C.A.V DPA Diesel Injection pump FULL Assembly 

Very good camera work thank you! That regulator portion has had me a little confused. I've been watching a lot of videos and yours helped clarify that part.

Thank you I have watched many videos to help me do repairs on my perkins 4.108 with cav pump you addressed. My questions I could not fully answer the ball and o ring with seal washer for timing advance proper assembly. very clear and easy to understand plus another half a dozen pointers that stood out thank you

Your video really helped me alot

Thanks. Great video

Nice moves

gracias, excelente

Nice work. You have the hook the wrong way round on the metering valve. I did the same on mine, but found out when I was editing the video.

Could you tell me the tension on the little plate with two bolts at 3:18? I made a gasket years ago and it worked OK, now still leaking after two tries with same gasket paper. Is the proper cork gasket part of the answer? Thumb up and saved for future reference. Cheers.

Hi there, great job on the channel! Have you disassembled any of these pumps with 4 pumping elements on the shaft of the main pump hydraulic head? I have seen videos with 2 elements disassembled but none with 4. I looking to know what way they go back together as there are 2 long ones and 2 short ones in mine. I haven't seen any disassembly videos on the timing advance features of these pumps so far play there! Thanks for any info received!

Hi, thanks for the clip! I did as you showed, I mounted the pump to the tractor (Ford 3610, year 1982), but the tractor does not move :( If I put some carburetor spray in the air filter, the tractor starts and everything is fine, that is, the pump works, but to start, the tractor fails to start. What did I do wrong?

Beste Jan, volgens mij heb ik dezelfde CAV pomp en ik heb het volgende probleem. Ik kan mijn motor niet meer stoppen omdat de stop niet meer functioneert, ook niet wanneer ik deze tot de eindaanslag op de brandstofpomp druk. Het toerental van de motor zakt dan wel. Tevens is het stationaire toerental van de motor van 800 rpm naar 1200-1300m rpm gegaan. Op het filmpje tijdens het samenbouwen zie ik hoe het werkt onder het deksel. Kan daar bij mij iets los geschoten zijn, of zit het dieper in de pomp?

Have a similar issue with a MF65 tractor with a Perkins A4.192 - 4 cylinder 3L diesel, won't pump to the injectors. Also one of the bolts snapped off in the end plate body, most annoying. I'll have to pull it down & rework it.

Hello I need help for my DPA CAV pump ! My tractor is very hard to start, it seems that there is low pressure at startup. What do you think about this problem ? Which parts should I change to recover start pressure ? Thanks

At 10.21 minutes to 10.27 minutes in the assemble, a ball, spring and piston are inserted beside the transfer pump. I don't have these items in my CAV injector pump, is this only required is some CAV pumps?

благодаря,много полезен материал..

Goede video Jan! Heb je pomp overgespoten of was die al in deze nette staat? Je video geeft me vertrouwen om binnenkort de cav dpa van mijn volvo penta (md7a) te reviseren. Thnx!

I got and old ford engine 3cyl with a lucas cav dpa pump, where i can get parts to rebuild the pump, change seals etc.. thanks!

Interesting

How would i get more deisel out of the lucas cav pump

I have lost the spring positions. I understand that a code on the plate gives the positions. How do I find the positions.

On the “auto timing” bolt you show a ball bearing going in it. I have a Ford 4000 cav pump and I did not see a ball bearing when I took the bolt out. It that required in all pumps?

Hallo! Thank you for a very informative video. If I need my injector pump checked out, it is the same one that you show in the video, is it possible for you to help me with that? I live in Sweden but have not find any one that can do it. How can I contact you? Andreas/Sweden

Jan d.oots you make it look so easy to put it together you are a very smart young man I always enjoy your videos ron rdzl om616 mb dzl

Can you give a part number and supplier for the broken "pin" that advances the cam ring. I need to remove mine to clean the pump and it is so tight I am thinking it is going break off. Great video - Thanks

I AM HAVING AN ISSUE WITH MY PROFF WANTING ME TO LEARN EVERY PORE AND HOLE IN THIS dammned pump. i have just a vague schematic

What is issue when there is no fuel to the injectors?? Injector pump is primed , lots of fuel at bleeders.

Cav pump prices

I want CAV diesel pump mf135 old

why the silly constant music noise ?

Pretty slappy repairing. Nice accent,though.