Bumper Scuff & Plastic Trim Repair (without Paint) 

Great job. Very straightforward and detailed/concise. Thank you.

Stellar job. I have a scratch in the black wheel trim plastic on my car; this video was very helpful.

Nice exactly what I was looking for thx! Weekend projects!

The products you used I have not heard of! It would help viewers if you could suggest where one can purchase these products! I tuned onto your blog as I have a minor scuff on my wing! Great how you removed most of the damage, yet your blog never lived up to what you stated in repairing scuffs without the use of paint!

Nice work great video. Thank you for sharing.

Nice job lad great improvement👍😊

brill ! saved me a lot of money on professional repair..

Very useful - thanks!

Thank You! Be Blessed!

I did something similar in my 2003 CRV. Trying to pull into a parking space and not hit a £120k Range Rover, sadly I just touched the brick wall and it looks the same as your damage. I have a colour match touch up paint for the bad areas but may need lower grade wet/dry sanding paper as I only have 1200 and 2000 grit. When I wash my car I use Aito Glym plastic and bumper gel which should work just as good after sanding the black plastic

Not bad at all! I hit my 4runners fender flares on a concrete wall coming out of my garage and was looking for a way to fix the scratches I got. This may work very well for my application as the material is much like the jukes fender flares all along the bottom

Regarding plastic trim a trick ive used in the past to remove marks, use a heat gun on a low to medium heat you will be amazed to see the " grey scuffed" plastic change to black again

tip for the trim, if it's plastic. sand it w/ increasing -> fine sand paper, then heat torch it to resurface it. (or use trim restore kit)

Hi thank you- wasnt clear about the angel wax regenerate. Didnt you need to put paint in first to fill in the deep scratches?

Great video. I could live with that

Nice job!

great inexpensive fix!

As a DIY approach you managed to get a very good result, the majority of pro detailers can charge you easily 300 quid for it and for the same result or slightly better. Now you working on a Nissan which typically have softer clearcoat then let's say a Golf or an Audi, which can make the job a fair bit harder. But still very good job!! You didn't cowboy it like most other DIY-ers on the Tube which I like, used the right tools in the right order. 👌👌

Impressive.

Hi there which sander paper are you using? 500? 🙏🙏🙏

I’ll try your technique on my plastic bumper trim.

Have you tried Rubbing compound before using sandpaper?.

Awesome work! Do you mind listing the products you used ?

Good one

Actually looks good and i think your paint color number is inside drivers door and a light paint stick touch up on the 2 remaining scratches and good to go😁 but im a dummy so i dunno😁

You're the best

My bumper looked all smudged after following his advice. Thankfully a fresh coat of clear coat fixed it

I will definitely try this, looks exactly like my motor

Good

Wow - come round mine please !

What grit is the sand paper? Great job!

what sandpaper are you using ?

Hi Where we can get the paper that was used ??

no way im going to like and subscribe a video like this!

1000th like

2000 grit wet and dry sandpaper

What grade of wet *& dry did you use for the paintwork, please?

Sorry but I coudnt hit sub button because of the last name of the uploader 😂😂😂

What product you have used for plastic trim repair?

2000 wet and dry

The polish will wash off, so you'll have to keep polishing it for the rest of your life. Applying a clear coat would be better.

Use acetone

i would have replaced that plastic trim. it will de value the car if not done properly at time of sale. plastic trim restore never gets it 100% right. But if that's your budget, better than this example.

But u showed d real

Why didn't you just use WD-40?

Put toothpaste on it

Залипуха.

nope not up to std

Cant you just use that magic polish straight away, skip all the sanding lol

Well that was clickbait. Came for a repair video got nothing.

God is coming back soon pls all repent of your sins

It's not repaired, it's just less visible than before. If it's a leasing car you will pay for when return. So for me it' waste of time.

Maybe if you were to use a piece of paper and not a tiny little piece?? is there a sandpaper shortage?

Looking at that it's been spray (badly) before!!!! You can clearly see the crap quality and runs in the paint as you were sanding...!

So you've left it with highly visible scratches in lol .... not sure what you were trying to achieve here 😅