Camo Paint a Jon Boat LIKE A PRO || Part 3

Подписаться 42 тыс.

Просмотров 37 тыс.

50% 1

Project Bottomland Bateau Episode 12:
Today we are showing you how to paint a jon boat like a pro part 3. We had to split this into 3 videos because it is very in-depth and detailed taking you from start to finish on how to do a custom camo paint job on a jon boat with professional-level results.
Watch the entire Project Bottomland Bateau Series:
• Introducing... Project...
Check out great deals and discounts from our channel sponsors:
10% off promo code for Freedom Lube, The most American oil you can buy!
Visit www.freddomlineproducts.com
Use promo code: ATF10
Link to One Hit Wonder Paint:
www.ohwpaint.com/discount/ATF...
Get 5$ off your OHW order use code: ATFHYDRO
Camera gear we use:
Camera Lenses: amzn.to/36rcdE4
Camera Mount: amzn.to/2GqMroQ
Flex Mount: amzn.to/2tIDLHY
Flex Tripod: amzn.to/2ux7CTB
Tall Tripod: amzn.to/36xUgUF
Lav Mic: amzn.to/2t27awm
Products used in the boat repair video series:
Kreg Rip-Cut saw attachment: amzn.to/35PHhxq
Jigsaw blades: amzn.to/2DCjLb4
Straight cut router bit: amzn.to/2ODUMut
Wood glue: amzn.to/2R7DxTN
Wood clamps: amzn.to/2Y6aW2C
Fiberglass resin: amzn.to/2qbD5Jl
Chip brush: amzn.to/380rbTN
10X20 Canopy Cover: amzn.to/2Gzyqsq
Standard Rivet Gun: amzn.to/32afGFW
Large Rivet Gun: amzn.to/33rFeyj
¼ Inch Sealed Rivets: amzn.to/2MBQTEb
3m 5200 Sealant: amzn.to/2McyOgP
JB Marine Weld: amzn.to/2B91iC0
Brazing rods: amzn.to/2nGoa8A
Brazing Flux: amzn.to/2OGsgZz
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE
Rivets: amzn.to/2PJwccl
Welder: amzn.to/2C7OLiv
Welding helmet: amzn.to/2WLNY0k
Welding gloves: amzn.to/2PIMRgo
Angle Grinder: amzn.to/2qglTC0
Flap Disc: amzn.to/2qmaMY4
Float Pods: www.explorebeavertail.com/pro...
22 Inch Light Bar: amzn.to/37zNboI
11 Inch Light Bar: amzn.to/2N2wiJS
LED Navigation Lights: amzn.to/30HJv2J
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE

Опубликовано:

29 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@ironworkerdrew17 2 года назад

This series of videos has given me all the information I need to make an informed decision to paint my Jon boat one solid color.

@SendItJonBoats 2 года назад

LMAO... looks so easy on RU-vid until someone actually breaks it down step by step and shows you what a major pain in the ass it is! My next one will be solid color lol

@ironworkerdrew17 2 года назад

@@SendItJonBoats For sure! You did an amazing job. But I'm honest enough with myself to know that I don't have the mental endurance to take this on and finish with my sanity intact! Keep up the good work. Love your videos.

@chunkybuttz844 3 года назад

Nobody that I’ve seen is this professional in both video production and boat building. Very inspiring I’ve been dreamihg up a jon build with pods and a predator kit I would love an addition to my bass boat

@SendItJonBoats 3 года назад

Thank you. I love my pods, defiantly the best mod I have done so far, and they were really easy to install.

@ironmyno 3 года назад

That is the sickest jonboat I have EVER seen.. nothing even close.

@SendItJonBoats 3 года назад

Thank you! I appreciate that!

@ronniejohnson3781 3 года назад

The send it part with the unicorn kills me 🤣🤣🤣

@SendItJonBoats 3 года назад

LOL.... I need to get some more unicorn footage soon. Maybe when we take the boat out again I will.

@tonytaylor5789 3 года назад

Love the Jolly Roger flags on the side. Great camo job also. You do great work watch all your hydro dip videos.

@SendItJonBoats 3 года назад

Thanks Tony! Got many more cool paint jobs to come. The paint on project pocket rocket is going to be insane.

@ansomriding9542 2 года назад

I live for the end result!👍🏾

@SendItJonBoats 2 года назад

Thanks man! Glad you enjoyed the video.

@robdenman268 2 года назад

Excellent job

@SendItJonBoats 2 года назад

Thank you

@michaelmatte4861 Год назад

Hey send it...I did this after I watched the video turned out awesome..thanks for the tips

@southernslipping4225 3 года назад

Turned out nice I’m about to get started on mine

@SendItJonBoats 3 года назад

Awesome! Hope it goes well for you!

@timroy8949 2 года назад

👍awesome, great job 👍

@SendItJonBoats 2 года назад

Thank you Tim!

@Hsentrepeneur 3 года назад

Love the hard work

@SendItJonBoats 3 года назад

Thanks Kaden... tons of work but it was worth it. Wait till you see the next video with the gator glide and the whole boat painted.... looks freakin swwweetttt!!!!

@Hsentrepeneur 3 года назад

Can’t wait

@Rwseigworth 3 года назад

I want the gator glide and motor video!!! Great project boss! Send it!

@SendItJonBoats 3 года назад

@@Rwseigworth Gator glide video is coming soon... The motor video I can't wait for either. It's going to be nuts. Hope to get out on the water and do some speed testing in the next few weeks.

@hunterterrell 2 года назад

Great video series. Thanks! I used one hit wonder on your Rec and it worked like a dream. I mixed the activator/hardener in the base coat and it’s super tough. Think I still need to spray clear coat on it? I bought semi gloss accidentally so I’m hesitant to spray it and make it to shiny.

@SendItJonBoats 2 года назад

I always use a clear coat but if you mixed the hardner with the paint then it should be fine just like that.

@nickb8618 Год назад

So cold out. That’s t shirt and shorts temps

@SendItJonBoats Год назад

Too cold for me bro! I got that swamp blood and it needs to stay warm!

@Eric.Estrada 3 года назад

Great work in doing a very in-depth explanation. But this is way more work than necessary. From my experience, it's best to start with the lightest color and work to the darkest for a real deep camo look. I guess I should consider doing a video of how I camo paint stuff. It's been a while, but looks the most legit.

@SendItJonBoats 3 года назад

Wasn't going for a real deep camo look, I was going for something close to Mossy Oak Bottomland. You can put the colors on in whatever order you want so long as it looks the way you want it too... and this looks exactly how I wanted it to look.

@dt9094 Год назад

How strong are those pods ? Could you step on them ? Great job on the boat. The paint is awsome, thank you

@SendItJonBoats Год назад

Sure can, I got a video about the pods and I stand on them in the video.

@BrokeBackBob4559 3 года назад

What size compressor are you using to do the paint job with? Love your work and the thought you put into every video that you put out for us guys and followers. I kinda like the paint job when it was just the base color black and the bark yellow with the yellow pirate flags. It really stood out to me. Thanks brother for all the time you spend away from your family for this group of people. You should have put the send it JonBoat logo on the boat somewhere. That’s your call sign of excellence.

@SendItJonBoats 3 года назад

Thanks BigBoyBob, I really appreciate that... which is exactly why I make these videos. I enjoy showing people what I do for a living, and I also enjoy makin videos that are entertaining to watch. I actually did like it too when I had the stencils over the black base paint, it looked cool. My shop has a 7.5hp 80 gallon compressor that I use for the paint booth and sand blasting, I have another compressor to run other air tools, and the activator sprayguns I use for dipping. Its a whole system with refrigerated air dryer, cooling loops, and 5 stage filtration. I am probably going to put my logo on the inside of the boat before I finish it and probably on the trailer as well.

@thientran3330 3 года назад

Came out really nice was wonder how much paint u used total and where you got your stencil from I live in New Orleans

@SendItJonBoats 3 года назад

Thank you, I kinda mentioned it randomly thoughout the video, but it ended up being 2 quarts of tan, 2 quarts of green, 2 quarts of black, and 1 quart of matte clear coat.

@SendItJonBoats 3 года назад

Forgot to answer the other question, I had the stencils made at a local vinyl shop. FInd a t shirt or vinyl company near you and they should be able to make you some.

@evonyjr 2 года назад

Where did you get the patterns to send them for the stencils…freakin awesome videos boss man

@SendItJonBoats 2 года назад

I didn't... told them what I wanted and they made it.

@christophercooper1789 2 года назад

Awesome work on the boat, nice to see someone as detail oriented as me! I have a question totally unrelated to the boat though. Where did you get that camo hoodie you are wearing? I would like to have some made for my business as well. Thanks!

@SendItJonBoats 2 года назад

I got the hoodie on Amazon. Took forever to get here though! Amazon has been slacking big time recently.

@christophercooper1789 2 года назад

Any idea what brand?

@SendItJonBoats 2 года назад

@@christophercooper1789 It was some no name brand, but I search for mossy oak hoodies and they called it a "retro camo" hoodie.

@CD38325 2 месяца назад

How or where did you get those stencils?

@Gunsmith-oj9gk 3 года назад

Great video mate, have you ever tried alcohol and a blow gun to take the stencils off? So fast and works great

@SendItJonBoats 3 года назад

I have never heard of that... you mean use denatured alcohol, just spray some over the stencils then blow it off? Sounds like a winner, I will have to try that. Would have saved me a ton of time.

@Gunsmith-oj9gk 3 года назад

@@SendItJonBoats isopropyl alcohol yeah it gets under the sticky and they pretty much just fall off, we use it for the hot glue that we use for our dent pulling tools

@SendItJonBoats 3 года назад

@@Gunsmith-oj9gk oh cool, I am going to try that. I do a ton of stencil work on hydro dipping and cerakote so that will work out great. I will let ya know how it turns out.

@darussteverson1562 3 года назад

That sounds like it should work just fine.. The only thing I would be concerned about is that doing this style paint, you would be applying the alchohol to a paint that hasn't had a clear coat applied yet. Y'all don't think this would affect the paint? I just got all of my stickers made and I am about to do my boat, so I would love an easier way to remove the 128,942,103 stickers that will be on my boat.

@SendItJonBoats 3 года назад

@@darussteverson1562 Thats a good point, but also worth experimenting with. I know dentured alcohol does not remove the paint as bad as other types of alcohol so I may try it and see.

@wlwalden02 2 года назад

What vinyl did you use for your stencil? I didn't see it in your description. although I should have my wife look maybe she can find it. lol

@SendItJonBoats 2 года назад

Avery Denison SF-231 high heat, same stuff we use for cerakote.

@natelinville4399 Год назад

Send it! How much of each color did it take for the boat? I’m about to tackle this endeavor and was wondering if the half pint would be enough. 1648 as well. It seemed you didn’t use much paint at all.

@SendItJonBoats 9 месяцев назад

1 gallon of black, 2 quarts each tan and green

@ThePeterbiltrucker 11 месяцев назад

Ok where can we get stencils, i also want to incorporate some LSU AND Fleur-de-lis into my camo patten , also putting float tubes a nd my custom logos, 16X48 jon boateaux, sw la here , will probably go back with steering wheel out board

@SendItJonBoats 9 месяцев назад

Custom made and they were crazy expensive.

@chenepierce6162 2 года назад

As a average person wanting to paint a boat what would be a decent size/brand of air compressor to be able to paint/clear coat a boat ? I have a 16x44 I’m going to paint but finding a good budget air compressor is turning out to be rocket surgery.

@SendItJonBoats 2 года назад

Air compressor and budget do not belong in the same sentence! LOL Best bet is to search marketplace and craigslist and get as big as you can afford, dont get anything less than 60 gallon two stage

@undefeatedgaul3201 3 года назад

Hey all this one hit wonder paint says specifically designed for hydrographic applications and says you have to dip it after applying the paint. This is still good and lasts for boats etc if you do no dipping? I don’t know anything about hydro dipping no idea what any of that means

@SendItJonBoats 3 года назад

I use it as regular paint all the time for a living, and it works great. I have painted quite a few boats with it any its held up, no dipping required.

@ericferguson5997 3 года назад

How much paint did it take for the base coat and how many coats? Looks amazing btw!

@SendItJonBoats 3 года назад

Thanks, I went over that in the video series, and I can't remember off the top of my head the exact measurements, but I did make sure to mention how much I used in each video... it was about a quart and a half per color,, 3 colors, plus a quart for clear coat.

@ericferguson5997 3 года назад

We talked earlier today! Thank you for taking my call! Keep up the great content!

@SendItJonBoats 3 года назад

@@ericferguson5997 Oh okay, I thought it was you but I couldn't remember, had a bajillion phone calls today, it was kind of a blur!

@gettinitoutdoors6763 2 года назад

How much of each color did you end up using I plan on doing this to my new boat but I’m doing it as budget as possible paint I don’t want to skimp on paint but I’d prefer not to buy to much paint

@SendItJonBoats 2 года назад

2 quarts of each color is a safe amount on this boat. 1648. For a full one color paint job I usually buy a gallon.

@kervynblasgavilan1139 Год назад

Recapitulating: 1, first paint base. 2, We apply first base of Stikers. 3, second paint base. 4, We apply second layer of Stikers. 5, Third and last paint base. 6, Remove all stikers. Is it right?

@jamincarr5673 3 года назад

What version of naphtha are you using? I google it and like 4 different kinds come up lol.

@SendItJonBoats 3 года назад

I will tell you, but it is super top secret G-14 classified. Just kidding... it is an old body timers body shop trick I learned many years ago. Naptha is the primary chemical in white camp fuel, the stuff use in camping lanterns. The brand I like best is Crown White Gas, sold at walmart.

@davedoughty410 3 года назад

Man this is a bad ass paint job! Gotta question at the end of the video, what is that song and who is the artist?

@SendItJonBoats 3 года назад

Thanks Dave, I buy the music from epidemicsounds.com. That song is called Greasy Boots by Eludant.

@davedoughty410 3 года назад

Preciate it man!

@SendItJonBoats 3 года назад

@@davedoughty410 no problem, anytime

@johnmorales3427 2 года назад

You pointed out you use a designated gun for clear coat, why? Also does it matter if you do the gator glide before the paint?

@SendItJonBoats 2 года назад

If you use the same gun for paint that you do clear you run the risk of colored paint going into your clear coat and messing up the clear. Most people don't clean their spray guns good enough between uses and having paint flakes in your clear will contaminate it. If you can clean really well inbetween uses you can get away with using one gun... but I di this for a living so I do not take any chances. You can do the gator glide before or after, it does not matter.

@daviddeaton942 Год назад

Ok so after a year of sending it, how’s the paint? I’m getting ready to do a saltwater center console and like the color options for the metallic of OHW

@SendItJonBoats Год назад

Still holding up just fine. I paint boats all the time with OHW and it works great

@tylerperry8878 3 года назад

Hey was wondering where you got your stencils that stick to the boat

@SendItJonBoats 3 года назад

I had a local vinyl shop custom make them for me. Anyone with one of those cricket vinyl cutters can do it. I talked about it in the part 1 video.

@tylerperry8878 3 года назад

@@SendItJonBoats I live in Georgia too could I get it from the place u got yours

@SendItJonBoats 3 года назад

@@tylerperry8878 JK Creations. find them on Facebook or jkcreations11@gmail.com

@howingtonfarms6688 2 года назад

Is the clear coat necessary? What's the risk of not applying it?

@SendItJonBoats 2 года назад

yes it is necessary becuase this is a 2 stage paint. The clear coat protects the paint.

@ziggyblue782 3 года назад

Can I use the red metallic and add flake to the paint before shooting it?

@SendItJonBoats 3 года назад

If you want you can OHW sells metallic paints so you don't have to mix the flake in.

@ziggyblue782 3 года назад

@@SendItJonBoats...Thank ya sir.

@masonk7212 2 года назад

Exactly what color paints did u use?

@SendItJonBoats Год назад

dark beige, black, and the green color was custom mix

@shawncantrell3468 Год назад

Where do I get all the stencils for these particular pattern

@SendItJonBoats Год назад

I had them custom made, it was very expensive,

@rcal1308 3 года назад

How much does this whole project cost to set up to include paint guns and the gator Glide to finish it up?

@SendItJonBoats 3 года назад

Not really sure, I will add it all up and do a video. Good idea.

@rcal1308 2 года назад

Hey man, you ever come up with a total cost for going this route?

@garrywaterman7570 2 года назад

No clearcoat on the bedliner paint?

@SendItJonBoats 2 года назад

nah, it works fine without clear coat and is so easy to touch up.

@Twiztidm1nd 11 месяцев назад

What type of paint is the black and dark brown?

@SendItJonBoats 9 месяцев назад

Urethane.

@joegugala6992 3 года назад

Any idea when you going to do the interior of the boat?

@SendItJonBoats 3 года назад

Probably after christmas. Once I get the trailer done in the next week or two, I will be doing some speed testing with the pods and different mud motor combs to see how it does. Then I have to announce what crazy motor build I got going on behind the scenes... and then it will be interior time.

@matthewmagill6775 2 года назад

Do you do this as a business or for a hobby? I'm trying to find someone to paint my 14 foot aluminum monark vhull.

@SendItJonBoats 2 года назад

I do hydro dipping and cerakote for a living. I paint boats here and there when they come in.

@tylerkline9034 2 года назад

What were the colors you chose?

@SendItJonBoats 2 года назад

Custom mix for the green, dark beige, and black.... it was all in the first video.

@tylertolbert7121 3 года назад

What colors did you use

@SendItJonBoats 3 года назад

I talked about it in the first video. Go back and watch it, I showed all the colors.

@Hsentrepeneur 3 года назад

You should do a giveaway for the boat😂

@SendItJonBoats 3 года назад

HA HA... that would be awesome, but no, this one is mine! LOL Im gonna send it!!!!!!

@Hsentrepeneur 3 года назад

Looks sick so far

@SendItJonBoats 3 года назад

@@Hsentrepeneur Thank you

@ironmyno 3 года назад

Hell no...he's got weeks involved with this thing. I'd want to be buried in it!

@SendItJonBoats 3 года назад

@@ironmyno Thats what I got the casket boat for!

@tfrantastic Год назад

Dang…i watched all 3 videos and i loved everything except the fact that you didn’t put in any footage of peeling off the stencils. Why not? Such a big conclusion to the work and it was left out. I was excited to see the layers peel off and see the designs come to life. Oh well.

@TheDtrolinder 3 года назад

Nice paint booth. Why are working outside ??

@SendItJonBoats 3 года назад

The boat was too long and wouldnt fit in the paint booth... trust me I would have much rather been in the paint booth! LOL. I hope I can upgrade this year and get a bigger building so I can fit a bigger booth in there so it will be easier to paint boats.