@@KennysTreeRemoval Like in very similar, because his videos seem like they have been inspired by Andrew Camaratas videos... Nothing against him though
The trailer looks AWESOME Jesse! Great work! Isn't it nice to have something turn out so well after you put all that sweat equity into it? I enjoy that! Now you can put that bad boy to work for years to come!
For all you young guys out there who think they can lift the world and tote it around I thought the same. Now at 62 my back isn't worth a damn. Can't pick up much more that a matchbook. Use your head and not your back. Glad to see the you had help when you replaced the hubs. I painted a 18 foot trailer with a roller and brushes once. Won't do that again. Good job and good looking trailer. Should give you years of service.
When I saw a thumbnail "Fixing a trailer" and it's over an hour long, I just grinned and ordered a pizza. I know it's hard work fixing these things you probably didn't like it at all but I enjoyed watching all of it!
Msgt D Oorah Today TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14 ... REMINDER: The Sins of Your Fathers ... WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN . SLAVES SOLD TO PEDOPHILES (that may be working next to you).... WHERE ARE THE CHILDREN GOING!!. Share this message please. They are covid positive and being release into your UNITED STATES FOR AMERICA ..."WAKE UP PEOPLE" . ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE, "LISTEN" "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING✝" We The Few are back were banned ... thank you JC KAY , some of my troops are like you .. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY.. OORAH!! " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE. ✝" " ✝💖THEY WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA! " ""Freedom is not Free'''''. DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself, We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news . PROTECT your Children/your People. Be Calm. Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM. JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP MAYBE NEVER see the light/truth, feel G'D love. Demonrats, See what your Horror and Hate have done to the innocents , THAT WE WITNESSED. Investigate this information and release it to the world , if you care to, and believe, ALL our lives matter. ✝UNITED STATES FOR AMERICA✝
Msgt D Oorah Today TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14 ... REMINDER: The Sins of Your Fathers ... WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN . SLAVES SOLD TO PEDOPHILES (that may be working next to you).... WHERE ARE THE CHILDREN GOING!!. Share this message please. They are covid positive and being release into your UNITED STATES FOR AMERICA ..."WAKE UP PEOPLE" . ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE, "LISTEN" "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING✝" We The Few are back were banned ... thank you JC KAY , some of my troops are like you .. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY.. OORAH!! " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE. ✝" " ✝💖THEY WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA! " ""Freedom is not Free'''''. DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself, We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news . PROTECT your Children/your People. Be Calm. Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM. JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP MAYBE NEVER see the light/truth, feel G'D love. Demonrats, See what your Horror and Hate have done to the innocents , THAT WE WITNESSED. Investigate this information and release it to the world , if you care to, and believe, ALL our lives matter. ✝UNITED STATES FOR AMERICA✝
A great 'gettr dun' flick... highlites the true application of "shade-tree mechaniCan". Impressive accomplishment! I've seen extremely shoddy work come outta TahjMahal shops that didn't have any craftsmen near your obvious capabilities. Enjoyed the knowledge shared and appreciate you having done so. Eager to catch more of your endeavors.
Really can’t understand why the algorithm is keeping you down but I’m glad I found this channel last year. Appreciate and relate to your sense of not cutting corners on your residential builds. I’m a contractor and follow that same rule every day. I haven’t had a single complaint about a thing I saw on the addition build. You guys are all right. Great work, great problem solving. ✌️
Great job. The fact that you cut your own lumber is one of the coolest parts to me but i do love the diamond plate as well. Could add texture to the paint for anti slippage.
I always weld expanded metal on my ramps to aid in traction when loading, metal trailer and tracks its always butt clincher on my track loader the first couple times coming up the ramps and over the pivot point lol. Nice job
I am very impressed with the before/ after. You have excellent work ethics and you are very talented. The value of your work increased the value of the trailer increased many folds!!!!
I rebuilt a Multi-Quip Concrete mixer a few years ago and had to replace the main bearing for the barrel; I could not figure out how to get the bearing race out; found a YT video on doing the weld a bead technique that you're talking about; just about fell out after it cooled; couldn't believe how easy it was.
@@ebutuoyebutouy I used this technique for both inner and outer; neither would budge using heat and beat. The weld bead (and in fact I think I only did 4 shorter beads equally distributed around the race) "shrunk" the race when the bead cooled so it came out easy. These races were pretty large; the mixer had been run by the previous owner after the bearing had failed for quite a while; it was really screwed up in there.
@@ront8261 Ok. Confusion. There is an inner and an outer bearing. Each bearing has an inner race, and an outer race. Yup, good way to remove the outer race from the hub is to weld, both for inner and outer bearing. Yipee
What a great video Jesse! You have so much Knowledge on just about anything and it seems if you don't you teach your self. I am a old Man now 80 but when I was your age it meant a lot to learn things as you aged and teach your self how to do just about anything.
Yes another video. Great video. I personally think a timber deck is safer for friction coefficient, especially with track vehicles such as excavators and heavy plant. It will aid the load stability and reduce lateral slip causing an unstable load
I like the idea of the plates Dirt Perfect has between the tracks on his lowboy. They are going to stop any sideways sliding when it gets slippy. You can see them in the background @5.27 in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uxQ7u3n2174.html I have seen Chris Guin (Letsdig18) have big problems loading their dozer in the wet because the trailer was parked on a camber, and Jeff Anderson (JPayDirt) has also had some sketchy moments - and he is moving some big equipment!
I haul heavy equipment for a living my lowboy has a hydraulically driven steel dove tail with cleats and a wood deck both get dang slippery and dangerous in the rain, mud, snow and ice. However I feel that the track machines do end up digging into to the wood a bit better for traction but the boards end up getting chewed up fast needing replacement. be careful and go slow is by best advice except if you're sliding coming down on the ramp I've found its best to "gun it" before the machine slides sideways. Also i have better luck getting those mini excavators on with the arm headed to the front of the trailer and the push blade towards the rear. Happy to answer any questions or share my experience to help out and to find what works best for you. Thanks for the video trailer turned out real nice looking .
The trailer turned out awesome. I also fixed up a pintle hitch trailer mine is a 1977 Trail eze which was in worse shape than your was. Alot of work but it was my grandpa's. He passed away and I decided to fix it up to new and usable conditions. Great job!!!
Hello Jesse, that finished trailer looks the part, 👍👍 So glad you are very Safety Conscious when it comes to carrying plant, as you know the weight of the Dozer is something you don't want to play around with. That was a clever idea adding Gussets to the outer ribs, to transfer weight onto the central spine, and adding additional stiffers to the lower edges of the braces. Very well thought out all round, also the wires run in a conduit to protect them. The attention to detail really pleases me. Many a plant operator would be happy to own that trailer. By doing what you have done, makes it look really professional. I have seen some plant roll up on a site, looking like their gear has just been pulled out off a scrap yard. Bloody brilliant, Top Man Jesse, 👍👍🍺🍺. Best wishes, Geoff Lewis, Wales, UK, 🏴
Jesse That is a fantastic job .... FANTASTIC.. loaned my ol' trailer out 15 years ago "to a friend" and tried to go get it last week but he had let it wast away. so now I got some great ideas to make another one THANKX
Great Job and Buy for that 15 ton trailer , thanks for all the detail . Glad that wheel didn't come off on your trip back home . Someone really neglected that poor trailer , glad you got her all fixed back .
Talking about doing things right. I am agreed with you but, I kind of didn't enjoy seeing he is painting the metals without getting rid of the surface rust first.
Great video ,Jessie. Given the prior rust damage have you considered drilling drainage holes in the U cross members at the bottom of the trailer to let water drain? Awesome amount of hard work and knowledge went into this rebuild which otherwise would just be scrap iron ! 👍👍👍🤩🏆
Taking care of your equipment is not only smart to preserve your gear but it is a form of advertising as your in the public. It reflects on your attention to detail and aesthetics [important in your line of business for sure]. Well done.
Great video. By the way, I use white or yellow paint as much as possible underneath chassis, so that dark cracks, rust or defects show up clearly if they occur. It makes it brighter for underside work anyway. Another tip is to work on light coloured concrete etc whenever possible, to reflect up daylight.
Nice work. I like that you put the detail in for measuring the play on the spindles with the dial indicator. Good to know you pay attention to all the little details that really matter.
I'm just 24 minutes in this Video and i can already tell this trailer is going to be just like new.. You do good work and no shortcuts...Do it right or don't do it at all best way to tackle a project Wtg Bud Keep em comin Jesse...thumbs Up----------> Okay back to finish watching this Vid...
Jesse love the videos. Bur would highly recommend putting a wood deck back on. When loading steel track machinery on it in the winter or when wet will be bad. Never want to load on to a steel deck. Bad bad idea.
Those damn carpenters trying to be mechanics using a claw hammer to get races off. 😂 Love it 👍🏻. Great job Jesse, thanks for another cool video. You and Andrew make it happen. PS You might have seen my family in the past maybe, I’m originally from Hudson, family bizz Alvarez Modulars. Take care
Great video, you did an excellent job bringing your audience along with the improvements. We are surprised that the wheel bearings were not grease packed. More videos please, even if they may seem mundane. We never tire of them.
i enjoyed this video a lot from A to Z and if someones in the market for a heavy-duty trailer like you were your 20 thousand dollar price tag is right on I watch you and Andrew a lot just wish you could post a little more frequently good job thanks
Bud wheels smh. You forget what they were like once center pilot wheels made the scene. Or the old split rim Dayton wheels before tubeless tires came along. Looks like you found yourself a good trailer for the kinds of work you into. Great 👍 Content best of luck 🤞
44 mins; "Hey, I recognize that sawmill and shed" ! Your right, that yellow sucked! As far as installing wood (for traction and security), I'd just cut some planks of that Hemlock and install it between the traction bars, saving the rigidity, and the labor to remove them and run the planks lengthwise (replace a single piece when it rots !) Great video start to end Jesse !
really nice job, Jessie. You and your co-worker took a beat up 80's trailer (that had good bones) and with hard labor and rebuild skills, tuned that melted bearing piece of semi-junk into a large heavy duty trailer that should last a another decade of everyday use... easily! well done.
That’s an impressive job that you have done on your equipment trailer Jesse, not only that, but it’s also a multi use trailer as well as you can haul materials to job sites and basically do whatever you want with it !.
This is the key here. You can have all the big nest machines you want. But you need the trailers to move the stuff. And they need to be safe. And reliable. I know people who’s equipment failed on the road and got people killed. They were never mentally the same after This is serious work right here.
Nice work! Also super real how you shared how you wished you had stayed with the wood deck, and not switched it to metal. Hope it gives you years of service.
Since you have all four brake wires coming to that box, I think it would be a good idea to install a fuse on each line. Measure the current to the solenoids and select a fuse a bit higher than that. If one of them ever shorts to ground in the future that heavy gauge wire will ensure that it receives all the current the controller can deliver, disabling the rest of the brakes.
You always have to figure in your own time as a cost factor even when doing your own stuff Jesse 'cause nothing in life is free. The trailer looks great. 👍👍
thanks, I needed it for my dozer mainly, but the track loader will be fixed up soon too. I dont think my dump truck will haul that excavator with the dta360...thats what you have too right? I turned up the fuel and got alot more power but still 14 tons is alot of weight
@@eliteearthworksllc I got my eyes on a single axle international 8100 with dt466 and a 20k lift axle. its cab and chassis so I put my dump bed on, its got a 52k gvw! my truck now has a 2 speed rear with 5 speed trans, it helps alot
26:30 you should set the depth on your blade. Great work on that trailer, Jesse!! If I were an old, neglected piece of equipment, I would LOVE to be discovered by you! ha!
As i recall, he said on another video that he wanted the blade at full depth to get a steeper angle for the cutting blade teeth on the metal being cut; otherwise, a shallower cutting angle won't cut as well.
@@nickmastroianni5557 Also with the shoe set at full blade depth , when cutting steel , the blade helps you cut straighter because there is more blade in the cut , If the blade were set to 3/4" depth , there would only be about 4" of blade in the cut . At full depth , there's 8" to 9" of blade in the cut .
@Rob G not true. It done for the convenience of maintenence. When they get low on oil all you have to do is add oil. But when you have a oil seal go out you have to replace the brake shoes too because they get saturated with oil. With grease you have to tear everything apart to repack the bearings every so often for maintenence which is a pain. I have several semi trailers that I run. The ones that are constantly on the road I use oil because it's easier and on the one's that sit 6 month out of the year I use grease because trailers that sit have more tendencies to have leaking seals. Out of curiosity I checked bearing temperatures while loaded and after running around 100 miles on a hot day and the oil bearings were all around 140 degrees which isn't bad but the grease bearings were only 90 to 95 degrees. It's heat that kills oil and bearings. The only problem with grease is you need to keep a better eye on it because unlike oil you can't just check the level.
Slow and Steady win the race, good job! Yeah, these bigger rebuilds take some doing, but it's well worth it to buy something in bad shape and rebuild it so you know what you have, vs buying used that is 'supposedly' in good shape at full price. Thanks for the video!
Remember, this was a 15 ton rated trailer when new. All you needed to do was replace the wheel bearings and a new floor. So all this extra bracing and support you added pushed the ratings up another 3-4 tons. The trailer was built with 20-30% safety factors. The axles and bearings are now your weak areas and they have a 30% safety factor. This came from a trailer company where I bought my axles for a 16’ trailer I built in 1982. I have built 6 different trailers for my own use and I guarantee everyone of them were overloaded at so point, never had any problems. It’s a great looking trailer and everything I build is like you “OVERBUILT”. The area for chains would serve you better if you closed it in, like you said and put a lockable top on it. Enjoyed watching your videos, got a bunch of catching up to do. I’ve binge watching Andrew for the last 3 weeks and probably saw your butt on top of his castle several times. Take care stay safe.
That came out sweet ! Yeah steel on steel is super slippery be careful always be level or it will be off on its side trust me ! You can weld an angle iron on each side of the wood then it can't slide off left the right.. be a bumper rail
I am definitely going to weld on a piece of angle iron in the middle, I just didnt have the steel to do it at the moment. It was another trip to albany steel to get it, but I am about to build a grizzley screener so I will get the steel when I get the steel for that. good call
@@jmuller86 make a detailed video of the grizzly screener project lots of people look at those videos. Many of them on you tube. suggestion first do a video on what you plan on building before you build it, people watching can make suggestions on what your plans are, many of the suggestions might be benifical to your project. those that built them have ideas of how they would do things differently on a second build.
@@jmuller86 sometimes it's better to consult an engineer during a build like this . you can only have so much reinforcing here and there . you want to transport heavy equipment . the last thing you want , is for your trailer to BE that heavy equipment you're transporting . great job J . and thanks for furionese for the pizza , lol . some vloggers should have a pizza warning........." WARNING , ONE HOUR VIDEO OF BUILDING STUFF....PIZZA IS ADVISED "
Nice job on the trailer! You obviously understand how different modes of failure occur. I am a structural engineer, and would have reinforced the trailer in the same way as you have. (That is if I would be younger, now I just lean back in my lazy boy and watch you do it.) Cheers from Canada.
Jessie, I can see your workmanship and name on everything you craft. I am the same way. HD used to stand for something, but nowadays it's just a marketing ploy. "HD" "Ultra" "Max" "HQ" are just total lies. This new generation of throw away doesn't know what real durability means, or entails. Everything is produced with cheap materials, cheap, unskilled Slave labor, and then marked up for even more profit. This trailer is a prime example- go look for this exact setup online- it can't be purchased anywhere. IMO this is excellent. Your Son will be using this!
I agree with the all wood deck, especially since you have the wood and the ability to cut it. Hemlock should last a long time. Have you seen the rails that Dirt Perfect has to put in stake pockets on the center of his trailer to stop tracks from sliding sideways?
Wow, Steel on Steel, cleats will help but, there nothing like that good wood for it to bight into, and you can get all the wood you want on your jobs ?? You save lots of $$$$, nice job..See Ya
Nice friggin work..... I was going to say, its like a 20 k trailer... for 4 k, thats a nice trailer for what you need... BTW, always use a breaker bar for tough nuts, lol... not a ratchet. Now you have to put new guts in the ratchet... another project...
It looked like he broke the breaker bar first, and had to use the ratchet after that. Lol. I have the same Chinese 3/4" drive set. I broke the ratchet for my set, too; did it at work, so my union told the company they had to replace it, and they gave me a nice 3/4" drive Proto. That ratchet cost more than twice what the socket set did. 😂 The rest of the set has lasted okay, though, for the odd occasion when I needed bigger sockets. I mostly work on normal cars and trucks, not heavy stuff. 🤷
Awesome video, nice work! That looks great and secure 👌! Love the detail you go into. I like it black with the natural wood best also. Peace and good fortune and good health to you and your family.
Msgt D Oorah Today TRY REPORTING THIS or just COLABORATE YOU WHO WORK FOR THE OCCULT MEDIA : REV.14 ... REMINDER: The Sins of Your Fathers ... WHERE ARE THEY TAKING THE SLAVES. ALL BOARDER CAGED CHILDREN . SLAVES SOLD TO PEDOPHILES (that may be working next to you).... WHERE ARE THE CHILDREN GOING!!. Share this message please. They are covid positive and being release into your UNITED STATES FOR AMERICA ..."WAKE UP PEOPLE" . ✝G'D WRATH IS HERE HIS JUDGEMENT IS FINAL, WE THE FEW will Enforce His LAW. G'D SONG IS EVERYWHERE, "LISTEN" "✝ALL THE CHILDREN ARE NOT FOR SALE, NOR SLAVERY, NOR TRAFFICKING✝" We The Few are back were banned ... thank you JC KAY , some of my troops are like you .. We got your message. We expected this attack and were not taken by surprise. We continue with you and others .. Our love , our light, our strength and protection ALL for you JC KAY.. OORAH!! " ✝ALL CHILDREN ARE NOT FOR SALE; NOR SLAVERY; NOR SACRIFICE. ✝" " ✝💖THEY WILL NEVER BE ALONG. G'D SPEED PATRIOTS. WWG1WGA! " ""Freedom is not Free'''''. DOMINION OCCULT AI MACHINES are still in use around the world to control elections . The OCCULT CCP has control of all the DEMONrats and GOP TRAITORS. All you collaborators who support the Occult .. Prepare all you sinners, G'D Justice is upon you and OURS!!. FEAR is what make you weak, you know not what is coming for you! Righteous ones believe in yourself, We The Few. Are fighting Demonrats in the EVIL OCCULT DUMPS in DC underground. Do not believe the FAKE news . PROTECT your Children/your People. Be Calm. Pray for the Good Children of the Earth. We Believe in G'D and his WORD/LAW we all Follow, Warriors Will protect you all. We Believe and keep fighting for FREEDOM. JUSTICE. Justice is being served, believe. FREE WILL is your strength. Demonrats WAKE UP MAYBE NEVER see the light/truth, feel G'D love. Demonrats, See what your Horror and Hate have done to the innocents , THAT WE WITNESSED. Investigate this information and release it to the world , if you care to, and believe, ALL our lives matter. ✝UNITED STATES FOR AMERICA✝
1:05:00 I know this is 3 years old, but I'm planning to fabricate an equipment trailer from scratch and your video just so happened to pop up on my side panel. I was counting the lines going to your welder earlier in the video to figure out if you were using gas or not. These kinds of comments and captions in your videos are great. Keep up the great equipment repair/build content.
