Building RWD RC Drift Car Shaft Driven Middle Motor & Test Run MST FMX 2.0 LCG

Подписаться 17 тыс.

Просмотров 36 тыс.

50% 1

Unique balance, sound and control stability style of 1/10 RWD RC Drift Chassis.
Test run setting details (another setup base from manual instruction)
MST option parts add on (3 items)
MST FXX steel gear A 30T : code 210447
MST FXX 2.0 aluminum reducer case set red : code 210624R
MST FXX aluminum gear ration adjuster set red : code 210337R
Rear ball diff loose/tide : 30/100
Front camber : 7 / Rear camber : 0 / Caster : 8
Rear active toe turnbuckle length : 8.5 mm.
Front Y-Arm : strength +3 mm. from original manual setup
Turnbuckle connect between steering arm and front upright length : 15 mm.
Front tower shock hole : 3/4 and Y-Arm hole : 2/3 (count from inside car)
Rear tower shock hole : 3/4 and lower arm hole : 7/7 (count from inside car)
Wheels : HPI offset 6 / front + spacer shim 0.5 mm. / rear + spacer shim 1.0 mm. (3Racing)
Motor : Team Powers brushless 10.5T Plutonium V3
ESC : Team Powers brushless XPS sport 140A V3 speed control w/ LED card
Gyro : Futaba GYD550
Radio : Futaba 4PM
Receiver : Futaba R334SBS S.Bus2 T-FHSS SR HV 4-channel
Servo : Power HD coreless motor D12 high voltage 7.4V 12.5kg low profile support SSR mode
Pinion gear : Robinson Racing hard coated aluminum 48P 20T
Wire : MUCH MORE 14AWG super flexible high current silicone wire
Plug : Yeah Racing angle type 4 mm. & 5 mm. connector plug
Body shell : Tamiya Mazda3 and KillerBody Rocket Bunny fenders
Special Thanks
Owner : Paweenawat Rodsin (Frank)
Drone camera driver : PEKOPON PILOT Pekopon Hobbies Studio RU-vid Channel @
/ @pekoponhobbies888
RC Drift Track : BeHobby Shop RC City BKK Thailand
Back up : Nano Drift, Pheeraphon Soonthornwathin and Chanasorn AoF'z
VDO NO. 150
Hobby can make you live a happier life.
RaceInPeace is Here RU-vid Channel Est. March 2019.
Assemble, Body made, Photo & VDO By RaceInPeace
For more info or Sponsor, contact @ RaceInPeace FB Page
Thanks for watching, with love from BKK Thailand
ขอบคุณครับ
#RCDrift #RCCar #MST

Авто/Мото

Опубликовано:

26 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 142

@monsrc3122 2 года назад

This video is so good. You deserve way more views! It must take taken many hours to edit and film. if you have time please help recommend, I'm looking to get my first RWD drift MST but I don't know which one would be better for Asphalt drift, RMX, FMX or FXX ? it seems like RMX would provide best grip and speed and FXX might be too slow or have I got that the other way around. Then I though I probably cant go wrong with FMX :)

@RaceInPeaceisHere 2 года назад

Hello from BKK, where you live? and thanks for watching this VDO too, I am RMX 2.0 S user who go with rear motor conversion kit over 4 years (before RRX 2.0 S released) and this is my opinion >>> if you no need to go by too much of budget, you can run with RMX 2.0 S RTR, you can find OPB VDO and test run in another channel, brushed or brushless, both are good for saving budget too and can upgrade to pro version with any parts of chassis too >>> FXX 2.0 S the driving style is super close with real car because engine bay stay in the front but in RC physics, we don't have much horse power like real car so FXX is harder for setting up chassis to go with high speed like the rear motor position (RMX, RRX, FMX, D5, YD-2(any version), Overdose Galm, GRK R31House, etc BUT I think I love the sliding style of FXX 2.0 S and now I am already got this one but not assemble yet , FMX 2.0 LCG is great choice too because out of the box come with more upgrade parts (main chassis, alu shock) and after I am running this car for shooting VDO, I think FMX is good for speed and totally different in transition action while drifting if we compare with any chassis but this one coming with higher price more than RMX, FXX, RRX too :D

@monsrc3122 2 года назад

@@RaceInPeaceisHere thank you for quick reply. I'm in New Zealand, I always do AWD CS drifting with Tamiya TA-06 / XV-01 and I mostly do it on outdoor high grip asphalt driveway with MST blue dot and PC tires. Can do a lot of high speed drift with it, the XV-01 is a lot like the FXX but with Belt, it was very difficult to setup and get it just right for drift, many hours of testing and failing but satisfying result, great angles. I noticed that RWD are often slower in comparison to CS cars for outdoor drift, so looking for the fastest RWD MST chassis, I think sounds like the RMX is the way to go. My budget is a choice between RMX 2.5 RS or FMX 2.0 LCG, the FMX is cheaper at the moment nearly $100, but the RMX RS adjustable engine position is also really good.

@RaceInPeaceisHere 2 года назад

RMX 2.5 is coming with new gear system and new adjustable option with shock but FMX is old option with that, nice to meet you here and keep fun with your hobby time, stay safe too lml/

@TranceFur Год назад

I’m a 1/8 off-road racing guy, but wow… This MST kit is gorgeous. The fit, finish and design are beautiful. Great job and attention to detail, my friend. You captured the building process perfectly.

@RaceInPeaceisHere Год назад

Hi there, thanks for watching and if you need help about rwd rc drift, just drop here man lml/

@isaacfernandez6210 7 месяцев назад

Thanks for answering. It seems that many you tubers only post videos to receive praise and lines. when in reality. It is to show your good work and rewards. thanks from Spain.

@RaceInPeaceisHere 7 месяцев назад

Thanks for watching my VDO too, with love from BKK Thailand lml/

@VenomHadesOfficial 3 года назад

The production of these videos are amazing keep up the good work!

@RaceInPeaceisHere 3 года назад

Thanks for cheering, stay safe too lml/

@TheNamesArif 2 года назад

I just can't help but drool over these videos 🤤

@RaceInPeaceisHere 2 года назад

Hello, thanks for watching my VDO lml/

@maskpsychoses4761 2 года назад

I would definitely buy a Mazda 3 if I saw one looking like that in real life. Excellent build looks amazing.

@RaceInPeaceisHere 2 года назад

Hello, happy to hear you like this, thanks for watching my VDO too, have a nice day man lml/

@maskpsychoses4761 2 года назад

@@RaceInPeaceisHere your welcome. Keep up the great work.

@maskpsychoses4761 2 года назад

Cheers from Texas.

@vagkingjg 2 года назад

Outstanding production!!!!! Top notch!!! This was so beautiful to watch but i can´t believe you drilled that lovely body. o.o

@RaceInPeaceisHere 2 года назад

Hello, thanks for watching, The owner need to see the feeling of RC car so I am using body mount not magnet ;) you can see drill scene at Tamiya Mazda3 Rocket Bunny VDO too haha

@vagkingjg 2 года назад

@@RaceInPeaceisHere I just did :D That was tough ;) Man, you've got an awesome channel. I didn't know there was something like rc-porn. Keep it up!

@RaceInPeaceisHere 2 года назад

Happy to hear you love my content style, I will go on lml/

@MikeLouie_TKD 2 года назад

Always a beautiful video!

@RaceInPeaceisHere 2 года назад

Thanks for watching this previous VDO too ;)

@toom23.t 3 года назад

เสียงรถอย่างเร้าาา ติดหูจนหลอน น้อนนแดงงงง🤘🏻❤️

@RaceInPeaceisHere 3 года назад

อยากได้เลยกุ 555

@pongsuradejfuangkeaw2596 Год назад

ชอบวิดิโอจังเลยครับ นึกว่าของต่างประเทศ ได้ยินเสียงอุทาน เอ้า !...อ้อคนไทย 555 กำลังศึกษาอยู่เลยไว้ไปอุดหนุนครับ

@RaceInPeaceisHere Год назад

สวัสดีครับ ขอบคุณที่เข้ามาดูคลิปด้วยนะคับผม

@UAERCADDICTS 3 года назад

nice build

@RaceInPeaceisHere 3 года назад

thanks for watching _/\_

@user-wh3lf5wy4j 6 месяцев назад

Obviously an old video. BUT.... 2 things missed here. 1. the o-rings you placed on the outside of the shock body must be installed inside the spring collar NOT floating on the outside of the shock, to prevent pre-load adjustments from wandering. 2. when building the shocks like you did using the rebound setting you must have the lower spring retainer on too. All that bearing oil put on everything is a magnet for accumulating dirt and dust will hinder movement.

@RaceInPeaceisHere 6 месяцев назад

Thank you

@zeroswings2 3 года назад

been waiting a while for this!

@RaceInPeaceisHere 3 года назад

super thanks lml/

@MRPB54 2 года назад

I own a MST RRX 2.0 and I love how easy is to setup drifts and move it along the track now looking to add another chassis and been thinking of a Yokomo YD2 Eplus since a lot of people like the S vs E I want to be different :P

@RaceInPeaceisHere 2 года назад

YD-2Z will be my choice :D

@MRPB54 2 года назад

@@RaceInPeaceisHere yeah I really like the new one just dont know if stock shocks are good enough 🤔

@Valdabois 2 года назад

Soo underrated 😱

@RaceInPeaceisHere 2 года назад

Thanks for watching this lml/

@Valdabois 2 года назад

@@RaceInPeaceisHere I'm thinking of getting one

@RaceInPeaceisHere 2 года назад

Good for research but may be not good for competition man, try one if you love to spend you time with this hobby, you will find the another characteristic of this chassis, different from YD-2 or D5 or another motor position in the back

@Valdabois 2 года назад

I'll probably get the a YD

@isaacfernandez6210 7 месяцев назад

A sober and elegant finish, bordering on perfection. The detail of the screws to hold the wheel arch extensions is magnificent. Where can I get those small screws???? Thanks from Spain.

@RaceInPeaceisHere 7 месяцев назад

Hi, screw is here www.rcmart.com/product-search?search=Micro%20screw

@RaceInPeaceisHere 7 месяцев назад

and this is the alternate VDO of her :D ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fh-1-GiK_6o.htmlsi=1JgfCmxG35OU4Uof

@djkusuma2363 2 года назад

keren banget

@RaceInPeaceisHere 2 года назад

Thank you :D

@pheeraphonwangsriyawan3423 3 года назад

เยี่ยมกู๊ด ถ่ายสวย ดูเพลิน เห้อ มะไหร่จะได้ไปสนาม

@RaceInPeaceisHere 3 года назад

ขอบคุณคับพี่ เราไปกันพรุ่งนี้เลยมะ แต่วันนี้ผมไปหาซื้อเตียงมารอก่อน

@pheeraphonwangsriyawan3423 3 года назад

@@RaceInPeaceisHere พี่ไม่มีวิคตองงง มีฟ้าทาลายโจรรรร ก็พี่มันไม่มีเตียง จะให้ไปดริฟกูคงโดนยุดดดดจับบบ

@RaceInPeaceisHere 3 года назад

ยุดไม่กัว กุกัวโควิท ดอก !!!

@circle23th55 3 года назад

สวยงามตามท้องเรื่อง เยี่ยมยอดเช่นเคย มาตรฐานไม่มีตก Lamborghini เตรียมเลยครับ🤣🤣🤣

@RaceInPeaceisHere 3 года назад

แลมโบคงไม่ได้ทำอะคับ ผมซื้อกล่องนี้มาเอารถข้างในแล้วมีพี่เจ้าของเอาบอดี้ไปแทน 555 ขอบคุณที่เข้ามาดูคลิปนะคับผม

@RaceInPeaceisHere 3 года назад

นี่พี่นนท์ป่ะคับ ชิบหายแล้วกุ 5555

@frankynobita1741 3 года назад

@@RaceInPeaceisHere 🤣🤣🤣🤣

@circle23th55 3 года назад

🤣🤣🤣👍

@frankynobita1741 3 года назад

กราบขอบพระคุณครับ 🙏🏻🙏🏻🙏🏻

@RaceInPeaceisHere 3 года назад

กราบนายท่านนายทุนด้วยครับผม

@frankynobita1741 3 года назад

@@RaceInPeaceisHere เลิฟๆครับ เดี๊ยวหารถให้ปวดหัวใหม่ครับ 😄

@RaceInPeaceisHere 3 года назад

@@frankynobita1741 รับหลวงพ่อโยไปห้อยดอว์ เอ้ย !!! ห้อยคอเพิ่มด้วยมั้ยครับ

@LouieMiLLz 2 года назад

🔥🔥🔥🔥🔥🔥🔥

@RaceInPeaceisHere 2 года назад

Thank you lml/

@sneeking2487 2 года назад

I love the new Mazda 3

@RaceInPeaceisHere 2 года назад

RX-7 too!?

@sneeking2487 2 года назад

Yes it's in going to be buying a real one here soon

@RaceInPeaceisHere 2 года назад

Great JDM choice

@yogifpv839 3 года назад

Finally!!!

@RaceInPeaceisHere 3 года назад

And the next VDO is mazda3 too >

@juergesteininger1 3 года назад

Thanks for this video, i'm a huge Mazda 3 fan and made one myself a few months ago. I must say this colour looks amazing, can you tell me which one you've used?

@RaceInPeaceisHere 3 года назад

hi there, thanks for watching this VDO too, the first layer is Tamiya PS 37 Translucent Red (depend on you need, more layer more dark, less layer more bright) second layer is sparkle metallic spray, I am buying this one in my local store (LeyLand Branding) third layer is silver spray, LayLand too and the last layer is Black matte Nippon paint Branding, I make this way because I don't have any air-brush system so I try to adapt other ways for painting :D

@ascreativeandrccars4489 3 года назад

Yes

@RaceInPeaceisHere 3 года назад

pls stay for test running before the end :D

@ascreativeandrccars4489 3 года назад

@johanabkho8382 3 года назад

👍👍👍🤗🤗🤗

@RaceInPeaceisHere 3 года назад

:D lml/

@alejandrocueva3372 2 года назад

Great video, very good on details. Love the color. I’d like to use that on my A90 Supra rocket bunny wide body. What colors did you use?

@RaceInPeaceisHere 2 года назад

BIG thanks for watching, the first layer is Tamiya PS 37 Translucent Red (depend on you need, more layer more dark, less layer more bright) second layer is sparkle metallic spray, I am buying this one in my local store (LeyLand Branding) third layer is silver spray, LayLand too and the last layer is Black matte Nippon paint Branding, I make this way because I don't have any air-brush system so I try to adapt other ways for painting

@alejandrocueva3372 2 года назад

@@RaceInPeaceisHere thank you. The body looks really good whichever wet you painted it.

@RaceInPeaceisHere 2 года назад

Thank you :)))

@alexf7173 3 года назад

So nice :-) perfect body work :-) wich wide bodykit did you use ? Killer body? For wich body?

@RaceInPeaceisHere 3 года назад

This fender parts is for killerbody FT86/BRZ

@alexf7173 3 года назад

Thank you for the Information

@RaceInPeaceisHere 3 года назад

@@alexf7173 the next VDO will show the way to assemble parts on body shell, pls stay tuned ;)

@imaql8 2 года назад

what is the fluid you put on the threads of the front lower arm is it like a lube to keep the plastic and metal free when screwing and unscrewing?

@RaceInPeaceisHere 2 года назад

That is ball bearing oil

@hadynmcloughlin4661 2 года назад

Great video I am building my first MST kit getting into the hobby. What oil did you use to thread the first 2 parts please? (metal and plastic parts). Thanks!

@RaceInPeaceisHere 2 года назад

Hi there! pls tell me about time position in the VDO :D

@hadynmcloughlin4661 2 года назад

@@RaceInPeaceisHere 4:01

@RaceInPeaceisHere 2 года назад

That is ball bearing oil :)

@sneeking2487 2 года назад

So is the widebody kit for the rx7 and you just made it work for the 3?

@RaceInPeaceisHere 2 года назад

Nah, this is FT86 fenders, pls checking this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fh-1-GiK_6o.html

@BR-nd7yc 2 года назад

🤣🤣 from this video im not look about the chssis, but the bodyshell😍 ,can u make video with 370z bodyshell build your own style?

@RaceInPeaceisHere 2 года назад

Okay, 370Z is already in my choice for a while but I dont know when I can make it haha, thanks for watching too, you make me go on lml/

@BR-nd7yc 2 года назад

@@RaceInPeaceisHere 🤣🤣its oky I just wait for your new video , bcause I already subs , ....yeah most welcme, keep it buddy✌️

@khanapongbabpee3089 2 года назад

ดูหลาบคลิปนึกว่าช่องตปท. เจอ210บาทเข้าไปรู้เลย5555

@RaceInPeaceisHere 2 года назад

555 นาทีที่เท่าไหร่อะครับ 210 บาท ผมจำไม่ได้ละ 555 ขอบคุณที่เข้ามาดูคลิปนะครับผม

@calvinwolf7107 9 месяцев назад

Do these setups not provide a crazy amount of torque twist?

@RaceInPeaceisHere 9 месяцев назад

Just setup by follow a manual

@TheBigjay757 9 месяцев назад

What was the liquid u put on the bearings in the glass and what was the stuff uput onthe plastics. Im building my first kit and no were in book does it say use anything but ball diff grease on the balls n the black grease on the very tiny balls.?? Also how can i tell which ball bearing is which they all look the same size other than the 10x15 even the spacers. Can you or some please help me out

@RaceInPeaceisHere 9 месяцев назад

In the glass is RONSONOL and tiny balls need black grease for assembly, you can check it in manual man

@mo0dz3dprints16 Год назад

Hey can i ask what paint and how many coats ?

@willleopper2852 2 года назад

What kind of battery did you use? I bought one off of eBay and it is too big for my holder

@RaceInPeaceisHere 2 года назад

Try to using short batt for weight reduction

@willleopper2852 2 года назад

@@RaceInPeaceisHere is there a certain brand that's better? Or what's your personal preference

@RaceInPeaceisHere 2 года назад

Try to find ReveD or Yokomo short battery, they are the lightweight batt, less weight go faster and great for transition while drifting

@tomypratomo8060 2 года назад

What red color is this? Tamiya ps15?

@RaceInPeaceisHere 2 года назад

the first layer is Tamiya PS 37 Translucent Red (depend on you need, more layer more dark, less layer more bright) second layer is sparkle metallic spray, I am buying this one in my local store (LeyLand Branding) third layer is silver spray, LayLand too and the last layer is Black matte Nippon paint Branding, I make this way because I don't have any air-brush system so I try to adapt other ways for painting

@tomypratomo8060 2 года назад

Thank you for respons, very beautiful... Is it 2 layer tamiya ps37? Because i tried 3 layer of tamiya ps37 + silver + gun metal the result is more darker than yours..

@RaceInPeaceisHere 2 года назад

Because after ps37 is sparkle so brighten and deep dimension more than silver

@Mike-cx4qf 2 года назад

Hi, where i can buy this pack? Could you send me link plz

@RaceInPeaceisHere 2 года назад

what you mean "pack"?

@hehenelnino 3 года назад

RC Impian n mazda 3 semoga ja mimpi yg nyata di dunia nyata

@RaceInPeaceisHere 3 года назад

Hi, English please ^^

@Aong-lu2un 2 года назад

พี่มีเพจในเฟซมั้ยครับ

@RaceInPeaceisHere 2 года назад

มีครับ

@rcheaven96 Год назад

Wat body and wide body kit?

@RaceInPeaceisHere Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fh-1-GiK_6o.html

@lucalascialfari2048 2 года назад

Che olio metti nei cuscinetti?

@RaceInPeaceisHere 2 года назад

Hi, English please ^^

@lucalascialfari2048 2 года назад

what oil to put in the bearings?

@RaceInPeaceisHere 2 года назад

The ball bearing oil (in this VDO I'm using Kyosho Branding)

@moonzonezturn1471 3 года назад

Input Voltage: 1S lipo esc มันใส่ได้หรือครับ

@RaceInPeaceisHere 3 года назад

ปกติสปีดของรถพวกนี้จะใส่สองเซลนะครับ แต่คำว่า ใส่ได้หรือครับ ผมอ่านแล้วก็งงนะ เพราะในคลิป ผมไม่ได้ใส่

@moonzonezturn1471 3 года назад

@@RaceInPeaceisHere ESC : Team Powers brushless XPS sport 100A V3 speed control w/ LED card Specification: Controls: Forward/Brake/Reverse Input Voltage: 1S lipo BEC: 6V/7.4V selection/max ~3A Motor Limit: 6.5T or over Max current: ~100A per phase Size: ~41x32x18mm (without fan installed) Weight: ~42g (not include wiring and fan) Come with XPS V3 LED card or it can be used with Radon LCD card(need to buy separately)

@RaceInPeaceisHere 3 года назад

ครับผม ผมไม่ทราบสเปคมาก่อน คุณจะลองเอาใส่ก็ได้นะครับเซลล์เดียว แต่ปกติแล้วผมเคยใช้เล่นแต่สองเซลล์ ครับ

@pheeraphonwangsriyawan3423 3 года назад

@@RaceInPeaceisHere ใส่ได้ดิวะ ใส่แบต 7.4 ตามสเปก แถมมอเตอร์ไม่ถึง 6.5T เหลือเฟือ ตั้ง 100A ไม่งั้นสปีดจีน 40 แอม ใส่2S ไม่ปิดโรงงานกันหมดหรอวะ ตลกข้างบนต้องการอะไร ปกติสปีด 1Sไม่ได้ออกแบบมาสำหรับรถกระดาน1/12 อย่างเดียว มันมีโปรแกรมเซตไว้แล้วนะ รองรับ2S ได้แต่ห้ามเกิน 7.4V เออ แอมเยอะของแบ่งมั่งดิของพี่ แอมแค่ 60เองในรถทัวริ่งวิ่งไม่ทันเพื่อนเท่าไหร่แค่เพลทไฟแลบวะ 5555555

@RaceInPeaceisHere 3 года назад

อาาา ผมก็งง ว่าคนถามเขาต้องการอยากทราบอะไรกันแน่ งงครับผมไม่รู้ครับ ผมปัญญาอ่อน

@dreadedgamur5490 2 года назад

When you want to get into this hobby but you start looking up prices.....

@RaceInPeaceisHere 2 года назад

pay the price.....

@dreadedgamur5490 2 года назад

@@RaceInPeaceisHere I'm poor lol

@kizenakt.6651 3 года назад

Chassis looks little bit weird.. FXX Front + RMX upper deck + middle motor mount = FMX (?) Drift chassis layout is so variable that every layout has been done by someone.

@RaceInPeaceisHere 3 года назад

each chassis have various character and style while drifting and transition for battle, for me I think FXX is like real car while playing the most, FMX very fast for transition and RMX YD-2 D5 are rear motor position so they are faster more than FXX or FMX because weight lay out but you can find for best setting to play with your friend, competition or for your hobby time ^^

@pawpatina 3 года назад

while everyone is moving to rear mount motor, MST decided to go the other direction.... this is not more "realistic" and no one will see it any way... makes no sense...

@RaceInPeaceisHere 3 года назад

MST have various layout to play, this is hobby and I am RMX user who play with rear motor conversion 3 years ago, you can go with another chassis man, make your great choice, go with your sense ^^

@pawpatina 3 года назад

@@RaceInPeaceisHere Oh I have a YD-2S, I am just saying its weird they are going mid motor while everyone else is going rear.

@RaceInPeaceisHere 3 года назад

Oh nice and for me, YD-2 E and S are my favorite chassis too, my second chassis is YD-2 E after try with D4

@garybeer9254 2 года назад

I started with an mst rmx 2.0 rear low mounted motor I then switched up and tried high mounted rear motor. That worked and felt better. I now have a plastic mst fxx and a kmw fxx. Both front mounted motor and they handle totally different to the rmx. The rmx I found I had to work to drift the fxx is effortless. The rmx and fxx are 2 totally different chassis and 2 totally different drives.

@RaceInPeaceisHere 2 года назад

Ohh you are MST fans, nice to meet you here lml/