BUILDING! the Pilot-RC Slick 103" 

That transparent cowel is a Fantastic idea 👍

Thanks for the build, nice looking plane. Straight forward looking build, kit looks very well made with most bits supplied. Less time putting together=more flying time!

That's a quick build Martin, pilot stuff, well speaks for itself 👍

Nice flight take care and stay healthy

Hi Martin nice build Video, looking forward to getting mine in December when they get to the uk, looking forward to part 2 of the video.......

Nice one Martin

That was a fast build👍🏻 look forward to the flight.

Good stuff sir...

Can you please please make a video or servos install with matching and full setup! Love your channel and just wanted to let you know how much you inspire and help regular everyday pilots. Thank you martin!!

Great video for getting tips that diffrent people use for building pilot models..

Beautiful! My late friend Glen Dell was an aerobatic champion who designed the full size Slicks right up the road from me. The were actually fully composite based loosely on the Extra 260. I enjoy how you describe and instruct on your builds but the reality is only a handful of your viewers will have this beauty. The rest of us can just dream

I recently just built a second hand MSX-R 55cc and i thought that was big, great video martin🤙🏻

Been waiting for this for a while now!

Nice build video. Those quick releases look pretty slick ;)

What a dream it must be to build one of these and fly it.. wow #goals

finally to get to watch the build of the slick 103" cant wait to watch the slick build like canisters more than pitts muffler

Mi hai fatto venire voglia di prenderlo anche a me 😁

Hi Martin, nice build video! Could you make a video showing off your wiring setup at the tail for the elevator servos (what connector is that?), and how all the Pilot RC quick disconnect systems work and lock in place (stabs, wings, sfgs, and canopy)? Thanks!

Ooh I'd like a smaller version of that plane, you know, the Slick 50 🙃

Martin great videos, Which company supply these sockets head servo screws?

How did you mount the pioneer?, with sticky tape?

I noticed you don't cut away the covering under the control horns, is it not recommended to cut the covering?

well im not a scale flyer im just a foamy person but do you use epoxy to glue most of the vital components?

I am using da120 for this plane. What size if standoff should I use?

Una pregunta.... como has puesto los sideforce de las alas? Porque acabamos de comprar uno y me surge la duda... gracias!

Hi Martin. Mine comes in a couple weeks from my vendor. I'll be putting on a three bladed prop and need to know what size of the spinner that comes with it. That way I can order the new spinner.

Saludos Excelente video! Cual es tu favorito entre el Slick y el Laser?

it seems to me there are many parts that come with the plane that are not used? am i correct. i received the 92" extra 330

I would love to see your skills on a proper scratch DYI project built...

Все круто

G'day Martin I have decided to purchase this amazing model and I have decked it out with savox 1270s and a 2290 rudder servo and an Ar flight box. Basicly putting all the goodies I can think of. One thing I am struggling to find is an answer on a carbon Prop size. I am running a DLE 120 with canisters. Could you please tell me what you found to be the best prop for this plane and motor. Thanks for all your awesome videos Your Aussie Fan Mick

That's the best video on how to build an aircraft I've ever seen! How do you verify where the gravity center is located on large aircrafts by the way?

May we have a parts list for those of us have only bought bnf planes and are looking into our first nice build?

Quite amazed that no reinforcements were done to the engine box / firewall. Considering the amounts of stress the wood is getting during 3D stunts I was sort of expecting to learn a thing or two in this video on how to make those more resistant

Hey Martin Where can I buy the engine standoffs that you have on this model? They use M-5 or M-6 bolts?

Hi Martín, thanks for your videos, they are great, I like the type of flight of this slick 103'', if you have to compare or choose with other similar size gas airplane, like sukhoi, extras or similars, from pilot rc, would you still choose this one? Considering power to weight ratio, how it floats on flight, etc, etc?

Does the slick 67 " needs a gyro? I'll be pre-ordering the slick 67" and I wondered ig gyro its need it. Thanks alot!

GOOD 🤟🤟🤘👍

Hi Martin I have just brought a pilot laser its got alot of carbon in the fuselage im flying futaba will the carbon affect the receiver Cheers Alan

Martin que motor necesita un Slick 74” de Pilot

6:58 what is that tool ????

Just out of curiosity I looked up the smaller than usual throttle servo. $93. These planes must cost thousands of dollars. I had no idea of the cost.

What build?

For a 50CC airplane which one would be the best choice? DA or DLE? I also live in U.S. so I can easily get service and parts for both. Does DLE last as long as DA?

Really nice video Martin, Prop: Falcon 27/11? :)

Awsome, whats the red stuff you put in the muffler bolt? high temp silicone gasket or Loctite for high temp?

Hi Martin! The Prop-Center seems wide out of the cowl-center :-( ... i would highly recommend to mark the mounting position of the engine with an upright fuselage

never been this early

beautiful airplane! im ordering the 78 inch version! where do you purchase the servo connectors/wire that you used to make up extensions and connections? Thanks for your time!

What is that red product applied to the exhaust mounting threads on the cylinders?

Hi Martin, what s the best setup for a pilot 92", mono 60 or twin 60?

Martin, I am working on a 78" ExtraNG and it came with four wood screws. In your video I saw the same screws screwed in the firewall. Am I supposed to screw them into the firewall like yours? I couldn't find any clear info on this.

Lol I just brought one 2 days ago

Hi Martin, love your Work! Why exactly did you install just one Servo for Rudder? Would love to hear your philosophy behind the idea! :)

algun dia voy a comprarme un avion haci

where I can get breather valve from ?

What are you using on the bolts so they don't become loose?

Hey Martin soy Jose del club CAT de Torrente, cuando es el estreno de este avión. Un saludo.

Do you teach me rc plane making

That airplane looks really nice, do you think it wil work good for IMAC flying?

hi, im getting into rc planes, do you recommend this as a first rc plane?

Martin, why did you decide to use only 1 rudder servo?

Beautiful plane. Is that a printed scheme or traditional oracover/ultra-cote?

A Gasolina

Awesome video as usual Martin. You’re actually getting me excited about rc planes. Have been flying helis for many years but now getting taste of plane flying. Can i have a question please? What’s the overall best size for electric plane if want to get serious? Thank you very much R

Kind of cute that your still using gas! :)

Очень нужны подпищики в декабре начинаю новый проект выдео выдит примерно середине января..

ASSEMBLY is not building it is not a kit it is an arf

Nice looking model and flow realy well. BUT HOWE CAN YOU SAY LETS START BUILDING . ITS SOME THING MANUFACTURERS HAVE BUILT AND ALL YOU ARE DOING IS BOLTING THIS THING TO GEATHER. AND FINISHING THINGS THAT THAY CAN'T BE BOTHERED TO DO. PLEASE GUY'S BE PROUD OF OUR HOBBY AND WHAT YOU ACHIEVE NOT SOME BIG COMPANY OUT THERE TO JUST MAKE MONEY . BUILD YOUR OWN FROM PLANS . KEEP THIS GREAT HOBBY AS IT SHOULD BE. THINK OF THIS ITS LIKE GARAGES YEARS AGO THAY WOULD REPAIR YOUR OLD PART NOW ITS BOLT A NEW BIT ON. THAY ARE NOT MECHANICS THAY ARE (FITTERS.) AND IF YOU CAN HOLD A SPANNER IN THESE DAYS YOU ARE CALLED A MECHANIC ! ? AND WITH THESE R.T.F. MODELS ITS NO DIFFERENT. PLEASE GUY'S GET COMPLIMENTS ON YOUR OWN WORK. ALL THE BEST HAPPY FLYING.