BUILDING CUSTOM FENDER WELLS. Tie rods, Fire wall tubs, && Rust repair. ((1977 Datstun 620.)) 

Let me tell you why you are one of the best channels out there. There are a lot of entertaining guys who pull old stuff out, start it up, and leave it in their yard to rot just as it was before they yanked it out. You actually bring your projects back to life. You make them useful again and that has more value than just entertainment. You also do your own fabrication which is so much more special than just swapping parts. Thank you for being you.

I love how Puddin talks about winging it just before being meticulous with measurements and stencils. :-)

Nothing like treating myself with a puddins fab shop right after work .

Man, you're the epitomy of "If you can dream it, you can build it." Thanks for more inspiration!

Just ordered my limited addition teal wall hanger! My family and I really enjoy your energy and personality we often watch you on the big screen in the family room, and can't wait to see the YEHAWL 2.0 finished in all her glory!

One of my favorite "sheet metal tools" was a world-war-two vintage office desk. Thick steel construction, you could close your work piece in the various spaces between the drawers to form bends, and even curves, as you back the metal out of the drawer little by little.

That mix of winging it and actually well thought out design is pure magic right there

Love the keychain idea… and those fender wells look amazing! Pretty rad for a “not a sheetmetal guy” guy.

You always say your not a sheet metal guy, but you do pretty good work. Hell I used to hate doing exhaust manifolds, I was scared of broken bolts and studs, but I got good at it and I’m the manifold king at work now, lol.

Dr. Puddan, I've said this many times, your a great fabricator/ welder. When you have fun we all have fun. On the other side of fear is everything we want. God bless you and your family

We need some “Puddin’s Fab Coffee” you know that would sell!

"When you set low standards, it's easy to please yourself." - That's a keeper

Woot Woot! Glad to see the new video. Also, I noticed how you " feather" your tacks before welding. As a pipe welder for 26 years, feathering those tacks is super important.

Honestly, just kudos to picking up a 620 project and sticking to it. I know this ones got history with you and is probably one of the more popular builds on your channel, but I dont know how many 'barn find rescues' and restorations people have started on a 620 and then gave up for a C10 or something else because it wasn't getting the views. Granted, yours is getting views because you're making insane progress at an insane rate, and its actually quality stuff! And for the people who dont like the mini truck content.. hit up any other car resto/rescue channel because this stuff here is gold.

Your videos are really the only videos that I get excited when I see a new one posted!!

I'm a big fan of triangulated 4 link suspension, especially on rear suspensions, it's the most efficient way to center a rear end with the most travel. It's also good for when you don't have a lot of room for suspension components. Which is also a plus.

This is still the best part of Mondays while I'm stuck at work. 🤙🏾

I have a blue 78 datsun pick up and I used to work for uhaul... this show speaks to me!

The Datsun Delivery truck is definitely coming together and lookin' good! A bigger shop would do nothing but enhance things for you, so I say keep growing!

I think it's awesome how you just "Go for it" and if it don't work, you adapt and make it work. "It's only metal". Great job buddy!

hey that simple bead roll on those inner fender wells made a hell of a difference lookin good

"When ya set low standards, it's easy to please yourself"....Puddin' I'm thinking some new merch with this PuddinWisdom on it!!!

These dimple dyes are growing on me. The end product really looks good. I never knew much about em till Puddin taught me.

the jack wheel sheet metal tool..... brilliant

This video makes me glad I just finished watching this whole build from the start again yesterday 👍

when my day has been crap i seen you put up a so i just want to say thanks for turning my day around

Been waiting for this video. You might not like fabbing stuff like this all the time but I'll be here for all of them.

Great show lots of little tricks for me to use, I've never messed with sheet metal but I will. The new souvenir keychain idea would be great, don't forget to dimple die them. A speed whole would make my truck go faster. Keep up the great work, I learn something every time I watch your videos.

Thanks man! Making Mondays worth it!

44:37 I like watchin' Puddin because he's a such a great sheet metal guy.

Much respect for this man. And of course the Girls y'all should have 6 million subs.

Everybody needs a bigger shop no matter what anybody else thinks. I have two shops and darn it if I couldn't use a bigger one. 🤘😁

I always look forward to videos on Monday. I think what you do in fab applies to anything any car any truck

In 1977 I bought a new Datsun King Cab truck, 4cyl., 5 speed. That was my favorite ride for many years. Too many stories to tell. I hauled rail road ties stacked to the top of the cab, and with 120K miles she would chirp the tires in 3rd. She was a beautiful blue... Dang, I miss that truck.

I ordered Shirts last Monday night, and in my mailbox today was my order! Thank you for the fast service! The sheet metal work looks awesome. This build is really coming along. Keep it up!

That thing is coming together really good. Great job on the fenders. Can’t wait till shes finished.

This is why I now, look forward to Mondays.

The direction this truck is going is awesome love it !!!

You got me wanting Mondays to be here faster! Awesome video puddin!!🤘🤘

Absolutely love this build! Now all it needs is an SR20!

Hello puddin happy to see more of your great videos I look forward every Monday night to see what you are working on next and love your sense of humor man

You really did some fantastic work on that Datsun, it was great watching ya, fabrication and entertainment and one show, can't be that 👍☮️

Been waiting for this all week! Got my three shirts today! Best channel on RU-vid yo. I put a pfs sticker on my work cup, and people are asking what it is, and I tell em, if you don't t know, you ain't hip 🤣 We love you Puddin!

You do pretty awesome work you have to acknowledge that you’re not the average person you’re well above that

Fenders came out great. Really impressed with the things you're doing with the basic tools ya got. Inspires me, whether or not thats a good thing, I guess we'll find out!

I think the bead rolling and dimple dies set it off 100% I love it!

Thank you for another awesome video!

If you made Puddin's Fab shop bandanas I would buy several of them. I'm a motorcycle rider and hats never stay in place. Your builds are great. I love the Toyota build. Keep making the awesome builds and videos.

This is an awesome “back yard build” with minimal tools and good ideas. Lovin it!

I love it when someone beatboxes and the "[Music]" comes up in the CC. Dang. People talk about a copyright strike when they sing, but man you did it!

This is genuinely one of your best and funniest videos you have done. It's fun to watch your growth as an entertainer and as a builder. I'd let you wrench on my 620 any day.

HA! The bell don't dismiss you, I do! Every teacher I had in high school would say that. What a flashback.

I'm glad you have set goals.I will watch as you achieve them.Keep going buddy.

On the brake lines, 80’s ABS was pretty much ridiculous in every vehicle. I too am a fan of cleaning up the firewall and hiding as much as possible. Thanks for the entertainment.

Hot dam hope u having a blessed day

Can we all just take a minute to praise this man? He will set there and make one of the things he doesn't like into a video and that's basically making that job 2 times harder, like he does it with a smile on his face and manages to put a smile on are faces!!! Let's take a minute to just thank puddin for everything he has done♡!! Thank you puddin you are an amazing man with an amazing family and I love the channel keep up the amazing work!!! Have a wonderful day you all!!

just love everything you do your so intertaining and fun to watch

I use to do the same thing with a hundred dollar bill in my "70" Charger R/T with a 440, 4-speed, back in the late 70's. Never lost that money either.

I been watching you for the last few months and I look forward to Mondays. Between you and old Mortske you two really are edutainment. You should start going to some of the events like the Cletus stuff. Sell some merchandise and meet some fans! 👍🏿

On my old 66 C-10 short stepside someone had put a floor shifter in it that was junk . found a good column with a good 3speed shifter and put back the 3on the tree leaving a hole in the floor i had a skinny buddy over helping get everything together had bought new carpet to put in when we git the hole covered , he looked at the half hump and bent the metal over his chicken bone thigh and it was a perfect match for what we needed . Sometimes the tools the Lord gave us work best !!

Man, this looks good Puddin! I think SEMA might be calling. Love watching this rig come together. Cannot wait to see where it ends. Lot of love brother.🇿🇦🇿🇦🇿🇦🇺🇸🇺🇸🇺🇸

For someone who says they are half assing it it's looking really cool. I'm learning so many things watching you work. Thanks 👍

I would definitely be interested in some pieces of the Datsun fender! Thats a great idea....keep it up homie!

You may not be a "sheet metal guy" but I could watch you do it all day.

Looks damn good!! I know you’re “not a sheet metal guy,” but if you keep at it you sure would be. 👏🏼

Sheet metal can also be called art, it's all how you look at it. Keep up the work, it's looking great so far

Good afternoon puddin! Just a thought 🤔. Have you tried putting the inner ball on tie rod. In upside down (through the bottom)? Looked like maybe a better angle 🤷

Always a pleasure. Original and fun. A bigger shop is really becoming a necessity for you.

Guess what I'm watchin instead of fixin my own projects

Them key chains gotta be stamped with a crown 👑 #datsunking

Nothing makes a bad day better than a little Puddin'.

Used to build mini trucks with my buddy Whitney in Ada Oklahoma miss those days R.I.P my friend

I came to this video in hopes of seein' Puddin' on his back with his legs kickin' in the air and Yo', what did I find? The best; thanks Pud! You're the best.

I like the bead roller & dimple die look, it reminds me a little of American engineering design from the 20's, the golden age of American Engineering. And it suits this truck, with the motif being used all over. And I guess you like the dimples too!

It was great getting to meet you over at Raceton's the other day. We're not friends yet, but I promise you one thing, when I say I love watching people grow and succeed, I mean it. You realize how unmotivating and boring it is watching people just shuffle along being content with half ass? When people around me excel, it motivates me to excel and push myself harder. We have a lot of mutual friends, and I've heard nothing but great stuff about you. Since discovering your channel it's quickly become one of my favorites. And when I say I can't wait to see what all kinds of opportunities you open up for yourself, I mean it. I wish everybody had that same passion and ambition in life.

I feel ya, Puddin. I do small engine revivals, and I've never even had a shop. I have to work on the back patio. I have been saving for three years, and I should be making a down payment on my shop within the next month. It will be so nice to actually have some space to work in.

Enjoyed the customized wheel wells, and the simple die used with the hammer

Richardson brand makes the best quality trucker hats hands down. They can be a little pricey but WELL worth it!!!!

I appreciate the longer episode. Its really nice to watch after waiting a whole week. 👍

Everyone like to see the end product but nobody knows what the process really takes. Way to go, great looking front end

If you make it, we'll buy it. For someone who claims not to be a sheetmetal man, you do a great job.

Man the more I watch you the better I realize how good you are at what you do

My project recently got finished after some five or six years of sheet metal work and I don't call myself a sheet metal guy either. I do appreciate working in metal though and it is a heck of a lot easier to weld in thick metal, but thinner metal is much more malleable of course and thus easier in other ways. Keep this project up, I'm liking it a lot more than the will it runs although you have an ability to make everything you film entertaining. 👍

My hands and knuckles were suffering the whole time I watched you working that sheet of razor blades into those fender wells! You did 'PUDDY GOOD". ...😎

Loved this week video. keep up the good work. God bless you and your family.

Every week is super entertaining and gives me ideas a motivation to try new stuff on my project. May have to go back and redo my inner fenders with the tips you showed.

I personally wanna take the time to thank old Bill, and all the guys just like him, for the thumb buff.

I beat my fenders in on my Mazda and broke the ecm! Learned lesson the hard way as always! Thanks for the trip to memory lane!

Keychain is a good idea. Nice fender wells. I just ordered a miller 211. I'd say your channel helped me pull the trigger on the machine. That thing sounds perfect

Fun to watch you puzzle through these geometry problems! Some inspired stuff here.

I like the way you frenched in the clutch master cylinder. It all looks awesome. Very good job.

man i just love the tools you used ,the gas bottle ,the trolley jack ,made my day ,thats straight up custom right there , its becomming the dimple die datsun love the video ,love the build

As an engineering student I have to say, that lesson was perfect. Please come teach at my school🤣

turning out. awesome puddin. love this work. the videos help get my mind off of family problems thanks for all you do

i have to say you do a better job then i ever would, i'm not a metal fab guy, but with you makes me want to try it. pot county dimple dye king here!

Thank you for making sure the captions are working. The are the only option I have for knowing what you are saying.

Looks good. I enjoy custom metal work. It's been a minute since I have done any but I do enjoy it.

It just hit me what the bell sound is in your intro theme - a gas station bell!! LOL!! Excellent.

Video is so good I had to watch it twice in row lol love the work I am going to building custom inner fender wells for my c10 soon and watching you has helped me some to figure out how I want them thank you brother for the great video

Dagum Bob Ross in the garage today!