Building a Mini Explorer with SpeedyBee F405 Mini 35A Stack 

Looks like a nice clean build. I hope it performs well for you. Thank you for sharing this video. Happy flying amigo.

My first flight 2 days ago the drone fell out of the sky about 3ft above ground on a turn. The 5v BEC on the Mini F405 apparently decided to stop working as verified with Multi Meter. Plug in USB everything works. Plug in a battery and no voltage going to receiver. Running 4S and this was the second flight. I hope they don't all have this issue.

Great Video! I bought a Flyfish Atlas 4“ Frame. I will use the SpeedyBee mini Stack for it. Can’t wait to start building 😁

I've used this stack for slightly over a month. On a 1.1kg drone soccer ball pushing 2207 2350kv F60 III motors and HQ R42 props running on 4s. In a typical drone soccer training/match...its normal to keep crashing it on the goalpost/floor and other drones. I'm still surprised its working

Why didn't you use a capacitor on the power input?

Am I missing the flight videos for this, the cinelog20 and cinebot30?

I just have to say, Diatone has been building reliable stacks at this price point for some time now. It's arguable that they are better tested. Maybe not handing them out to U Toobers so much.

No cap? Guessing space was limited, the cap included was quite big, I had to swap to smaller one of the same capacitance

Cool! What is the weight? How it is comparable to Flywoo LR4?

I am building the same quad and I wonder du you know if the drone can lift a GoPro ?

Fly time on this ?

Good time of day. There is a question. I was tempted to buy a 35A Speedy Bee F405 mini stack for whoop. And here's what's interesting, even when powered only by USB, the STM32 and the bluetooth chip are very heated. I can't keep my finger on them for a long time. But at the same time everything seems to work. For comparison, I have a Mamba F405 stack, and it's cold. Can you tell me if this is the norm for these politicians? In addition, after several firmware updates, one of the four ESC stopped being sewn. The program writes "ESC erased or unknown". Nevertheless, the motor is running. By the way, "out of the box" none of the motors rotated, only twitched at 2000 microseconds. Only after the Jazz Maverick firmware, the motors turned. The motors were also taken by speedy bee 1404, and they are also like boilers! Here is such a rabid bee))

what flux did you use for the build thanks

may i ask where did you buy the frame?

where do you buy the tape for the frame arm wire

esc burned after first flight with bee35 factory drone

Where can I find that special tape?

Can I use fsia6b reciver