Тёмный

Camlocks (Locking Screws) Explained | How Cam Locks Work on Flat Pack Furniture 

HanDIYman 007
Подписаться 28 тыс.
Просмотров 196 тыс.
50% 1

Cam or Locking Screws Explained | How Cam Locks Work on Flat Pack Furniture
✅ Join this channel to get access to exclusive rewards & perks:
/ @handiyman007
✅ Check out our online store and level up your DIY experience: handiyman-007.creator-spring....
✅ CONSIDER WATCHING MY OTHER VIDEOS:
✌ Best Home Office Computer Desk w/ Storage (for WFH Folks, Gamers, or Home Schoolers): • How I Setup My Home Of...
✌ Why a "Computer Mouse Armrest Caddy" is Better vs a Mouse Pad | DIY Computer Mouse Pad Alternative: • How a DIY Mouse ARM Pa...
✌ DIY Wood Shelves for Collectible Toys & Plates | Ceramic Plates Living Room Wall Décor: • I Built 42 Shelves fro...
✌ 2 VIPs Came Out to Help Me | DIY Collectible Plates Shelf Behind-the-Scenes: • 2 VIPs Came Out to Hel...
✌ Finally, a Decent Shower! New Water Pipe Line w/ 3 PVC Pipe Fittings | Shower Faucet Replacement: • Shower Faucet & Water ...
✌ Got a Bad Feeling About This... | Leaking Shower Faucet Replacement | (Shorts): • How I Fixed My Leaking...
✌ How to Install a Toilet Seat Bidet | Best Toilet Paper Alternative | Phito PT7100 Toilet Bidet Seat: • Upgrade Your Bathroom:...
✌ Paid ₱30K to Repaint My Car at Home & THIS Happened! | Kia Carnival 2001 Fiberglass Car Body Repair: • Repainted My Car at Ho...
✌ How to Assemble ANY Ergonomic Computer Chair | Home Office Mesh Chair | Best Ergonomic Desk Chair: • Master the Art of Asse...
✌ Why a Monoblock Chair is the Best Gaming Chair & Home Office Chair | Best Ergonomic Chair: • Why a Monoblock Chair ...
✌ This Stackable Shoe Box Organizer Solves 3 Shoe Storage Issues | Shoe Storage Ideas Like Ikea: • The Ultimate Shoe Stor...
✌ What a Video FEELS LIKE, without SOUND DESIGN | Is It Better or Worse?: • What a Video FEELS Lik...
✅ TUBE BUDDY | The tool I use to help me manage my channel, get video ideas, rank videos and more. Get your free special access: www.tubebuddy.com/hanDIYman007
** If the video was helpful, remember to give it a "thumbs up" and consider subscribing (it's FREE!): / @handiyman007 **
DISCLAIMER: Due to factors beyond the control of HanDIYman 007, I cannot guarantee against improper use or unauthorized modifications of this information. HanDIYman 007 assumes no liability for property damage or injury incurred because of any of the information contained in this video. Use this information at your own risk. HanDIYman 007 recommends safe practices when working on DIY projects and with tools seen or implied in this video. Due to factors beyond the control of HanDIYman 007, no information contained in this video shall create any expressed or implied warranty or guarantee of any result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not HanDIYman 007.
#HanDIYman007

Хобби

Опубликовано:

 

4 окт 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 81   
@HanDIYman007
@HanDIYman007 2 года назад
To watch the full project, "Best Home Office Computer Desk w/ Storage (for WFH Folks, Gamers, or Home Schoolers", click here 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-z9iBxZ-10Gk.html
@DivineRaidenDW
@DivineRaidenDW 5 месяцев назад
I just moved in in a new apartment and had these cam locks ,I was gonna go nuts and use different method to screw the planks. You saved my night man ,great video.❤
@cutuchell538
@cutuchell538 Год назад
You saved my life with this video, I was about to give up on my new desk, I was about to ask help from my bf, but with this video I could finished everything by myself
@adventuremasarira7733
@adventuremasarira7733 Год назад
Life saver. I just finished assembling my study desk and this video helped a lot
@tenshi7478
@tenshi7478 Год назад
Same except it was a dresser my brain felt so smooth
@drellablue
@drellablue 9 месяцев назад
Thank you so so much my mum and I were both almost in tears of frustration but this helped tremendously
@che8527
@che8527 7 месяцев назад
Bless you for teaching me this because I would’ve never figured out how to build my night stand
@summertakacs-michaelsonch8842
Thank you so much! I came here to find out how a camlock and bolt set works while assembling a desk! Bless you for sharing!!!
@mylifeisslow959
@mylifeisslow959 4 месяца назад
I just wanted to say thank you! I never put a table together and the one I got didn't come with directions, but now I can say I have a new desk!
@johndeyoung9230
@johndeyoung9230 6 месяцев назад
Great video, I have to assemble some cabinets I watched some videos on RU-vid but couldn’t wrap my head around what was happening now it’s simple after watching this. Thanks man.
@jennea9885
@jennea9885 2 года назад
Thank you HanDIYman 007! I was putting together a pantry and I could not understand the camlocks. Your video helped so much.
@HanDIYman007
@HanDIYman007 2 года назад
Am glad my video helped 👍🥳
@BeautifulThingsGodhasmade
@BeautifulThingsGodhasmade Год назад
thank you so much for showing me how to use this LOL . I had sat here for a half hour trying to figure it out LOL. Great job ! Thanks you earned a new Sub too.
@kavoral.2683
@kavoral.2683 Год назад
This is the only video that actually helped us thanks again!
@adrigl3371
@adrigl3371 Год назад
This helped me disassemble my neighbor's bookshelf, she couldn’t disassemble it herself, because she didn’t know how these “camlocks” worked and neither did I, but thanks to you, now I know, and now the bookshelf is disassembled, thank you for the video!
@HanDIYman007
@HanDIYman007 Год назад
You're welcome 🤗
@MadeskartengPinoy
@MadeskartengPinoy 2 года назад
This DIY videos teach me a lot, thank you.
@HanDIYman007
@HanDIYman007 2 года назад
You're welcome Ian👍
@matthewmyers7095
@matthewmyers7095 Год назад
Possibly the most useful video I’ve seen
@annisachoir373
@annisachoir373 8 месяцев назад
thank u man! u really saved my sister's life. she's just dying of this thing :)
@sjmsutherland
@sjmsutherland Год назад
Thank you so, so much!! Was really having trouble trying to put desk up, I'd put the camlocks in first and couldn't figure out why they weren't locking!! You saved me returning the desk....now my daughter has a desk!! 🙂
@HanDIYman007
@HanDIYman007 11 месяцев назад
Glad I could help!
@Stbuster31
@Stbuster31 6 месяцев назад
Cam locks are awful
@johndeyoung9230
@johndeyoung9230 6 месяцев назад
I disagree cam locks are best thing since sliced bread.
@weltschmertzz
@weltschmertzz 5 месяцев назад
Only when you don't understand how to use it. It's pretty awesome.
@shreyasrajesh4724
@shreyasrajesh4724 Год назад
Absolutely fantastic video! I was struggling for a while, and then I watched this and figured it out in three minutes. Thank you, sir!
@HanDIYman007
@HanDIYman007 Год назад
You're very welcome!
@troyjusticecabrera7284
@troyjusticecabrera7284 11 месяцев назад
This is the first video recommended after I searched the brand of the screw/nut (whatever it’s really called) I was able to put together my GF’s table. Thank you so much, sir!
@HanDIYman007
@HanDIYman007 11 месяцев назад
Glad I could help!
@user-lq4qc7cv9m
@user-lq4qc7cv9m Год назад
Superbly & precisely explained!! 👏🏻
@HanDIYman007
@HanDIYman007 Год назад
Thanks a lot 😊
@laur100
@laur100 Год назад
Thx HanDIYman - you saved me😁😁
@JuliaInMerica
@JuliaInMerica Год назад
So glad to find you video: I was scratching my head for 2 days trying to figure out those screws😄
@HanDIYman007
@HanDIYman007 Год назад
Glad I could help!
@HeartSoulLeake
@HeartSoulLeake 9 месяцев назад
Thank you. We were recently doing this, and the camlock kept releasing the outer frame panel. We couldn't figure out how to remove the camlock to analyze the problem. Any help would be greatly appreciated appreciated. ❤
@DontNeedToKnow84
@DontNeedToKnow84 Год назад
Are you supposed to turn the nut 180 degrees? That's what my IKEA manual said, but it took a good bit of strength to tighten it the whole 180 degrees, so I want to make sure I didn't budge the lock or something.
@HanDIYman007
@HanDIYman007 Год назад
typically you turn it clockwise and should lock at 180 degrees. BUT there are camlocks where the pointy tip is at the opposite side -- in this case, you have to turn it 180 degrees BUT counter-clockwise. sometimes, it is hard to turn because you haven't pushed in the screw deep enough and the screwhead is catching/snagging on the camlock tip.
@Aylezhong
@Aylezhong 3 месяца назад
Hello, thank you for the explanation, but why is mine loose after installing it? Even though it has been turned tight
@Skittl1321
@Skittl1321 2 года назад
Thank you. This was very helpful!
@HanDIYman007
@HanDIYman007 2 года назад
You're welcome!
@adittttya
@adittttya 3 месяца назад
Saved my day!
@clemsmith2253
@clemsmith2253 8 месяцев назад
my kit came with pre finished nuts. Are these necessary? the bolts are threaded. the pre inserted nut just seems redundant
@manlikeak
@manlikeak Год назад
Man your a legend thanks
@youngd3niro824
@youngd3niro824 9 месяцев назад
Pinoy power ✊🏽. Haha I'm disassembling a table at work and you've helped quite a bit in terms of cam lock functionality and mechanics. Thanks dude! 🙏
@HanDIYman007
@HanDIYman007 9 месяцев назад
Glad I could help!
@therealgamechanger2933
@therealgamechanger2933 2 года назад
Thanks, perfect instructions.👍
@HanDIYman007
@HanDIYman007 Год назад
Glad it was helpful!
@kaitlinleung3764
@kaitlinleung3764 11 месяцев назад
extremely helpful, thank you!
@HanDIYman007
@HanDIYman007 11 месяцев назад
Glad it helped!
@user-zd6xj2iz4n
@user-zd6xj2iz4n Месяц назад
mate God bless you so much. I literally prayed to find a video that can help me - and look what God can do in minutes! the internet- this video is a life saver. Building my second every desk for the first time. God bless you so much! p.s. child of God
@michelleguevara2468
@michelleguevara2468 8 месяцев назад
Super like!!!!! Thanks a lot!!!
@HanDIYman007
@HanDIYman007 8 месяцев назад
Thank you! Cheers!
@sudipmaity8897
@sudipmaity8897 10 месяцев назад
Thanks a lot .... I just started to break the screw to disassemble my table 😂
@RS-bv7ss
@RS-bv7ss 11 месяцев назад
Thank you so much sir
@ev0nka_
@ev0nka_ Год назад
Great video!
@HanDIYman007
@HanDIYman007 Год назад
Thanks!
@Amally14
@Amally14 2 месяца назад
Thank you. I almost didn't buy something because it used cam locks.
@laur100
@laur100 Год назад
Tease out an embedded lock catch with a bobby pin & screwdriver
@CameronDoyle-camystery
@CameronDoyle-camystery 9 месяцев назад
Why are the fasteners not going flesh and turning properly?
@wigginingeneral
@wigginingeneral Год назад
Thanks.
@putriandra3985
@putriandra3985 10 дней назад
Thank you
@athlouk7042
@athlouk7042 Год назад
How do we UNDO it??? My ikea one is stuck and i have to undo it but it doesnt seem to work!!!
@SargenSmee
@SargenSmee 11 месяцев назад
Thanks for this clear explanation. I was trying to put a flat pack trolley together, took one look at the fitting and thought what do I do with this?
@HanDIYman007
@HanDIYman007 11 месяцев назад
Glad I could help
@SargenSmee
@SargenSmee 11 месяцев назад
@@HanDIYman007 do you have a video on these hinges? The flat pack assembly pictures are too small for me to work it out.
@HanDIYman007
@HanDIYman007 11 месяцев назад
@@SargenSmee closest thing I have is this : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-z9iBxZ-10Gk.html
@user-cz8tf7qx1u
@user-cz8tf7qx1u 7 месяцев назад
lifesaver
@joannerowe7673
@joannerowe7673 Год назад
Thank you!!!!!
@HanDIYman007
@HanDIYman007 Год назад
You're welcome!
@tysne3498
@tysne3498 2 месяца назад
i was about to throw my unbuilt table out the window until i saw this video thank u
@jeffcote3062
@jeffcote3062 Год назад
The cam has an allignment arrow.
@RoyaltyK
@RoyaltyK 10 месяцев назад
Life saver! Now, I just need an electric drill
@wanj2
@wanj2 4 месяца назад
oic..then i know.thank you
@elymartin8773
@elymartin8773 Год назад
How to retrieve the embedded white plastic plug ?
@HanDIYman007
@HanDIYman007 Год назад
Try prying it out with a screwdriver
@curtpiazza1688
@curtpiazza1688 2 года назад
👍
@JesusSavesJohn3verse16
@JesusSavesJohn3verse16 2 месяца назад
Thank you for the excellent video 😊 The Lord’s love + grace be with you Hope you are all well and resting in Jesus saving love + grace 😊 Blessings friends 😊
@Raphael-2
@Raphael-2 2 года назад
This is really helpful, thanks!
@HanDIYman007
@HanDIYman007 2 года назад
You're welcome!
Далее
Furniture Cam Lock and Nut
3:27
Просмотров 1 млн
Kit Furniture Assembly using Cam Locks
2:51
Просмотров 50 тыс.
Titus Connectors - Cam & Dowel Animation
0:55
Просмотров 92 тыс.
Wirtz pumps are really clever
12:05
Просмотров 13 млн
How to make Minifix Cabinet
10:49
Просмотров 37 тыс.
Girofix como usar - passo a passo
8:32
Просмотров 488 тыс.
Minifix
1:37
Просмотров 564 тыс.
dowelling jig 3 in 1 hole jig kit  WoodWorking Tools
3:44
How to drill holes for cam lock connectors
5:30
Просмотров 256 тыс.
Застрявшее Кольцо 🤯
0:26
Просмотров 5 млн
20 kg 😂
0:11
Просмотров 1,9 млн