C6 Corvette Differential Fluid Change | The 05 C6 Corvette is Special for This Reason...

Подписаться 7 тыс.

Просмотров 17 тыс.

50% 1

C6 Corvette Differential Fluid Change | The 05 C6 Corvette is Special for This Reason...
In this episode, I change out the differential fluid on Drew's 2005 C6 Corvette Base Convertible. It's not a C6 Corvette Z06, but it is special for another reason.
AC Delco Differential Fluid: amzn.to/316YbXK
Get the Five12 Garage Hat: five12garage.com/collections/...
Email Me : teamfive12Garage@gmail.com
Buy Corvette Parts and Accessories: teamfive12.com/
My Camera Setup:
GoPro Hero 7 Black: amzn.to/36ZpmVA
Ulanzi Cold Shoe: amzn.to/37fWo4b
Ulanzi Housing: amzn.to/2rpXRWf
Movo VXR10 Mic: amzn.to/2tGna70
Sony A6400: amzn.to/2GIVzpa
Sigma 30mm Lens: amzn.to/37PUyre
Sarmonic Wireless Mic: amzn.to/2VblG05
Five12 Garage
====================
Follow me on Instagram:
/ five12_garage
====================================
2017 C7 Corvette Grand Sport Heritage 3LT
Stage 2 Rear Winglets - GM
Stage 2 Front Splitter EOS (extremeonlinestore.com)
Stage 3 Winglets EOS (extremeonlinestore.com)
AWE Performance Xpipe
AWE Touring Axle Back - Diamond Black Tips!
Black lug nuts
Red Seat Belts - GM
ACS Composite Front XL Rock Guards
====================================
1999 C5 Corvette FRC (Fixed Roof Coupe)
LS1
Custom Lunati Cam
Blackwing Intake
Complete Street Performance Tune
Texas Speed Headers
Offroad X-pipe
Z06 Titanium Cat Back
RKT Performance Built T56 Transmission
Monster Level 2 Clutch
Corbeau Evolution X Seats
SpoilerKing 284GC Spoiler
Lloyds Floor Mats
#c6corvetteexhaust #c6corvettezr1 #c6corvettez06

Авто/Мото

Опубликовано:

30 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@DrewDiskin 4 года назад

She runs like a dream, Scott! Silky smooth through the S-turns in our hilly neighborhood... Feels like new! Now I can attend our @Cars4Cause events with ease. Thank you! 🤟😎... This is definitely the #Corvette channel for me!

@Team512 4 года назад

Love it! Glad we could get your C6 running silky smooth.

@YellowVette04 4 года назад

I've had the gear oil sitting in my car for 2+ months... think it's time for me to stop being lazy lol. Good job as always. Drew should be good to keep ripping and we know he won't disappoint lol.

@Team512 4 года назад

Thanks man. Get after it!

@greglehr744 4 года назад

Great job explaining the troubleshooting to get the plug out!

@Team512 4 года назад

Thanks man! A seemingly simple job proves difficult sometimes.

@rafaeloliva8328 Год назад

I called the creativity. Thank you for the tip. Mine is an 06 so it’s a little different but it’s nice to know so you can share it with someone thank you and God bless.

@devendavidoff 2 года назад

Coil over install solves the problem of getting to the drain plug.

@DZRIDEZ 4 года назад

As always great job Scott and very informative. 👍

@Team512 4 года назад

Thanks D!

@timboehm8700 4 года назад

Great video, learning so much! Love this channel

@Team512 4 года назад

Thanks so much for the kinds words! And thanks for watching and commenting. I truly appreciate it!

@bluevette2230 4 года назад

Good day Scott; thank you for the informative vlog, take care and have a wonderful weekend.

@Team512 4 года назад

Thank you so much! You do the same.

@johnglynn7795 4 года назад

Hello Scott, not only creative with the Allen wrench, but informative as well. Best to your new channel. Blue skies, Jg

@Team512 4 года назад

Thank you!

@rogerw.92 2 года назад

Thank you!!!

@d-one-and-only 2 года назад

why didnt you add the additive when you replaced the oil ? On the manual there's mention of the oil and a LSD Additive...

@anasparekh3049 2 года назад

@Five12 garage, Hey Scott, hope your doing well. Saw this video and was wondering if you have sell any custom brackets or a kit to swap the 2005 c6 diffirential with a c5 z06 one. Looking to get my diff changed on my 05, worried about the case blowing up on me

@Rico_Suave-bk8le 3 года назад

Nice job man!!

@Team512 3 года назад

Thank you!

@cablelag Месяц назад

No slip lock additive? If you reverse and hear clunking. It's just the clutch packs. Change your diff oil. (these cars are gettin 20 years old, change all fluids) Also Once the differential fluid has been changed, the vehicle must be driven in 8-10 tight figure eight maneuvers to heat the fluid and allow the fluid to be worked into the clutch plates.

@hungq7234 7 месяцев назад

Hi, Why does 2005 C5 daylight driving marker light passenger side not working right. After driving for about 5 minutes, it will go off and stay off till the next day. Light bulb been replaced. Thanks, Hung

@craigclemans966 3 года назад

Cutting off a little off the other end of the Allen wrench would have worked better. You can use it again later, rather than have a stub. 😷👍

@Team512 3 года назад

Great point!

@roygordon4946 6 месяцев назад

is it true that on a rear diff fluid change on c6 do you have to run it in second gear for a min before you do the figure 8s

@hellomyfriend67 4 месяца назад

Is the location any different for the 2010? I've had two places tell me they have to remove that leaf spring???

@xavierruiz7725 3 года назад

I went to my local dealer and was told diff takes only 1.4 qts. Even printed a paper with my specs. I drive a c6 2005 manual z51

@Debkghtulvkfjkjfxjjcj 4 года назад

Great video! 2 quarts is all you’ll need though.

@Team512 4 года назад

Thanks! Yep. I like to keep one handy just in case. But you’re correct. It took about 1.9 quarts.

@user-or4tj3jt8i 27 дней назад

You transpose the dextron fluid part number when you say it. The last two numbers are 34 not 43.

@robertgossas3711 Год назад

If you dont want the hazzle to open the drain plug you use a oilchange pump and suck it through the fill hole. just make sure that the hose is at the bottom of the "pan". peace Corvette lovers :)

@colemcmeans7809 4 года назад

good video man, have you ever had a brake bleeder leak out of the hole its more of a weep but i dont like it.

@Team512 4 года назад

No I haven’t. But leaky holes are no bueno.

@colemcmeans7809 4 года назад

@@Team512 i need to get in there and have a look still. hopefully nothing is damaged.

@albertbalendran5513 4 года назад

Hi Scott gr8 video. I know Justin replaced his C7 tranx oil at 2K miles, do you recommend that also.

@Team512 4 года назад

It’s not a bad idea. Although I haven’t done mine because I’m busy doing everyone else’s. Lol

@albertbalendran5513 4 года назад

@@Team512 I hear you, start charging a small fee or ask them to buy your merch.

@Team512 4 года назад

I probably should start charging more. Good suggestion. I have too much fun working on these cars.

@Venom-ib5vs 4 года назад

Hey Scott so I’m basically down to making my final decision on the corbeau racing seats for my 04 C5. But I was just curious for the C5 did you need any harness or anything to prevent having any lights show on the dash due to the electronics in the original seats after installing the corbeau’s. Just curious and I hope that makes sense. Thanks

@Team512 4 года назад

I did not need any type of harness to prevent lights on the dash. I have a ‘99. I’m pretty sure this holds true for all C5’s.

@Venom-ib5vs 4 года назад

Awesome! That’s what I was hoping to hear! Next pay check I’ll be getting my corbeaus!!! Wooohoooo!

@Team512 4 года назад

@@Venom-ib5vs You'll love them! Great seats.

@petercarey6883 4 года назад

This question is directed specifically toward the drain plug, but let's ask it for both the drain and fill plugs? Would you ever use never-seize on them? While you were working on the "gorilla tightened" drain plug, I kept wondering, boy, what would I do if I stripped/rounded off the hex key indent?😱 Yeah, then it goes to, I guess I'm dropping the leaf spring to drill that sucker out.😢 I would NOT be a happy camper. But first I need a beer, or three.😉 Save the Wave🙋🏼‍♂️

@Team512 4 года назад

Good question PC. My approach is to properly torque the drain plugs so that anti-seize is not needed. But, the video would have been much more entertaining if I had to drill that plug out...

@petercarey6883 4 года назад

Entertaining?🤔 In your garage, absolutely!🤣 In my garage, more like a Royal PITA!😠

@89imp03 4 года назад

Of all the spots they could've put the drain plug lol that was what got approved

@Team512 4 года назад

Seriously! But I out smarted the GM engineers. 😂

@89imp03 4 года назад

@@Team512 😂😂😂

@S.G.37 9 месяцев назад

I just did this on my 06 C6 and it was a straight shot to the drain plug with my ratchet and allen head socket. They must have moved it. My issue was getting to the FILL PLUG! My exhaust was in the way, so the same trick of cutting the allen wrench to make a stubby worked like a charm!

@477racing 4 месяца назад

Little known fact: your girlfriend will benefit from you doing this job 7:25 😂

@panzerwaffen2873 3 года назад

So 2 quarters is what it takes

@HorsePowerObsessed 4 года назад

That's at least the 2nd differential fluid change that lift has seen... I can still smell it.... 🤮

@Team512 4 года назад

Ooh that smell! I actually think the fluid in the Z smelled worse for some reason.

@dennisz494 Год назад

I would never support the GM brand after owning a C6 corvette. The engineering on this car is pathetic! The split gas tanks needing to remove the transmission and exhaust just to change or fix a leaking fuel pump. Every little thing I do on this car is a quagmire and leads to having to remove and or replace ten other things. I had to remove the water pump and everything else in front of the engine just to get to the Camshaft sensor and needed to create my own puller to pul it out as it was stuck in there and took great force to remove it. It is ridiculous how pathetic the engineers at GM are. They are the kid in kindergatrten who was hellbent on trying to stick the square block in the round hole. I wish there was a site where we could tell all the different engineers as well as marketers who package everything to make it a big job to open a damn package. i would just love to inform them all of how much I can't stand them or their profession as they are complete idiots who just can't stop trying to reinvent the wheel because they are too stupid to be innovative and do anything right.