works well from what I hear! Just smell of an ‘80’s cover band all day.. 🤣

@lorenrickey5481 8 дней назад

@@MattBangsWood B52’s Big hair.

@richhansen8617 8 дней назад

Love the new builds!

@MattBangsWood 8 дней назад

Me too! Been a minute.

@shaneoakley8757 8 дней назад

Yay new Panella build!! Our supplier stages our lumber like that on delivery. It’s so nice.

@MattBangsWood 7 дней назад

Yessirrr!

@jasonmadruga9028 8 дней назад

looks like 2 x 6 framing. def the way to go!

@MattBangsWood 8 дней назад

Even interiors too, not normal, typically only higher end goes that route but with how small this is.. It was a no brainer I’d imagine!

@semperfi5861 7 дней назад

Lol, nice to see your pops again and listen to the back n' forth banter 😂

@MattBangsWood 7 дней назад

We go back and forth a lot. Sometimes too far.. 🤣

@johnbambridge1882 7 дней назад

I’m just a humble carpenter from Manitoba. Little 2 man show, but I’d love to learn from you guys haha.

@chrisvids1820 4 дня назад

Very cool to see the real work done. I'm doing takeoffs and truss quotes on CAD. We talk alot about the theory and layout. To actually see it done is awesome.

@TheNotedHero 7 дней назад

new build!? let's goooo!

@John-bx6if 7 дней назад

Great job! Love the references to Larry Haun.

@MattBangsWood 7 дней назад

That man has left a mark on the industry for years to come.

@gregorderas5296 7 дней назад

nice saw flip at <a href="#" class="seekto" data-time="720">12:00</a> hahaha thanks for the great video again🙏👍🙏👍🙏👍

@gregorderas5296 7 дней назад

and the Larry Haun throwback ayeeee

@MattBangsWood 7 дней назад

Haha, the saw flip works 50% of the time, every time.

@Factory928AC 5 дней назад

Banginnnn🤟🏽

@chrissitu663 День назад

Can you show a video of how you read the plans to snap lines and why you snap certain lines first? 2nd year in framing. use to be a cut guy, now installing. I want to learn how to do layouts, snap lines etc next. Thanks Matt!

@cidiotmoments 7 дней назад

You guys definitely have different rules versus where I am working in terms of house building codes, but the essence of carpentry and knowhow is the same. Fast forwarding through some of it helped, lol.

@MattBangsWood 7 дней назад

What’s different / where ya from? I’m always open to new methods, I’m curious to learn what varies from us to you.

@cidiotmoments 7 дней назад

@MattBangsWood The 2x6 untreated on the side of your foundation wouldn't be there. There would be a 2x4 on top of the foundation placed upwards before the pour as your headers. We also put insulation right up to the foundation wall, but before there is a seal done with a thick blue paint to avoid any open gaps

@ALRob288 8 дней назад

Hell ya brother new job new day!!

@Cronic1o1 8 дней назад

<a href="#" class="seekto" data-time="894">14:54</a>, we use those for the quickdeck scaffold platform, as a deck support!

@johnnichols2710 День назад

Matt, have you ever done commercial framing? I think you would like it.

@cristianruiz3396 День назад

You should make a hammer comparison video next bro

@user-gn1ic9ww8q 2 дня назад

gotta do my sun nascar 2 picks for the top 5 today

@jamesgoff2454 4 дня назад

Great videos, Have you ever used Redline chalk? Strong stuff so need to to clear the lines.

@MattBangsWood 4 дня назад

Never heard of it. I'll check it out.

@jamesgoff2454 4 дня назад

@@MattBangsWood If you have Whitecap supply down where you are at. Just careful over over spray especially garage slab. There is like dye mixed in. Great full build vids!

@HydnellumSol 3 дня назад

Wanting to get into construction but have barely any knowledge besides an online course I did from work. Loving these videos. Do you have one based on tools such as why you would use a framing hammer over an nailing gun?

@paulrivera6920 8 дней назад

Ok I know I’m on the east coast and maybe I’m not looking hard enough but do 2x6 come 92 5/8 or do you have to cut each individual stud? And I’m guessing a big price difference if you have to cut each one other than just “slinging” pre cuts? Yup I’m trying to lean.

@MattBangsWood 8 дней назад

92-1/4” pre-cut for 8’ walls. I’ve never found a single person who can explain the reason why they’re different either and it bugs me daily. 92-5/8” is part of the country, 92-1/4” for others.. If we have to precut studs it takes time, definitely wouldn’t cost the same to build a whole home that way.

@shanesouza4303 8 дней назад

@MattBangsWood , comes down to the sheetrockers on the east coast. That's where the 92⅝ came from if I remember correctly. 😎✌️

@kanive1566 7 дней назад

Great video. Is it common practice in framing to cut those boards with a saw over your foot like that?

@MattBangsWood 7 дней назад

For the most part. Wouldn’t be something you’d cut on sawhorses.

@steveramirez1654 4 дня назад

👍👍

@RvRestoration 6 дней назад

Do you always draw the lines on the pad before putting up the frame?

@MattBangsWood 5 дней назад

Absolutely, every time.

@mikekillbryanto День назад

Whats the reason when marking a tape measure with the 2 lines?

@user-gn1ic9ww8q 2 дня назад

tyler reddick ,kyle larson top 5 finishers

@needaman66 7 дней назад

Hi @mattbangswood just wanting understand your chalk lines. Are you not using red oxide? We use red and black oxide and they are permanent, npt need to clear coate. Why does your blow away? Our framing codes are very similar to yours. Cheers

@MattBangsWood 7 дней назад

I’ve never found a dye that I can add that lets them stick longer than a week. What are you using?

@needaman66 7 дней назад

@@MattBangsWood oxide powder

@waltk9067 8 дней назад

👍✌

@matthewtorrey7060 2 дня назад

what lumber yard are you using?

@scottchampion6188 5 дней назад

What news brand snap line do you use?

@MattBangsWood 5 дней назад

I use a Dewalt, just the cheapy from Home Depot. Dad's uses a Tajima.

@bri_guy508 8 дней назад

Gopro on the head or the chest mount? I frame in the north east and wanna start filming more

@MattBangsWood 8 дней назад

Its head mount, shot on Wide-Angle (not super view or hyper view), in 4K (don’t use 5.3K, it’s too much for YT uploads).. If you have any questions just email me: mattbangswood@gmail.com, I’d be happy to help with whatever you need to know.

@bri_guy508 День назад

@@MattBangsWood thanks I appreciate you taking the time to respond. I've been following you for a few years now and I'm glad you are still grinding out RU-vid. Other than the quality and flow of videos getting better you never changed up. Real recognizes real. Keep doing your thing Matt, whether it be passing knowledge on to the next person or breaking down a set of plans, you are helping to keep the trades alive. 🫡🔨📐🪚🪜

@freedomforamericans1174 5 дней назад

All of our 9' pre cuts are 104 5/8. Thats interesting Ive never heard of them being 104 1/4

@MattBangsWood 4 дня назад

West Coast thing.. and I’ve NEVER met anyone who can tell me why!

@joelethalcruz4417 8 дней назад

Is work slowing down in California? Up here in Seattle seems to be slowing down because inflation.

@MattBangsWood 8 дней назад

A few really good lead carpenters have reached out saying they’re about to run out.. It’s definitely a weird year! I’ve got a few frames lined up but by no means is this a record year.

@lorenrickey5481 8 дней назад

Interest rates are slowing down the mortgages which slows down the building.

@xXBuckOFiveXx 8 дней назад

What was your price per sqft on this, labor only I’m assuming?

@MattBangsWood 8 дней назад

Not all that high if I’m being honest, it’s labor only. This one’s a bit lower than we’re used to, but it’s a small project.

@brianbucio1557 7 дней назад

⁠@@MattBangsWoodI’d assume around 22 per sq ft on a banger like this?

@chrisgraeter373 8 дней назад

I noticed no sill seal. Is it not required in CA?

@MattBangsWood 8 дней назад

I put it on before walls stand. Can’t do it just yet! Doesn’t stay down for me if I do it during plating.

@chrisgraeter373 8 дней назад

Ahh I see got ya.

@paulgilliland2992 День назад

I’m a mechanical and electrical quantity surveyor. We measure everything and count everything including fittings , valves , hangers, fixtures. Each item has a unit of labor associated with assembly for example a 3/4” ball valve =.40 hours , up to 2” hanger is 1 hour and a toilet installation is 2 hours . We then have a total materials and man hours to arrive at what we think is a good price . Everything is then tabulated to arrive at our cost then 15 to 30% is added . That’s our bid , hard money how does Matt Bangwood arrive at a price to

@Eddy_HVAC 3 дня назад

Hairspray works too instead of clear pro tip

@drewnolan96 3 дня назад

What do you mean don’t do well with injury? I smashed my finger the other day but was scared to say anything about it. I felt like I was gonna throw up the rest of the day lol.

@northeastframing9021 3 дня назад

I’ve always wondered why do y’all plate the walls first than make the walls. Wouldn’t it be faster to just make the wall as you go

@MattBangsWood 3 дня назад

Just preference, I’d rather layout the whole building before framing.

@northeastframing9021 3 дня назад

@@MattBangsWood cool I watch ur vids all the time

@lctsi 4 дня назад

Do you use tajima?

@MattBangsWood 4 дня назад

I don’t, my pops does.

@TheJoker-ex5rb 6 дней назад

Maybe I missed something were the beach house remodel go?

@MattBangsWood 6 дней назад

Engineering issues - it's firing back up soon!

@TheJoker-ex5rb 6 дней назад

@@MattBangsWoodI gotcha bang on

@samuelmoore657 4 дня назад

genuine question, has your tattoos ever had a negative affect on building rapport with a customer? only asking as I want to get a full sleeve but worried about putting customers off using me for work

@MattBangsWood 4 дня назад

I want to say no, but there's definitely been judgement, dirty looks, etc. Don't do your hands, don't do your neck or face. I have my feet, legs, thighs, stomach, chest, arms, etc.. My back is wide open waiting for the right artist, my neck wont ever get done nor will my face. I feel those cross a line where judgement would be heavy..

@toh2002 8 дней назад

Where did Fox go to?

@MattBangsWood 8 дней назад

He’s been with another builder for a while, still keep in touch from time to time. ☺️ Things get slow, people find work.

@toh2002 8 дней назад

@@MattBangsWood Thanks for the reply

@roberthamilton8388 7 дней назад

Who’s the contractor on the concrete work?

@MattBangsWood 7 дней назад

I never heard of them. They’re local to us I guess. Trying to get contact info for other projects I’ve got.

@rovierFROMosijek 7 дней назад

Is that your dad working with you?

@MattBangsWood 7 дней назад

Yeah.

@tristanmartinez2667 7 дней назад

🫡

@wallacestebbins515 День назад

Need any free labor .. ill come roll with you ..

@its9429 8 дней назад

Looks like nipomo dirt

@MattBangsWood 8 дней назад

Hour north. Miserable heat.

@its9429 7 дней назад

@@MattBangsWood Atascadero?

@davidlutz6875 7 дней назад

@@its9429 That was my guess. I'm glad I'm in Morro Bay.

@jamesgibson8258 6 дней назад

wheres fox

@holzaufholz9001 8 дней назад

wo ist FOX hin 😢

@TYPICALTRYHARD_ 17 часов назад

A happy little accident. There's 10 hidden bodies down there for sure

@eddieleon39 8 дней назад

How do you like the Martinez speed square?

@antoniorivera237 7 дней назад

Hi amigo Hi from Madison Wisconsin 🇵🇷🇵🇷🇵🇷🛠📐🔨🪚..

@MattBangsWood 7 дней назад

Hey Antonio!

@thetruth6792 8 дней назад

Must be nice to show up with NO concern for getting it done...still popping lines at lunch? You are fired. Get off my job. You dont even know the plans? You had them DAYS before the job and are unfamiliar?... Fired. SOOOOOO SLOW. Nice to be making money beyond the framing.. is that why you are so SLOW?.... Have i mentioned.. you are fired?

@MattBangsWood 8 дней назад

There’s life beyond tract homes, my friend. ☺️ I’ve popped lines for a day or two on large homes. Also, break is 2 hours into the day. So it took 2 hours to pop lines.. Can’t fire what you can’t hire. 🫰

@bassman87 7 дней назад

@@MattBangsWood you know you're doing something right when the haters come out of the wood work.

@surebrah 7 дней назад

@@MattBangsWood I'm hoping this is a parody, kinda like the "replumb" channel guy?

@tristanmartinez2667 7 дней назад

aye shut up

@MattBangsWood 7 дней назад

Who knows!

@drewnolan96 3 дня назад

What do you mean don’t do well with injury? I smashed my finger the other day but was scared to say anything about it. I felt like I was gonna throw up the rest of the day lol.

@MattBangsWood 3 дня назад

I don’t do well with getting hurt, I pass out quick. Blood scares me. Regardless of how much I’ve seen, I still react terribly to it. Sounds like you’re the same way. 🤣