Тёмный

C5 Corvette Z06 KOOKS Headers & XPipe Exhaust Installed | SO MUCH LOUDER!!! 

Five12 Garage
Подписаться 7 тыс.
Просмотров 12 тыс.
50% 1

C5 Corvette Z06 KOOKS Headers & XPipe Installed | SO MUCH LOUDER!!!
In this episode we install a set of Kooks Headers and XPipe on a 2001 C5 Corvette Z06. The installation of the headers and xpipe on a C5 Corvette Z06 is straightforward and can be a accomplished within a few hours with simple hand tools. However, it helps to have a lift and a buddy as the headers are installed from under the car. This C5 Z06 gained more power and more volume from the exhaust after the installation of the headers and Xpipe.
Follow Jake: / @padriven
Get the Kooks headers: five12garage.c...
Get the Five12 Garage Hat: five12garage.c...
Email Me: scott@teamfive12.com
Buy Corvette Parts and Accessories: five12garage.com/
Camera Setup:
GoPro Hero 7 Black: amzn.to/36ZpmVA
Ulanzi Cold Shoe: amzn.to/37fWo4b
Ulanzi Housing: amzn.to/2rpXRWf
Movo VXR10 Mic: amzn.to/2tGna70
Sony A6400: amzn.to/2GIVzpa
Sigma 30mm Lens: amzn.to/37PUyre
Sarmonic Wireless Mic: amzn.to/2VblG05
Five12 Garage
====================
Follow on Instagram:
/ five12_garage
====================================
2017 C7 Corvette Grand Sport Heritage 3LT
Stage 2 Rear Winglets - GM
Stage 2 Front Splitter EOS (extremeonlinestore.com)
Stage 3 Winglets EOS (extremeonlinestore.com)
AWE Performance Xpipe
AWE Touring Axle Back - Diamond Black Tips!
Black lug nuts
Red Seat Belts - GM
ACS Composite Front XL Rock Guards
====================================
1999 C5 Corvette FRC (Fixed Roof Coupe)
LS1
Custom Lunati Cam
Blackwing Intake
Complete Street Performance Tune
Texas Speed Headers
Offroad X-pipe
Z06 Titanium Cat Back
RKT Performance Built T56 Transmission
Monster Level 2 Clutch
Corbeau Evolution X Seats
SpoilerKing 284GC Spoiler
Lloyds Floor Mats
#c8corvette #corvettez06 #c7corvetteawe

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 78   
@frontxxrunner
@frontxxrunner 3 года назад
Can never go wrong with a good set of headers. Better sound and better power. Win/win.
@Team512
@Team512 3 года назад
Totally agree!!!
@hungbeachbum
@hungbeachbum 3 месяца назад
Cook the starter...and can you say bitch to replace,,, got to take the entire underneath the car apart...thats a loose loose if you ask me.
@seanmcpike1503
@seanmcpike1503 3 года назад
The one thing I wanted to see yaa skipped over. The actual installation of the header.
@danshiu5436
@danshiu5436 3 года назад
I did the same set up on my c5 with billy boat bullets and wow what a difference!!! Great content like always
@Team512
@Team512 3 года назад
Thanks so much Dan! Pedal to the metal!
@YellowVette04
@YellowVette04 3 года назад
Oh yea baby. I'm glad you remembered to plug the cool packs back in 😉
@Team512
@Team512 3 года назад
Haha! I actually told Jake about that while we were putting things back together. Lol.
@greglehr744
@greglehr744 3 года назад
sounds great! making me want some headers on mine even more!!
@Team512
@Team512 3 года назад
Let’s do it!
@colemcmeans7809
@colemcmeans7809 3 года назад
oh im getting excited, idk what you did but my xpipe should be here friday. apparently wizard was an appropriate nick name. thanks man.
@Team512
@Team512 3 года назад
I got your back brotha!
@kishajameson1304
@kishajameson1304 3 года назад
He’s the bob ross of cars
@Team512
@Team512 3 года назад
I’ll take that as a compliment? He has better hair tho.
@MichaelRichterRealtor
@MichaelRichterRealtor 3 года назад
I knew something was going on the other day when I hear that...
@Team512
@Team512 3 года назад
I need more neighbors like you.
@SilvernFit
@SilvernFit 3 года назад
Another amazing mod!!!! Sounds Awesome!!!🔥🔥🔥 I need to get my order in for the headers soon. 👍🏼
@Team512
@Team512 3 года назад
Yeah buddy! 👊
@BuildNMotion
@BuildNMotion 3 года назад
Love the yellow vette, my favorite color!!
@Team512
@Team512 3 года назад
Yes!!! What’s your second favorite color?
@Team512
@Team512 3 года назад
"Wiggle and Jiggle" are indeed technical terms. LOL.
@HorsePowerObsessed
@HorsePowerObsessed 3 года назад
Sounds good! Loving Jake's Z06! 😍
@Team512
@Team512 3 года назад
Such an improvement! Those wheels 🔥🔥🔥
@padriven
@padriven 3 года назад
Thanks Man!! Means a lot! Definitely a fun car!
@Team512
@Team512 3 года назад
I like the sound of Jake's Z06 AFTER the headers were installed. What do you think?
@colemcmeans7809
@colemcmeans7809 3 года назад
love it
@Team512
@Team512 3 года назад
@@colemcmeans7809 You're next!
@colemcmeans7809
@colemcmeans7809 3 года назад
Meaning to ask you, can you get more parts than what is listed on the site?
@Team512
@Team512 3 года назад
@@colemcmeans7809 Yep. Absolutely. I have much more to get up on the site. Shoot me an email and let me know what you're looking for: scott@teamfive12.com
@swiftripper7557
@swiftripper7557 3 года назад
Wow. Those cold revs hurt lol
@haorlandini
@haorlandini 3 года назад
Another excellent video Scott!
@Team512
@Team512 3 года назад
Thanks brotha!
@sbd4de3
@sbd4de3 3 года назад
Nice video Scott! Would love to see this done to a C7 Z06!! :)
@Team512
@Team512 3 года назад
Thanks! Would you settle for a C7GS? Lol.
@sbd4de3
@sbd4de3 3 года назад
@@Team512 lol, absolutely! :D
@89imp03
@89imp03 3 года назад
Nice work as always 💯💯
@Team512
@Team512 3 года назад
Thanks man! I appreciate the kid words. Love your drawings.
@89imp03
@89imp03 3 года назад
@@Team512 thanks man 👍👍
@petercarey6883
@petercarey6883 3 года назад
Jake needs a "Jake" logo or two on his ZO6.😁 Great move Jake to go the header route. There goes your gas mileage due to you wanting to hear those wonderful notes exiting out the back.😉 Scott, is there a torgue setting for the nuts used to permanently mount the headers? Save the Wave👋
@Team512
@Team512 3 года назад
PC! How ya doing man!?! New exhaust is very bad for gas mileage indeed. Lol. Checkout the 6'17" mark in the vid. Look for the Hot Tip pop up. I cover the torque specs. GM recommends 18 ft lbs on the exhaust manifold bolts.
@petercarey6883
@petercarey6883 3 года назад
AHA! Thanks Scot. I was too busy listening and not watching. I get so angry 😠 when I can't walk and chew gum at the same time! Well done!👍
@robdomonkos
@robdomonkos 2 года назад
Just curious if you got a cel from lack of cats? If so what was the fix?
@jerrywilliams6820
@jerrywilliams6820 Год назад
LS all day baby sounds soooo good 💪💪🔥🔥
@vettepwr23
@vettepwr23 3 года назад
Nice video. I have a set Kooks 1-3/4 on my C5. I have a leak and it looks like it is where the headers connect to the mid pipe. How tight do those bolts need to be?
@Team512
@Team512 3 года назад
This can be a common issues if the header bolts were torqued before the couplers. Have you tried tightening the coupler bolts?
@keithwatson3893
@keithwatson3893 3 года назад
How much more horsepower is added with the new headers if any love the sound
@Team512
@Team512 3 года назад
Definitely adds a few ponies. A dyno tune is necessary to take full advantage.
@angelo_giachetti
@angelo_giachetti 3 года назад
Probly lost enuf tq on the bottom to notice. My C6 definitly lost tq with headers only.
@darioz5894
@darioz5894 3 года назад
So are Kooks headers the way to go ? I'm looking and only want USA made, best bang for the buck setup. Great video!
@Team512
@Team512 3 года назад
Thanks man! Kooks are fantastic. Great quality and perfect fitment.
@darioz5894
@darioz5894 3 года назад
@@Team512 I have a 2004 C5 Z06 and strongly considering Kooks, but need to look into long tube vs shorty headers and x pipe, because I don't know the difference. I want to keep my stock cats. Cheers
@joeanthonyreyna6742
@joeanthonyreyna6742 3 года назад
Yesterday I was going install my LG Pro series headers 1 of the 12 exh man was broken inside of the cylinder head. I attempted to drill it out went a little too deep and coolant came out. So my question , is the cylinder head ruined or once the broken bolt is extracted will a new bolt with a sealant of some sort seal it back up ? Thanks !
@Team512
@Team512 3 года назад
Unfortunately I think so...Time for new heads!
@joeanthonyreyna6742
@joeanthonyreyna6742 3 года назад
@@Team512 damn 🥲
@bngately5757
@bngately5757 3 года назад
What type of lift were you using to lift the C5 in the garage
@Team512
@Team512 3 года назад
MaxJax M6
@devonr7497
@devonr7497 2 года назад
Is this completely stock other than the Kooks headers and Xpipe? I am buying a C5 base model soon and it has kooks headers and x pipe with z06 ti axle back, will it sound like this? that cold start and idle was nuts, I got a cold start video of the car and it sounds MUCH quieter than yours
@MrHfdfireman
@MrHfdfireman 2 года назад
what do you charge to do that job?
@allgasnobrakesmotorsports399
@allgasnobrakesmotorsports399 3 года назад
What was the x pipe you used?
@Team512
@Team512 3 года назад
Factory Kooks
@AtomicZ06
@AtomicZ06 3 года назад
Niiiice!!
@Team512
@Team512 3 года назад
Haha! Thanks man! 🤘🔥🤘
@curt5253
@curt5253 3 года назад
how long was install
@Team512
@Team512 3 года назад
Filming makes every job take quite a bit longer than usual. So it’s hard to gauge what it would have taken without moving cameras and lights. I’d say 3-4 hours.
@JB-ej8zy
@JB-ej8zy 3 года назад
Just curious I just ordered these for my c5 zo6 and was wondering to you think it would be worth getting them ceramic coated ? I didn’t know if the additional heat under the hood would cause any long term issues as I’ve been told it will get hotter under there vs having the stock manifold.
@Team512
@Team512 3 года назад
I have about 10K on my car with headers and no issues. Some folks opt for adding hood vents to relieve excess heat.
@JB-ej8zy
@JB-ej8zy 3 года назад
Ok thanks for the info.
@imnickcampos
@imnickcampos Год назад
ooo, what wheels are those??
@NickKautz
@NickKautz 3 года назад
You skipped the most important and difficult part.
@jeremycronk4725
@jeremycronk4725 Год назад
so what did you do with the air injection piping?
@tryscience
@tryscience 3 года назад
How much for the Z06 x pipes with cats?
@Team512
@Team512 3 года назад
There are 2 versions of the catted Xpipe for the C5. Here ya go: five12garage.com/collections/c5-exhaust?_=pf&pf_v_vendor=Kooks%20Headers Feel free to email me with any questions: scott@teamfive12.com
@tryscience
@tryscience 3 года назад
@@Team512 No I mean for the used ZO6 x pipe. I can get brand new x pipes anywhere I just rather not throw away huge amount of money. It's good to recycle, right?
@Team512
@Team512 3 года назад
@@tryscience Gotcha! So the you're talking about the stock intermediate pipe that came off of the car? Shoot me an email: scott@teamfive12.com
@AmraphelofShinar
@AmraphelofShinar 3 года назад
How do you make your Corvette have that straight-out-of-the-trailer-park-look? Step one, black wheels. Step two, make it LOUD. I'm so glad my C5 is almost 100% stock.
@Guy117.
@Guy117. 2 года назад
Gay
@josephmoody8431
@josephmoody8431 Год назад
I bet you are real fun at parties.
@hungbeachbum
@hungbeachbum 3 месяца назад
God what a ugly exhaust to start.🤮🤢
Далее
5 Things a C5 Corvette Owner Should Never Do
7:50
Просмотров 213 тыс.
The BEST Longtube Headers For A C5 Corvette
17:49
Просмотров 9 тыс.
C5 Corvette Headers - Everything You Need to KNOW!
6:00
Quick Guide | C5 CORVETTE Headers Install
8:18
Просмотров 23 тыс.
C7 Corvette aFe Cold Air Intake | BOLT ON MORE POWER!
10:24
BUILDING A 500RWHP SLEEPER Z06 IN 10 MINUTES
10:25
Просмотров 95 тыс.