Building the Voron 2.4 : Part 1 the frame 

“The only printer you can’t buy”. That’s genius.

The drilling and the tapping may be "boring" but super important to a proper build! Everyone is not experiencing at either drilling or tapping!

Great stuff Richard! Looking forward to this build!

My kit's on its way and I watched your videos a couple times. Great content! Subscribed.

this exciting lol Voron catching on like crazy

I can't find second part. It's available?

Please cover in detail the CoreXY belts and pulleys. That is an area I still can't figure out how and why it works. Thanks.

With how critical squareness is to building a 3d printer, and especially one of these, I wonder why right angle gussets with holes for machine screws into T nuts aren't far more prevalent. Just put everything together with maybe a 1/4 turn of slop, start going around and gently tightening everything, and watch it self align to within a few milliradians. As long as the frame members' lengths are accurate you'll be golden.

How is it going? Tried looking for the next video without success. Did you give up on it?

Voron for the win!

You ever finish this build?

Thank you for the excellent presentation. Your patience and attention to detail is refreshing compared to hosts of some other VORON build channels. Hope you don’t mind several comments. I have a VORON 2.4 frame in transit from Printed Solid in the US. They are a reputable VORON parts supplier recognized in the VORON community. [Note: Join the VORON Discord channel before deciding to build a VORON. You should be an experienced builder.] Unless you have good machinist stills and proper tools such as this host, I do not recommend drilling and tapping your frame, or cutting from stock extrusion. Instead buy a frame pre-cut, drilled and tapped. Don’t feel you have to buy Misumi frame extrusion directly from them. There are complete frame kits available in a variety of colors from several other respectable companies, like LDO. Do try and stay away from some Aliexpress frames and complete kits where the extrusions might not meet spec with poor machining. Always make sure each extrusion is flat and straight irrespective of the source. Some are not. Square Alignment. You're the first VORON frame builder focusing on the critical need to align and square the frame; even from noted experienced VORON builders. Errors in alignment of components, and sub-assemblies are cumulative. That is, the sum of the errors of all the assemblies makes it near to impossible to troubleshoot problems later. Square. Be meticulous. Square, relax, and come back later to square again until as precise as possible. No rush. This is the baseline alignment for your complete build. Rather than using a carpenters square, it's best to use a heavy machinist square built to industry “accuracy” specification working with metal, along with good clamps. Carpenter and other squares used for construction and DIY do not guarantee accuracy to this level and could be slightly off. There are videos on RU-vid teaching you how to square your square because it's such an issue. Better yet, just buy one as part of your project build budget. Don’t skimp. As noted, assemble on as perfectly of a flat surface you can find, such as a kitchen counter top. I found out on previous frame builds that even using a sheet of 3/4” plywood does not guarantee accuracy, or even a random table top. It's more difficult to find a reliably accurate flat surface in your home than you would expect. If you've never built a 3DP from parts before with limited instructions and advice form hobbyists who are not experts, do not build a VORON. There are no approved build kits. Instead begin with a PRUSA MK3 where you get superb instructions and EXPERTS are there to help you. Experience assembling Chinese printers out of the box does not quality you. Finally. For those who entered 3DP from the world of the Chinese printer community with little exposure outside of these printers and their RU-vid user channels, please research and study the history and philosophy of the 3DP RepRap and open source movement for which you're moving into if deciding to build a VORON. It's great and helpful background.

good video. Is it normal for the frame to have a slight baby wobble? When I have it on my table a certain way it wobbles slightly but I have not been able to get it more perfect than this after spending HOURS trying to, just wondering if this is normal

Is there a part 2?

I have always checked for the squareness on the inside of my build..... I don't have the best way to cut my extruded rails so if my cut is not totally square then it will mess up the inside.... have you checked the squareness on the inside of this or just the evenness on the outside. I haven't cut my extruded rails yet that's why I ask because the way you show it now has me confused. I'm starting this build as well and would like to follow along with you. Also, I ordered the 2020 extrusions and the 3030 enough to build the printer which one do you think I should use? When I started planing this build I started down the path of the HevORT guy and it looked like he was using 3030's so that's what I ordered but then further into my research I found the Voron 2.4 and fell in love with the build guide LOL. That's why I'm in this mess now.

Where did you get the parts? I'm looking for a complete or almost complete kit. Thanks

how do you order parts to make this 3d printer??

and links for item you use in this build?

Are you going to upload more?

What is the cost for the frame.

How much does a build cost?

If I'm working on a flat table, I would use the table to get all the pieces square and flush. IOW, I'd work on the bottom instead of the top like you did..

Great video, but the drilling and tapping would be important to cover for new people. Warts and all, etc

They stopped at the frame and never uploaded any more, does that mean the voron is kaputz?

If this printer is not best for a newbie to building a 3D printer, which one is?

What the heck. I watch this thinking I’m going to watch the whole series and there’s nothing more???

last video on Voron was 3 weeks ago and no update...

why cant you buy it?

Step 2: draw the rest of the owl.

at 16:45 you said the last 3 extrusions are for Y and Z axis. as nothing to do with Z axis

There are variants of hypercube designs which can't be bought either -- kits for these community projects are available, but fyi, I built/designed a quad independent extruder 600mm cubed box monster -- can't buy that either, a 6' delta with a flying extruder and a high flow mosquito nozzle, and no it's not for sale either. Good to see vorons becoming more popular though