Cadillac DTS: No Start / No Crank

Подписаться 901 тыс.

Просмотров 333 тыс.

50% 1

In this video I have a look at a Cadillac DTS that was towed in from my used car guy. He picked it up at the auction as a no start. They replaced the starter and the battery but it still will not crank over. Let's see what it really needs. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Авто/Мото

Опубликовано:

7 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,3 тыс.

@richb.4374 3 года назад

This is the difference between a parts changer, and a real mechanic.

@tuccimane 3 года назад

My auto class teacher in high school taught us from day 1. Anyone can get paid to change parts, but learning why the parts need to get changed pays more.

@chrisramos1502 3 года назад

Facts bro 💯

@oldschooldude8370 3 года назад

The ability to read between the lines and understand diagrams saves you headache and sets you apart. Still fine tuning my diagnostic side 😂 I compete with another guy that's a little older & skilled than myself. I dont get to play as much as I'd like.

@Riqsuav1 3 года назад

Amen!

@rhyoliteaquacade 3 года назад

I would love to know the estimate from a Caddy dealer to fix that! No doubt they would have charged for a new ECU, then an entire harness.

@montestu5502 3 года назад

“Get the camera close in case there’s a mouse”. Hilarious!

@MrGommer101 3 года назад

the young guy is lucky to have a great teacher

@mattfarahsmillionmilelexus 3 года назад

The biggest and most famous Northstar problem was the head bolts pulling up out of the block and stripping the threads. It spawned a whole industry to repair the problem. But that was the first few years of production, '97-'99, and the 2000 semi-fix involving longer head bolts helped but did not fix them entirely. But in 2004, bigger head bolts with coarser threads were used, and no more problems after that - aside from the usual GM type issues that were far less serious. So the used car guy was probably on to something.

@AMSOfficial79 3 года назад

Who the hell downvotes these vids? Jealous competitors? This is as good of work as you will ever see.

@michaelblacktree 3 года назад

I'm guessing Scotty, and the mechanic(s) who worked on the car previously.

@jeffreygoss8109 3 года назад

And maybe the rodents that lost their condo

@jajupa78 3 года назад

Hell i wouldn't be mad at all. 500k views! 10,000 like! With that kind of traffic 45 people could have accidentally hit the dislike.)

@michaelbradley7529 3 года назад

Down votes are inevitable because you can't please everyone. I have yet to find a video on YT that didn't have at least some down votes.

@michaelbradley7529 3 года назад

@Edward Martinez You feel better now that you got that out?

@jeffberg8015 3 года назад

These are actually my favorite South Main videos, where you chase down damaged wiring or connectors. I watch and enjoy them all however, and have even learned a few things. Thanks for putting them out.

@2dfx 3 года назад

My 03 DeVille/DTS went to 255,000. They are comfortable, reliable cars provided you MAINTAIN them.

@jonathanosborne9889 3 года назад

You're all right Eric I love your comedy when you're working with the fellas in the shop God bless you sir and Mrs o

@NoWr2Run 3 года назад

YES, LMAO AT HIS LITTLE JOKES.

@kastooMcFry 3 года назад

How great is this: it is Sunday, got my breakfast sandwich and noticed Eric is here to edutain us!!?

@AZBEEMR 3 года назад

Could you continue eating your breakfast sandwich after the nun num nums?

@zx8401ztv 3 года назад

Nice new word "Edutain" :-D

@kastooMcFry 3 года назад

@@AZBEEMR Yeah, that doesn't bother me, as long it wasn't present on my sandwich.

@jussikuusela7345 3 года назад

@@zx8401ztv these videos are also great entercation

@atikovi1 3 года назад

By 2006 Cadillac got the problems with the Northstar pretty well taken care of. Had a 2010 with 200,000 miles and saw limo companies that ran them over 300K regularly.

@petteraustheim5713 Месяц назад

The way you eliminate the issue is awesome👌🏼

@danieldelpha1315 3 года назад

Can't believe someone replaced the starter without jumping the relay

@simonparkinson1053 3 года назад

I was half expecting a loose bolt securing one of the large connectors to the underside of the underhood fuse/relay box!

@InquisitiveSearcher 3 года назад

I'll be a little bit more charitable in my thinking and say that maybe they did try jumping the relay and found that the starter was bad. They replaced it and then the engine would turn over but not start. At which point they gave up.

@fulloppositelock6778 3 года назад

@Timothy Salomon Identiguess.

@codywichman213 3 года назад

seriously

@emeyer6963 3 года назад

If they keep throwing parts at it eventually they will find the problem.

@DJSYKOBass 3 года назад

Can’t believe they didn’t fire a “main board” at it with the parts cannon while they were at it and noticed the mess of wires resulting from a rodent sabotage haha

@killer2600 3 года назад

Cuse them mainboards are expensive and gotta be programmed. Way above the low dollar mechanics pay grade and student loan costs.

@tylerkrug7719 3 года назад

Right? Lol They sure do like to go to that option pretty quick usually

@skurblord3401 3 года назад

I've always wondered why people jump to the computer being bad so quick. Often times its the most reliable part in the car.

@skurblord3401 3 года назад

@Timothy Salomon Fair enough. Still seems like a backwards thought process though.

@xesior 3 года назад

A basic scan tool would have send them in that direction. So its safe to assume they didn't try that. Therefor only were able to conclude that when the key turns the starter doesn't work. They also didn't notice the fuel pump didn't activate. If they did they wouldn't have tried to fix it with a starter. Its actually quite logical why they did what they did. From a 'limited information' and 'basic understanding of a car' point of view. At the very least they attempted to fix the problem themselves, which unfortunately didn't work. Can't fault people for trying. I mean if it so happened to be the starter... they would have fixed it. Not trying would have resulted in no results either. No guts, no glory :)

@zexelM 3 года назад

Those turds are big because it’s a big engine, if it was 1.8 or similar, the turds would be a lot smaller.

@flagmichael 3 года назад

Sometimes they are the wrong size, and have to be returned for the proper size. The shipping delays are what makes the job take so long. "Ma'am, the turds were the wrong size from the supplier. We apologize for the regrettable delay in getting the proper size turds for your Cadillac." Customer satisfaction with rat turds is of paramount importance to our company.

@rogerw9840 3 года назад

Well, yeah. You are what you eat. :D

@davemcgaffney9401 3 года назад

We are talking about the rodent and not the Northstar Cadillac. Both are turds though😄

@jpeterman9699 3 года назад

Do turbos affect the size of the turds

@hatfez 3 года назад

Here in New England, in my 120 year old house, I "trapped" over 35 mice so far In 2 weeks. Another 50 or so & my wife will finally get that fur coat she's been asking for. I hope that the peanut butter holds out.

@douglasthrelfall5318 3 года назад

I have an ‘04 DTS, Northstar or nothing! They can be “challenging” to say the least. Oil leaks, water pump, power steering pump, hoses (all) radiator, broken wires, window regulator(s), etc. 210K & still going strong...

@classicrestoration 3 года назад

Nice shooting Sherlock Ohms😉 Both my Dodge Cummins trucks had this problem....damn ground squirrels. Air boxes were so full of mesquite seeds and insulator pad fibers, it maxed out the air filter minder! Mileage went in the tank as well. Repaired the damage, replaced the pads and pop-riveted hardware screen cloth across the air intake openings. So far, so good.

@markh.6687 3 года назад

Sherlock Ohms. :) And he says "It's elementary, my dear WATTson!"

@classicrestoration 3 года назад

Mark H. Well played Sir👍🏻

@michaelthompson7570 3 года назад

love these short quick hitters with a happy ending

@johnwilkins6871 3 года назад

The northstar is a great engine. There are test kits available if you want to buy an early model car but by the time this DTS was made the head bolt issue was fixed. I had one and it never gave me any issues.

@bassb450 Год назад

In the second half of the 2004 model year the the head bolt issue was fixed for good by GM.

@thomasherring6640 3 года назад

Love it when I get an education on car repair, and comedy all at the same time!

@upnorth5465 3 года назад

I wish I could post a picture of my Impala after a red squirrel had a field day with the underhood when I was gone on vacation for a week. Unbelievable. He his mother, brother, sister and non relatives are now deceased 👍

@watsisbuttndo829 3 года назад

A bush rat recently knocked a glass jar off a self onto my recently repainted 65 gto. His family tree goes no furthur.

@Sjackson2369 3 года назад

Seen the damage after a raccoon demolished a Dodge Caliber. Needed pretty much everything on top of the motor. Coils, wire harness, fuel line, insulators. Never found the raccoon though.

@99andrianmonk 3 года назад

We got "red alert" and "turd analysis" all in one video. Who could ask for more..... Well, Mrs. O giving you some grief would just have been icing on the cake. Seriously, thanks for bringing us along. Following you through your diagnostic routine is always a learning experience. Looks like you could make a whole series on auction car "buys". Keep them coming.

@SoopieMadrox 3 года назад

Great straight forward diag Eric and Jason. It always amazes me how many people would rather throw parts at something rather than have it properly diagnosed. A simple jumper wire on the starter circuit could have saved a lot of unnecessary labour, as you demonstrated. Keep up the good work!

@trefunk3743 3 года назад

06 DTS 360k on it, love it have only had the usual maintenance done by myself, I did do a refresh on the seals @ 250 which does involve dropping the full front crossmember to get er out, past that, and maybe having to remove bumper bolts to change your headlights lol it is a great car especially in winter it weighs so much haha Smokes a new turbo MDX, just don't expect to get anywhere reasonable fuel mileage until you're on the highway But you gotta love all the comforts, even air bagged from factory and a trunk you can fit 4 dead bodies in

@ColoradoMoe 3 года назад

You have taught me the difference between a mechanic and a parts changer. Though I would never claim to be anything more then some guy with a handfull of tools, I can say for certain that I am not a parts changer! For that I thank you!

@SmittySmithsonite 3 года назад

I would say Eric is a Technician - the rest are mechanics. :)

@sharedknowledge6640 3 года назад

Kudos to the GM software guys for building in diagnostic codes that pointed directly at the main problems. Toyota could take some lessons there. And a face palm for whatever idiots worked on this before and ignored such obvious codes. Great video!

@tiredagain6722 3 года назад

I love auction car videos! Makes me wonder how much money people lost by sending the car to the block instead of getting it fixed (by someone who has a clue)

@knurlgnar24 3 года назад

Mechanics are expensive, Northstars are difficult to work on, and the trade-in value of a car like this is only $1500. Despite it being a dang nice car I understand why it ended up at an auction.

@majorpayne5289 3 года назад

👍Bought a 99 Cadillac STS w/ 70k NorthStar. Super nice 1 owner. Kept for a year, enjoyed it as the thing was nice & pretty quick down the road. Got semi educated on the NorthStar thru RU-vid over a couple days then Sold it BEFORE any issues started happening. Paid 6k. Sold it for $6600. I wanted to love it & keep it but I've been dumped before & it hurts😂 NorthStar...such a disaster all due to fine thread machined head bolts....among other things!

@DependableAutoTruck 3 года назад

in the south when you buy a used motor many times they cut the harness and leave on motor i cut them apart and save wire so when repairing wiring most of the time can find same color or real close but i don't do the volume of work you do so i have more time to do stuff like that. thanks for what you do has helped me so much doing diag. had to do ball joints on 4wd dodge from up north got a taste of your problems. upper control arm bolts rusted to inner metal part of bushing had to cut both sides of the bolts to get out would go crazy if i had to do every time didn't know how to charge and be fair but he was happy so life goes on. keep sending us videos thanks. i am in southeast alabama

@mph5896 3 года назад

I beat on a wheel hub for 3 hours the other day due to rust. Aluminum/steel fused together. 30 minute job turned into 3-4 hours.

@ncfatcyclist 3 года назад

"Rust and Rodents" a new country music song.

@steveo6631 3 года назад

Exact reaction I had when I looked under my truck fuse box... I think he left 3 or 4 wires unchewed.... LOL... Thanks, SMA...

@joecnc3341 Год назад

Great deductive reasoning! True Technician/Mechanic right there.

@debbjer1 3 года назад

"This is better than an unboxing video" Priceless!

@fjr2go 3 года назад

You always make it look so easy :) In fact so easy that I started doing my own simple maintenance things. Great find on the wiring!

@wendwllhickey6426 Год назад

Chip monks ate the wires ,cause hi had same problems with fuel injection wires

@baxrok2. 3 года назад

Awesome! Nice fix guys. Thanks Dr. O!

@pantherplatform 3 года назад

Excellent auction car. Never leaves the auction block.

@scwyldspirit 3 года назад

You have taught me more about vehicle wiring than what they taught me when I went to school for it in the military.

@8power0 3 года назад

THAT'S JUST HOW I LIKE IT, COULD WE HAVE SOME MORE DIAGNOSTIC VIDEOS PLEASE THAT WAS A GOOD ONE AND THANKS FOR YOUR TIME !!!!!!!!!!!!!!!!!

@crazyleb1077 3 года назад

Great Sunday Morning

@JasonSpiffy 3 года назад

No matter how many times I watch your vids I feel like Im learning a lot. When it comes to applying this knowledge to my own stuff I freeze up. Great vid!

@chuckoschmcc5853 3 года назад

Great video! Thanks for taking the time to show us how a pro finds a no-start problem. You're a natural with the camera.

@denos.2688 3 года назад

I love how u narrate your videos. Glad your back on. 😬

@michaelgiannone2192 3 года назад

Awesome. I love your videos. You’re very talented.

@billkaczynski7709 3 года назад

Eric you’re diagnostic skills are second to none! Great video I love the way you cut out the fluff and get down to business. Thanks!

@NoName-zn1sb 3 года назад

your

@paulkirkland1535 3 года назад

Eric,gr8 diagnosis without firing the PARTS CANON! I'm definitely loving this especially when it comes to dealing with electrical/electronic issues. Seen my share of rodent damage to automotive wiring like you'd never believe. It mostly happens during winter I find when these critters crawl in under the hood when the car is warm and chew away at wiring to their hearts content. Yup they certainly can make a mess of things.

@klwthe3rd 3 года назад

Finally a Cadillac on the channel! Yay!

@allenleavell2847 3 года назад

I'm honestly surprised he hasn't had a lot more

@Friend_of_the_One-Eyed_Ladies 3 года назад

That was textbook! Great video, and well explained. I bought a Caravan a couple years back, a very shoddily rebuilt vehicle that had been hit hard right where the fuse box, PCM, and body harnesses meet. Shredded probably half the wires. How many wires is that? There are 192 pins on the PCM alone. I knew the wiring was junk when I bought it, but I love electrical stuff. Spent a week going over the wires with a powerful light and dental mirror, looking for nicks or damage, and repairing everything. Over 100 nice neat solder splices, going around each splice with a smooth-jaw pliers after soldering to make sure there weren't any pointy bits sticking out, then double-wall heat shrink tubing. I also loved that you actually soldered the wires like you need to do for a reliable fix. Too many guys use crimps or even wire nuts (aka Marette connectors). Or just twist the wires together and electrical tape them, like these chumps did with the airbag wires in my Caravan. One thing I would recommend that I didn't see you use is double-wall heat shrink tubing, which has a lining of hot-melt glue. Otherwise moisture will get in to the copper wires and cause corrosion which WILL eat completely through the wire in 5 years or less.

@aswasw9409 3 года назад

He always uses adhisive lined heat shrink

@amefournier5720 2 года назад

I am so grateful to have come across this video. I have been struggling with my 2004 Cadilac Deville DTS with various issues and this video has been the most explanatory yet! Thankyou so much. I cant afford to keep being ripped off at the mechanic shop because I'm a woman so I'm going put your knowledge to use!

@robbflynn4325 3 года назад

Love the way you guys properly investigate stuff. Go to a dealer, and as well as charging a fortune they will often guess at the problem as they did with my wife's Volvo, in the end I took it to a backstreet garage and the young man properly investigated and remedied the actual problem.

@JF-jm3nb 3 года назад

Cady TOILET you have made my day🤣🤣🤣

@65bugnut 3 года назад

Nice find, I think you can add Scatologist to your skill set.

@tom535 3 года назад

Another one saved from the junk yard for the minute.. great video thanks for your time..

@danielgeng2306 3 года назад

Said it before, I went Lincoln Tech in ‘82 and I’ve learned more from you , thanks !

@CRAZY_VIDS07 3 года назад

I wish I had time in my shop to do videos...always busy dont have that kind of time..but its awesome some of you have the time to teach a little out there to help others.

@scientist100 3 года назад

Probably busy firing the parts cannon. There is a reason some people don't do videos.

@jefferyepstein9210 3 года назад

@johnny smit Could be that he is an employee that has a manager who runs him to death and would consider a video a waste of time. There is a reason why this is one of the only channels that shows the level of diagnostics it takes to find problems. Even SMA doesn’t show all the cars he works on. Why? Because it takes a lot of time.

@CRAZY_VIDS07 3 года назад

Wow all these haters lol..must be top fans.

@nmatthew7469 3 года назад

@@jefferyepstein9210 I have to give credit to anybody that has time to film themselves and edit it to post on yt. I've learned just about everything i know by watching these. Forget the haters Eduardo.

@CRAZY_VIDS07 3 года назад

Lol gotta luv them haters if they work the same way they comment (guessing) i feel sorry for the results 😅

@kennethconnors5316 3 года назад

AHHHHH "NORTHSTAR" ultimate GM

@donquijote6030 3 года назад

"We're gonna have to analyze those turds..." I really needed a good laugh. Thanks for the great videos...and commentary.

@hittz8331 2 года назад

This dude does NOT play games! He knows what he is doing. And has a fun personality. Thanks for the demonstration South Main Auto Repair.

@spursmaniac5060 3 года назад

Esp. love the Caddy ad while Eric is working on the POS Northstar!!😃

@alannash5696 3 года назад

Another “parts cannon” approach disproved.

@rod928s4 3 года назад

Always love seeing "smear-o-matic" wiper blades!!

@microguard 3 года назад

Few bucks? He used a +US900 scanner. Skill and logic are invaluable...great work 👏 👍

@crisprtalk6963 3 года назад

Love me a no start no crank!!

@OrlandoDrivers 3 года назад

GM wires must be tasty.

@preethamkumardh1115 3 года назад

Same problem here in India for most of the cars.. Mechanics here say that's cos the wire taste sweet 😂😂

@ischmidt 3 года назад

Carmakers all changed to soy-based plastic for the wiring and rodents think it's the tastiest thing ever. It's not just GM.

@dot7107 3 года назад

@@ischmidt same with volkswagen ag

@flagmichael 3 года назад

Everybody's wires are. Mice climb up the tires and get into engine compartments and air intakes, and then the party starts. When I worked in IT Field Services for a large electric utility we had a lot of trouble with pack rats at mountaintop sites; they not only chewed wires, they chewed coolant hoses. Sometimes half the hose would be gouges. Then we would call the company who maintained the APUs and called our "rat patrol" department. They found the entries, stuffed steel wool in them, and filled them with urethane foam.

@lawrencewheeler8868 3 года назад

Mercedes also!!

@TheMysteryMan704 3 года назад

Your videos are helping me find a reputable mechanic. If it wasn't for the fact that I live over 3 hours from you, I would take my cars to you! You also show how long a job SHOULD take, making sure we don't get overcharged on the labor end.

@MRrwmac 3 года назад

Nice work, great troubleshooting and solder job! Thanks for the unboxing.

@mph5896 3 года назад

Wont start boss. Sir, get the PARTS CANNON!

@flagmichael 3 года назад

Those 155s ($1,550) really pack a wallet - uh, wallop!

@buffsheeri 3 года назад

sir it seems we are firing blanks

@markh.6687 3 года назад

@@buffsheeri "Sir, Parts Cannons ineffectual. I suggest we try the Money Torpedoes."

@dwaynechaulk7387 3 года назад

Call in the dorman canon, it's the best lol

@mph5896 3 года назад

@@dwaynechaulk7387 Or the poop shooting cannon. Same thing.

@AntonioClaudioMichael 3 года назад

Simple solder repair on some eaten wires good work Eric O @SouthMainAutoRepairLLC

@spaceinvadertoo 3 года назад

New Sunday morning videos with Eric O and Mustie1. Life is good. Thanks.

@brianpooley6635 3 года назад

Scottie talks about the problems but you show us the problem plus the repair. Those scan tools are something else and it must be great to know how to use them. Thanks for a pleasurable journey.

@frankgonzalez24 3 года назад

As someone who worked at a Cadillac dealer, I can say those Northstar engines are $$$ makers. Especially when it comes to them overheating due to the head gaskets.

@thomasfletcher4765 3 года назад

Use to own a 97 . 180,000 and never had an issue with the head gaskets , heater core fell apart ( friggin plastic tanks ) , alternator fried twice , battery died twice ( replaced both times ) but that car ran like a banshee

@_cadillacmiketyping...2533 3 года назад

@@thomasfletcher4765 same here! I love it ,crossing 228k miles! 1996 Deville base

@djosbun 3 года назад

The GM engineers set a goal while drunk to beat Subaru at the bad head gasket count.

@lvsqcsl 3 года назад

Those Northstar engine were so good that GM switched Cadillac to Chevrolet engines and rear-wheel-drive in their cars.

@americanbreed5116 3 года назад

146,000 on my 06 DTS ,still runs strong as it ever did ,with no major issues..

@jameswoods7276 3 года назад

New Mustie1 video and a new SMA video on a Sunday morning ... Life is back to normal now 😀. Amazing how all the other shops in your area seemingly don't have basic wiring and diagnostic skills.

@michelswerissen6544 3 года назад

Awesome repair well done, a real mechanic.

@Jacob-sh4ym 2 года назад

Methodical and thorough, true professionals!!!

@klaw163 3 года назад

Sad they probably crammed some junk aftermarket starter in there when the original was still good! Hours of incorrect work done and it was correctly diagnosed in minutes 😂

@doncaranci2547 3 года назад

Just had a flashback from when I was a young man.(18) I was hard on my Moms car. A 1966 Chevy 6 cylinder. I fried the clutch so I had to get it fixed. Brought it to a friends shop. They put new clutch, throw-out bearing etc etc. When it was all done I got in and was backing out of the garage. I did not realize the door was open as far as it was. Needless to say I snapped the hinges in half.. (pot metal) Long story short got the door back on and locked it. Forgot to tell my Mom about it. When she went to open the door, it fell to the ground..lol Boom. Just wondering if you have ever had this happen? Thanks for the walk down memory lane..51 years ago

@markh.6687 3 года назад

OUCH! OOH! I HATE WHEN THAT HAPPENS!

@SmittySmithsonite 3 года назад

HAHAHA! Great story!

@johnschuler3269 3 года назад

Another great use of common sense, logic ... documentation for location & wiring, etc. AND ... Good Job on the videos. AND You keep it interesting, educational and fun.

@Paul1958R 3 года назад

Eric, Great video, diag, and fix - thank you! While watching this there was an ad for Cadillac and I had to chuckle a little. SMA#1 God bless Paul (in MA)

@jamesblackwell8121 3 года назад

seeing Northstar would make me run!

@michaelmcgregor3108 3 года назад

They did, right to south main!

@biggerbill82 3 года назад

Northstar after 06 model year is not to bad. They fixed the head gasket issues by then.

@Ignaz366 3 года назад

@@biggerbill82 Agreed, its is a great engine IMO. The N* is not the only engine that had head bolts pull out of the aluminum block. Just look at all the head bolt repair kits out there.

@twopumpsandimdone309 3 года назад

Ah I had one from 96 and 08. They aren't that bad..

@neilmurphy845 3 года назад

Ya the second I saw that I thought blown engine

@mauricefyke1393 3 года назад

Calling the Caddy a "toilet" almost made me spit my coffee out.

@_cadillacmiketyping...2533 3 года назад

Lmao thats okay me too but the thing about toilets are, everybody needs one 😂

@animalcorvair 3 года назад

@Doogie Rush i have a caddy my boy has a caddy..both have northstars no problems

@ferrumignis 3 года назад

It's a bit harsh on toilets tbh.

@lvsqcsl 3 года назад

My mother owned one of these toilets.....it was one thing after another. Those Northstar engines are notorious for problems.....Not only that, they didn't use this engine much else. (Oldsmobile Aurora maybe?)

@bleachinuri 3 года назад

@@animalcorvair your lying then, these Cadillac's are complete garbage, i used to work at a Cadillac dealer, even c tech's were doing 85 to 90k a year, always broken, north star should have been called the shit star

@randygutierrez4965 3 года назад

Always a great Sunday when SMA post. Best mechanic.

@KingOfKYA 3 года назад

I chased down a bad "o2 sensor" on one of these, after and ecu swap it was fixed. Your channel is part of the reason i was able to chase the wire all the way to the ecu that had a dead o2 sensor channel:) voltage on wire was solid, while ecu reading was jumping all over , rather that shotgunning an O2 sensor like the mechanic that "fixed" it before me. The real fun is getting that car to pass one of the emissions tests involving deceleration for 60mph.( It nearly idles at 58-65mph.)

@thomasfletcher4765 3 года назад

Top o' the mornin' to everyone !

@RussellBooth1977 3 года назад

I'd say a rat chewed on the wiring,as far as the 4.6 litre Chevrolet Northstar V8 engine goes, they're good once the cylinder head bolt thread problem is fixed, they blew gaskets because the thread pitch was too fine & the threads were aluminium so the bolts eventually would pull out then strip.out the threads,they used M11 × 1.5mm bolts. The fix was to fit thread inserts into the engine block to repair the threads, replace the cylinder head bolts & gaskets. I know in my 5.7 litre Chevrolet LS1 V8 engine they were like an M11 × 2mm thread size so it was never a problem in them , Cadillac eventually did that with the Northstar V8 engine to fix the problem,they used M11 × 2mm cylinder head bolts in them instead. They put out 224 kilowatts & they were dumped from their lineup in 2011 leaving a choice between the 210 kilowatt 3.6 litre V6 & the 270 kilowatt 6 litre Chevrolet L76 V8 engine as an option !

@markh.6687 3 года назад

Not as powerful as my 1.2 Gigawatt DeLorean, Marty! :)

@tylerkrug7719 3 года назад

You are a friggin wizard man! Doing what others have failed before you. The master!

@bertgrau9246 3 года назад

Tyler, You're correct, the only thing I don't understand is, why don't they go to South Main Auto first? Why let someone else throw parts at it, then take to the guy that can actually fix it?

@AaronAndrewtargetedindividual 4 месяца назад

Great job!! This is the first time out of every video I watched on RU-vid where I have seen a professional mechanic.

@BorkToThe3rd 3 года назад

I'm always shocked that any professional repair place will still do this. It is pretty easy: test, Test, TEST!

@killer2600 3 года назад

You have to be good with electrical and there are just so many mechanics that don't understand what they can't see and will tend to stick with tried and true methods they know (i.e. change the typical parts).

@rimmersbryggeri 3 года назад

@@killer2600 Yep thats true, Some of the older guys don't even think it's possible to understand computers and electricity with out at least a masters degree in engineerting.

@davidlong1786 3 года назад

"Professional" is the key word. They weren't.

@rimmersbryggeri 3 года назад

@@davidlong1786 proffessional only means you are getting payed. Amateur means that you do it for love. So I guess a proffessional amatuer would be the best balance?

@FishFind3000 3 года назад

Sometimes it’s easy enough just to actually look at it for a few minutes.

@hahaha12345678993 3 года назад

eric o, i think you should do some kind of offering to your mouse population once a year because of all the customers they bring for you

@Misha-dr9rh 3 года назад

He should buy one of those huge ass wheels of cheese, put some birthday candles on it and leave it in the shop overnight to appease the rat gods.

@markjordan4994 3 года назад

You make it look so easy. Not so for us DIYers, but great to watch and learn it bit.

@floofycatz 3 года назад

Excellent job!! I felt your satisfaction when it started up :) I have an '02 Seville base and love it. But I know it's a hog to work on, so kudos to your perserverance and professionalism.

@stevenmurata4392 3 года назад

The water pump takes a "bit" of disassembly, lol. I didn't buy the car, inherited it (2 of them, lol).

@neilmurphy845 3 года назад

There the best type of cars when you think you'll only need 1k into it and then find out that you actually need more

@ceezer6262 3 года назад

That engine is a boat anchor. No bueno. The starter is in a great spot. Wonder what the engineers were drinking when they designed that engine.

@tjlovesrachel 3 года назад

@@ceezer6262 dealer service everything

@4mula353 3 года назад

Northstar. For those that like gambling and time bombs

@flagmichael 3 года назад

"C'mon, Jake! Set the timer and let's take it on the lam!" "But boss, I forgot how long I set it for. You know I don't get no idears." (Bugs Bunny fans will understand.) "Ah, never mind. Jump in the Toyota and we will get away scot free."

@lvsqcsl 3 года назад

It is got to be one of the WORST engines in a Cadillac. Oh wait! The 4.1 liter all aluminum engine was worse....No! The V8-6-4 was.....Great video!

@klwthe3rd 3 года назад

By this year, they weren't having issues any longer.

@johnwilkins6871 3 года назад

The northstar is a great engine if maintained properly. Head bolt issues were fixed in 06. I had a 97 deville that I bought with 130k and put another 30k on it before selling. Didn’t have one issue and all I did to it were coolant changes, brakes, tires, and oil changes. People who say these engines suck are people who buy these without testing them first.

@lvsqcsl 3 года назад

@@johnwilkins6871 The car I am talking about was a new car.

@jamesharkness1058 3 года назад

Wow! Great job finding the problem.

@Stephen-zd5cq 3 года назад

I have a Cadillac DTS 2006, 201,000 miles. Had for abit over two years no huge issues so far.

@Blue89bird2 3 года назад

I don’t know if nasa analyzes 💩 😂

@markh.6687 3 года назад

Actually, they did analyze astronaut feces for chemistry changes from weightlessness.

@fumthings 3 года назад

maybe he means National Geographic...

@AntonioClaudioMichael 3 года назад

Starters are a pain on these vehicles @SouthMainAutoRepairLLC

@flagmichael 3 года назад

That really makes me wonder why the previous guy went that route rather than doing the test that took Eric O. a minute or so to run.

@AntonioClaudioMichael 3 года назад

@@flagmichael right

@AntonioClaudioMichael 3 года назад

@Brian Kelly agree 100 percent

@briansigma1342 11 месяцев назад

I learn soo much from this man. He and his wife are awesome people!

@dpyles9396 3 года назад

another fine training video from your friends at the South Main Auto Group!! Thanks Eric O

@mdotguy 3 года назад

What's up early crew

@fcm9867 3 года назад

I’m going to churches today and I’m looking for little old ladies with Cadillacs. 😃

@markh.6687 3 года назад

Frank, we really don't need to know about your fetishes; we have enough of our own. :)

@mailmanjoe 3 года назад

Those cars are like the early 90's Ford Taurus. You go up to the people you see driving them on the road these days and congratulate them for keeping it on the road. It's truly an accomplishment. 😂

@rguy2684 3 года назад

I had the same problem with my 04 gmc dually with the dmax. What a mess, 3 hours later and it was running. Then my granddaughter put a penny in the cigar lighter outlet.🔥😱. Didn’t blow the 20 amp fuse, just melted some wire before I could pull the fuse. She is a great helper!