Тёмный
No video :(

How to Build a Wireless Lily58 Keyboard 

Joe Scotto
Подписаться 14 тыс.
Просмотров 50 тыс.
50% 1

This video will go through all the steps to build a wireless Lily58 mechanical keyboard. The steps shown apply to both low-profile Choc and MX variants for the Lily58. The board I'm building here is powered using nice!nano controllers and features nice!view displays.
You can buy the Lily58 wireless kit over at: typeractive.xy...
Build Docs: docs.typeracti...
~ ScottoKeebs ~
Find out more about the project: scottokeebs.com
Donations are greatly appreciated: bit.ly/41odBEu
Discord: / discord
Patreon: / joe_scotto
~ Handwiring Tools ~
TS100 Soldering Iron: amzn.to/3LCsrkb
D24 Chisel Tip: amzn.to/3VFxiES
63/37 Solder: amzn.to/3uBlMPu
Wire Strippers: amzn.to/3LZez4F
Electric Screwdriver: amzn.to/45Jxg3v
Heat Tape: amzn.to/45J7tZ5
~ Handwiring Parts ~
1N4148 Diodes: amzn.to/3Ccljbb
16g Copper Wire: amzn.to/3xLDVvJ
Raspberry Pi Pico: amzn.to/3HglCVb
Arduino Pro Micro: amzn.to/3HkR9Fn
Ethernet Cable: amzn.to/3uyaOKr
M2x6mm Screws: amzn.to/3UI1bDH
M2x8mm Spacer: amzn.to/3Y4KzJ3
M2 Heat Set Insert: amzn.to/3WjklB9
Durock Stabilizers: amzn.to/3FgcLQR
~ 3D Printing ~
Ender-3 Pro: amzn.to/3VIWryL
Ender-3 Max: amzn.to/3PQOHsP
PEI Magnetic Bed: amzn.to/3Hi7URx
Dual Z Upgrade: amzn.to/3h7DTJy
BLTouch Auto-Leveling: amzn.to/3UGEBv8
Sonic Pad: amzn.to/3ZQa7ea
Deburring Tool: amzn.to/48MjXlB
Elegoo Filament: amzn.to/3rG3T4f
~ Favorite Cheap Switches ~
Gateron Milky Yellow: amzn.to/3Bk0Cci
Akko Lavender Purple: amzn.to/3VJy440
~ Social ~
/ joe_scotto
/ joe_scotto
ko-fi.com/joe_...
~ Community ~
ScottoKeebs Discord: / discord
Handwired Keyboards Reddit: / handwiredkeyboards
~ Disclaimer ~
Some links may be affiliate links where I will make a small commission.
~ Timestamps ~
0:00 - Intro
0:30 - PCB
0:46 - Controller (nice!nano)
3:34 - Display (nice!view)
5:35 - Desocketing
6:09 - Battery
6:58 - Left Half
7:20 - Case Assembly
10:13 - Keycaps
10:35 - Firmware
13:46 - Typing Test
14:09 - Outro
#mechanicalkeyboard #lily58 #zmk

Опубликовано:

 

14 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 64   
@joe_scotto
@joe_scotto 9 месяцев назад
Thanks to Typeractive for sending me over this board to check out and build! They gave me a coupon "SCOTTOLILY58" to pass along that will get you 5% off for the next 2 weeks on typeractive.xyz
@47AK.
@47AK. 9 месяцев назад
The more videos I see, the more tempted I become to attempt to build a keyboard.
@purplelord8531
@purplelord8531 9 месяцев назад
start with a macropad. resist the urge to start split or start with a custom layout (like I'm doing right now)
@47AK.
@47AK. 9 месяцев назад
@@purplelord8531 thanks for the advice
@mbaluyot4
@mbaluyot4 6 месяцев назад
May I know if you have an in-depth video on how to customize the screens to show like the battery life, paired device, etc?
@wadeduvall7026
@wadeduvall7026 9 месяцев назад
FYI, they do offer the acrylic for the Corne (at least, now they do). It looks a bit different but I love it. NGL I never ever buy sponsored stuff but I ended up going with Typeractive. They're great and involved in a lot of the open source HW development (like nice!nano). They're the only ones that offer all the surface mount stuff already attached w/ the wireless Corne board... at least that I could find. And its only a few bucks more than Boardsource's unsoldered board + all the parts.
@user-pp7vn9oj7r
@user-pp7vn9oj7r 7 месяцев назад
i have problem with the "ctrl+a" & "crtl+s" & "ctrl+f".These functions do not exist . is there any body with my problem?
@faratrader3802
@faratrader3802 6 месяцев назад
i have this problem too
@erfansiasi
@erfansiasi 6 месяцев назад
i have this problem too
@rezahonarmand8239
@rezahonarmand8239 6 месяцев назад
i have this problem too
@DE0R4
@DE0R4 9 месяцев назад
This will be the 3rd keyboard of your I’ve made!
@stufflike5844
@stufflike5844 18 дней назад
Is there any keyboard of this type of build that has a 2,5 GHz connection?
@eustache_dauger
@eustache_dauger Месяц назад
Was wondering if it's worth incorporating a qi wireless charging receiver, so there's an option to charge it wired or wirelessly 🤔
@geetarstar
@geetarstar 9 месяцев назад
Are there any controllers that have 2.4ghz built in that can pair with a usb dongle? Or is it only BT? Nice and concise video!
@joe_scotto
@joe_scotto 9 месяцев назад
I believe there are controllers out there with 2.4ghz but I’m not sure if they’re compatible with Pro Micro footprint boards.
@akemrir
@akemrir 2 месяца назад
Nice build, very interesting. Do you know whereI could find similar keyboard but with metal plate and metal case?
@peastfist1602
@peastfist1602 9 месяцев назад
I know it is a bit out of topic, but do you have any suggestion on how to make plate base and casing on our own pcb design ? And what software that are free to use instead of the premium one because it is just 1 time only for me ? Thanks
@parallacksg
@parallacksg 9 месяцев назад
You should check out his other videos there's at least one that covers making a plate and case for a keyboard
@peastfist1602
@peastfist1602 9 месяцев назад
@@parallacksg i cant find the one with custom pcb. Indeed there are alot with custom case but they are handwired
@joe_scotto
@joe_scotto 9 месяцев назад
The concepts for cases / plates remain the same regardless of if a PCB is used or not. The only real difference is that with a PCB you can often get away with making the case a bit thinner as you don't have to account for the wiring.
@peastfist1602
@peastfist1602 9 месяцев назад
@@joe_scotto I dont understand , of course the concepts is the same if we talk about the function etc, but the problem is , I dont know how to make one and aligned the hole with my pcb design.
@Omikronik
@Omikronik 9 месяцев назад
I wish i could get leaded solder in europe :( 280c doesnt even melt the unleaded solder...
@SeraphX2
@SeraphX2 9 месяцев назад
i don't get why anyone still makes flat head screws anymore. it's outdated and annoying.
@EduardoRodriguezRocks
@EduardoRodriguezRocks 2 дня назад
When I plug mines it just starts as a keyboard, clicking reset does nothing, the drive never appears
@joe_scotto
@joe_scotto 2 дня назад
Double click reset.
@DoTienThuatQP
@DoTienThuatQP 9 месяцев назад
Hi! With the above battery capacity, how long can the keyboard be used?
@SeraphX2
@SeraphX2 9 месяцев назад
yes. acrylic was (is) an option at the time you made yours.
@streetdogarg
@streetdogarg 9 месяцев назад
nice build, great tuto, thanks !
@wormholecowboy
@wormholecowboy 9 месяцев назад
Do you have any videos on ordering all the parts yourself, how to get a case, where to get them, as opposed to using a kit?
@Roobotics
@Roobotics 9 месяцев назад
I can appreciate that they made the MCU/battery/screen one super small assembly.. but from an RF stand-point that's terrible, lol. Basically building a little faraday cage around the wireless transmitter. Probably still works reasonably fine though, so it's a poor faraday cage at least.
@joe_scotto
@joe_scotto 9 месяцев назад
I don't notice any issues with connection and my computer is in a bad spot compared to where the board is when I'm using it. There is a setting in ZMK that boosts the Bluetooth power.
@JT-hh2ik
@JT-hh2ik 9 месяцев назад
Great informative video! Would you say there is any noticable latency on the wireless versions?
@joe_scotto
@joe_scotto 9 месяцев назад
Nothing noticeable while typing but I definitely wouldn’t game with it in wireless mode. You can plug it in over USB to get lower latency.
@JT-hh2ik
@JT-hh2ik 9 месяцев назад
@@joe_scotto Thank you Joe!
@RooseveltErubey
@RooseveltErubey 9 месяцев назад
It is beautiful, where can I buy it already assembled? Is it hard to do it yourself if you have no experience?
@ronsone8373
@ronsone8373 6 месяцев назад
Anybody know where to find stl for bottom and plate?
@rosmaraldimanagitalibi246
@rosmaraldimanagitalibi246 20 дней назад
*Puts on socket to make micro controller removable. Proceeds to use tape to hold next socket in place instead of removing micro controller.
@rikesraggy7393
@rikesraggy7393 9 месяцев назад
Could you use the pcb with a pro micro and use it wired instead? I like the pre soldered pcb.
@joe_scotto
@joe_scotto 9 месяцев назад
Should be able to, the nice!nanos are just a drop in replacement for the Pro Micro. I would recommend reaching out to Typeractive directly to make sure though.
@BB-or7rk
@BB-or7rk 9 месяцев назад
Curious about the height from desk to top of dsa keycap. I'm looking for something more low profile than my current build.
@joe_scotto
@joe_scotto 9 месяцев назад
Probably about 30mm at most, they also have it available in a Choc variant which is about as low profile as you can go.
@rodolfonetto118
@rodolfonetto118 5 месяцев назад
Can I buy only half? Can I use my own switches (Cherry MX)? Thanks!
@noisycarlos
@noisycarlos 5 месяцев назад
Yes, they have an MX version, and you can use your own switches
@iNemoden
@iNemoden 4 месяца назад
Can they be used as wired (just in case I run out of charge)?
@joe_scotto
@joe_scotto 3 месяца назад
Yeah, when you plug them in they default to wired mode while charging. It also lowers the latency if you want to game with them.
@silvahawk
@silvahawk 9 месяцев назад
Could you share the code for the oled graphic setup on both sides?
@joe_scotto
@joe_scotto 9 месяцев назад
It’s built in to the firmware when you fork it, I haven’t done anything with ZMK displays on my own yet but plan on it one day.
@aqbar135
@aqbar135 5 месяцев назад
How long does the battery last on full rgb?
@joe_scotto
@joe_scotto 4 месяца назад
This board doesn't have RGB. If it was, it would be highly dependent on the size of your battery so anywhere between a few minutes or a few days is likely.
@RoushonZadid
@RoushonZadid 9 месяцев назад
I was thinking that chord typing is possible in keyboards..like piano teach us how to make chord typing keyboard...excited to see you do it
@krige
@krige 6 месяцев назад
Does it support choc switches?
@joe_scotto
@joe_scotto 6 месяцев назад
They have a Choc option.
@wolves2.075
@wolves2.075 8 месяцев назад
is this lightspeed wireless
@joe_scotto
@joe_scotto 8 месяцев назад
Bluetooth
@wolves2.075
@wolves2.075 8 месяцев назад
Can you please make one that is 2.4 GHz has low response time
@cobralyoner
@cobralyoner 8 месяцев назад
nah lets be real here for a second flathead screws don't do anything for looks its just lazy to not include hex or torx screws
@lucassrossi
@lucassrossi 9 месяцев назад
Joe, for gods sake, pls, make a video showing a easy way to program keyboads in something like a esp32. PLEASEEEE!!!!!
@jogicodes
@jogicodes 6 месяцев назад
Can this be made wired instead?
@joe_scotto
@joe_scotto 6 месяцев назад
Yes, you should be able to substitute the nice!nanos for Pro Micros.
@jogicodes
@jogicodes 6 месяцев назад
@@joe_scotto Cheers, appreciate it.
@adamrodriguez7598
@adamrodriguez7598 3 месяца назад
Can’t you use the nice!nanos wired to the computer too?
@kristen4954
@kristen4954 8 месяцев назад
Promo-SM 😌
Далее
The TOTEM Wireless Keyboard
14:21
Просмотров 53 тыс.
ВОДЯНОЙ ПИСТОЛЕТ ЗА 1$ VS 10$ VS 100$!
19:09
I Built My Dream Keyboard from Absolute Scratch
21:52
Просмотров 574 тыс.
Building the ScottoFrog Handwired Gaming Macropad
9:17
I Tried a Disney Secret Project!
11:33
Просмотров 7 млн
The Wireless Corne Keyboard
5:02
Просмотров 109 тыс.
The Charybdis Wireless Keyboard
10:45
Просмотров 441 тыс.
This Split Keyboard Uses VGA
5:25
Просмотров 31 тыс.