Тёмный
No video :(

Building the ScottoFrog Handwired Gaming Macropad 

Joe Scotto
Подписаться 14 тыс.
Просмотров 11 тыс.
50% 1

Roughly 6 months ago I was commissioned to build something similar to the discontinued Frogpad. The board is called the "ScottoFrog" and can be a Bluetooth wireless single-handed keyboard or gaming macropad. I printed the keycaps and case using the "Fuzzy Skin" setting which makes the board look like concrete.
Find out more about the project: scottokeebs.com
Donations are greatly appreciated: bit.ly/41odBEu
Patreon: / joe_scotto
~ Links ~
Akko Crystal Silvers: amzn.to/3LWRorS
Deburring Tool: amzn.to/48MjXlB
Stabilizers: amzn.to/3FgcLQR
Matte Filament: amzn.to/3RVzSYJ
Magnet: amzn.to/3QdY3jN
~ Handwiring Tools ~
TS100 Soldering Iron: amzn.to/3LCsrkb
D24 Chisel Tip: amzn.to/3VFxiES
63/37 Solder: amzn.to/3uBlMPu
Wire Strippers: amzn.to/3LZez4F
~ Handwiring Parts ~
1N4148 Diodes: amzn.to/3Ccljbb
16g Copper Wire: amzn.to/3xLDVvJ
Raspberry Pi Pico: amzn.to/3HglCVb
Arduino Pro Micro: amzn.to/3HkR9Fn
Ethernet Cable: amzn.to/3uyaOKr
M2x6mm Screws: amzn.to/3UI1bDH
M2x8mm Spacer: amzn.to/3Y4KzJ3
M2 Heat Set Insert: amzn.to/3WjklB9
Durock Stabilizers: amzn.to/3FgcLQR
~ 3D Printing ~
Ender-3 Pro: amzn.to/3VIWryL
Ender-3 Max: amzn.to/3PQOHsP
PEI Magnetic Bed: amzn.to/3Hi7URx
Dual Z Upgrade: amzn.to/3h7DTJy
BLTouch Auto-Leveling: amzn.to/3UGEBv8
Sonic Pad: amzn.to/3ZQa7ea
Deburring Tool: amzn.to/48MjXlB
Elegoo Filament: amzn.to/3rG3T4f
~ Favorite Cheap Switches ~
Gateron Milky Yellow: amzn.to/3Bk0Cci
Akko Lavender Purple: amzn.to/3VJy440
~ Social ~
/ joe_scotto
/ joe_scotto
ko-fi.com/joe_...
~ Community ~
ScottoKeebs Discord: / discord
Handwired Keyboards Reddit: / handwiredkeyboards
~ Disclaimer ~
Some links may be affiliate links where I will make a small commission. Unless otherwise stated, nothing in this video was sponsored by any outside party and I wasn't paid for the content in this video.
#mechanicalkeyboard #arduino #qmk

Опубликовано:

 

21 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 39   
@joe_scotto
@joe_scotto 10 месяцев назад
Now if only I could figure out how to print switches 🤔
@bananabased
@bananabased 10 месяцев назад
uh oh 👀
@mohanpatle3209
@mohanpatle3209 10 месяцев назад
if it doesn't tear itself apart after a few strokes I'd be drowning in switches
@joe_scotto
@joe_scotto 10 месяцев назад
There are some designs out there. I would probably try incorporating them into the plate.
@CrashTestZombie-mx3nj
@CrashTestZombie-mx3nj 10 месяцев назад
i'd definitely go with resin for that 😅
@tikintikinson1188
@tikintikinson1188 3 месяца назад
it would be really cool if someone use galvanoplasty (Electrotyping) with 3D printable parts, not only for some cosplay props, but for some technical applications:) i mean that something like 3D printed springs is already exists, so why not to try make conductive parts of switch to combine all together and try to get some experimental full diy switches? maybe it would be intresting challange... what if in the future we will have like openscad files with all params and able to print switches and make parts conductive and play with this a bit if someone had a time machine please tell us how is it going in the future!
@mjblais16
@mjblais16 10 месяцев назад
This is great! I've got all the components for a handwired board, now I just need to actually start assembling. Your videos have been super helpful for pointers and ideas.
@joe_scotto
@joe_scotto 10 месяцев назад
That’s great to hear! Make sure to send me some photos when you build one, i would love to see :)
@MrSergpank
@MrSergpank 10 месяцев назад
a really cool tool for bending diodes, thanks for sharing
@jacktheluth4083
@jacktheluth4083 10 месяцев назад
You came along at the perfect time! I just started putting together a list of components for a cyberdeck build and a frogpad was on the list. So happy that I can get one without dealing with my terrible circuit design skills.
@MrZachzippo
@MrZachzippo 7 месяцев назад
I've been intrigued for years with the frog pad along with other one handed keyboards. I'm looking forward to getting the 3d printed components from your store and building it myself.
@FlexStudioPL
@FlexStudioPL 10 месяцев назад
Awesome work like always. Thank you for updates. One day i will jump and try to make my own :)
@stefan000
@stefan000 10 месяцев назад
Saw the thumbnail and I was wondering why you're using egg cartons for keebs now, this makes more sense now, lol
@joe_scotto
@joe_scotto 10 месяцев назад
ScottoEgg
@overvoltagestudio
@overvoltagestudio 10 месяцев назад
Oh man, yeah platemount stabs on 3DP plate is such a PITA. Never been able to get mine tuned right. I usually use a tiny file to correct the fitment but I still find it impossible to get them up to the standard of pcb mount stabs. Cool project man! I love the little diode twisting jig, will definitely need to make one of those myself!
@joe_scotto
@joe_scotto 10 месяцев назад
Yeah, they can be obnoxious and only more annoying as they get longer
@erictrinque6513
@erictrinque6513 10 месяцев назад
great video bud. elephants foot compensation setting in slicer or first layer inset/offset width can sure those elephants foot problems in a jiff
@MrSamucbr
@MrSamucbr 10 месяцев назад
Wow really cool! I may give it a try
@Corphish_
@Corphish_ 10 месяцев назад
Loved the upload man❤
@joe_scotto
@joe_scotto 10 месяцев назад
Glad you enjoyed it :)
@anz507
@anz507 10 месяцев назад
cool build
@streetdogarg
@streetdogarg 10 месяцев назад
looks like a eggs container, or a antique concrete rune of mayans, but LOOKS GREAT !!!
@joe_scotto
@joe_scotto 10 месяцев назад
A few people have been telling me it looks like an egg carton 😂
@speakoid
@speakoid 2 месяца назад
Do you have the STL for this coiler on your github? I found the file for a different one but didn't understand how to use that one. I love your content and I'm currently about to start wiring my first 3x3 macropad following your guide!
@joe_scotto
@joe_scotto Месяц назад
Yeah, it's under the Extras folder.
@bernatrosello4375
@bernatrosello4375 10 месяцев назад
not sure why but I can't seem to save this video to one of my private palylists :(, or my Watch Later for that matter.
@brucepugh1536
@brucepugh1536 10 месяцев назад
Will you be able to program the "chorded" keys like the frogpad?
@joe_scotto
@joe_scotto 10 месяцев назад
The ZMK wireless keymap mimics the FrogPad including combos.
@mankudin_
@mankudin_ 4 месяца назад
is there any 3d file of the keycaps?
@joe_scotto
@joe_scotto 4 месяца назад
Extras -> ScottoCaps -> Flat: scottokeebs.com/github
@anaplayz9534
@anaplayz9534 9 месяцев назад
What is the software you are using at around 8:45?
@joe_scotto
@joe_scotto 9 месяцев назад
Vial
@joaovitormiranda1570
@joaovitormiranda1570 10 месяцев назад
Hey Joe, can u share the stl file of this keycaps?
@joe_scotto
@joe_scotto 10 месяцев назад
Yeah, they’re just on the repo: github.com/joe-scotto/scottokeebs/tree/main/Extras/ScottoCaps/Standard
@CrashTestZombie-mx3nj
@CrashTestZombie-mx3nj 10 месяцев назад
niiiiiice. my goal is to make my first ScottoFrog this weekend :3 you'll see my fork! I might even try to color-theme the case & switches for Cyberpunk 2077 for (> ͡° ᴥ ͡°)> i m m e r s i o n
@orbatos
@orbatos 10 месяцев назад
This largely misses the point of the original, a pocket sized portable device. They were even good on an arm band.
@joe_scotto
@joe_scotto 10 месяцев назад
I also have wireless firmware available for it that exactly mimics the original layout of the Frogpad. I just don’t have a use for that so I made it into a gaming pad.
@orbatos
@orbatos 10 месяцев назад
@@joe_scotto That's cool, I'm just pointing out the original was a very different thing. It was terrible in some ways too, but membrane switches allowed it to be thin, modal input allowed for "decent" one handed use and it's primary application was mobile industrial or administrative tasks like working in a warehouse, construction, military, etc. Think PipBoy (there are actual products like that).
Далее
How to Build a Handwired Keyboard
22:01
Просмотров 127 тыс.
How to Build a Wireless Lily58 Keyboard
14:42
Просмотров 51 тыс.
Italians vs @BayashiTV_  SO CLOSE
00:30
Просмотров 3,5 млн
Новый фонарик в iPhone с iOS 18
00:49
Просмотров 375 тыс.
How to Design Mechanical Keyboard Plates and Cases
11:16
Testing The CHEAPEST Macropad on Amazon!
6:14
Просмотров 54 тыс.
I took Taser Chess to Open Sauce
12:40
Просмотров 346 тыс.
I Built My Dream Keyboard from Absolute Scratch
21:52
Просмотров 655 тыс.
I Made A Customized Modular Keyboard !
12:53
Просмотров 361 тыс.
I Tried The LEGO Keyboard... (So You Don't Have To...)
16:35
Italians vs @BayashiTV_  SO CLOSE
00:30
Просмотров 3,5 млн