Campervan Electrics - My RENOGY Setup 

Great to see everything coming together, Great job on the wiring and safety. Happy driving

Dude there are so many videos like yours but this one is the most helpful- I’ve actually been able to learn something useful from you!!!

It's good ,a good clean install you should be proud of that looks neat and tidy and does everything you need , well done mate and thanks for the vid .

Great job, great explanation. Thank you for all your hard work to help us using your experience 👍

Great to see Van coming together well, wish you many miles of trouble free motoring

Great job raul looks very professional.

Great overview and explanation Raul. I was having flashbacks - I’ve done much the same as you on the 12v electrics when upgrading an older Moho. I rate Renogy products high. And yes, I’m tired of having so many different crimpers!!

I love it! Good job 👏

Nice clean setup along with clear information, thanks for sharing 👍🏻

Great Video and very educational

Great video thanks! And nice set up I’m jealous!

Nice job!

Thanks for a very informative video

Nice work. You excepted the challenge and came out on top

Excellent video 👍Thank You

Thanks for showing your setup. Good explanation. I am actually curious about another part of your van build; namely the roof rack you seem to have your solar panel connected too. I’m in the process of starting my build, and I don’t want to have to pull apart my insulation/interior paneling in the future(if I decide to expand my solar for example) So I’ve been considering a roof rack of some sort but would like to keep it low profile. Yours looks interesting. Could you tell me more about it or do you have a video of it by any chance? Thanks!

Hey there, great video! I'm doing my own very similar set-up right only with 2 x 50ah batteries rather than 1 x 100ah. My knowledge is very limited right now, but I've been looking at wiring diagrams and various videos and most people have included bus bars, but you don't seem to have any. Would you be able to share any info about this at all?

Very nice setup. I have same 1000w Renogy microwave and it will not run my 800watt microwave unless I cook at half power. I learned the hard way the 800 watt rating is the cooking power, not the power it actually draws to run.

great video mate. quick tip for getting things to focus. put your hand behind it. helps the camera know where to focus. such @20:10 Thanks

I am about to fit my inverter, same one as you have. Just double checking something, do you fit your AC outlet cable from the inverter to your consumer unit? Thanks.

Best video I've seen so far, everything in one place, rather than relentless hours watching sponsored crap, thank you. Can you do a video on the correct cable for sockets , USB, lights ect, and can you show us the crimping tools/ stripping tools in action. you may already have done this, if so I apologise. Thanks again

what if u install 24v or lower solar panel to the alternator connector, no car used or switch, alternator gives 15v

Hello Raul!!! Thanks for that amazing video. Does yur sprinter have a smart alternator. I have a sprinter 2017. I have a renogy DC-DC 30 a.. Do you know if I have to conect the IGN sinal wire for the smart alternator? Thanks

Love your video really straight forward explanation. Just a quick question I've read that if you isolate the solar that the Renogy DC to DC charger with MPPT will take 50amps from the alternator, so was wondering should i put a 60amp isolator switch in or should I put 30amp in like you have done? Have you had any issues with them tripping? Thanks in advance and hope your system is still all good 🙂

There a few questions about fuse sizes either side of the controller. Please see the Renogy specification available on line states what size cable and fuses to use depending on whether 30 or 50 amp controller.

Thanks for a nice presentation and explanation.. I have a question i hope to get an answer for. You have positive cable all the way from starter battery to Renogy controller but do you need a negative ALL the way from the starter battery to the Renogy controller also? I have seen both variants in pictures. Thanks.

Love you video, can you tell me exactly more about the cables you use for everything please, because I'm so confused with this . please

Hello! Nice video. I'm thinking about maybe going with a similar setup instead of victron. Do you have problems with the mppt shutting off suddenly? I heard people reporting this problem where you had to disconnect all the wires to reset it. Also, when you connect to shore AC power, are you able to charge the lithium battery at the same time? Third and last question, I don't understand much but I've seen on a video that in order to connect panels in series for this mppt, you needed to connect it in a way that would need thicker wires, ever heard of this? Thanks so much for sharing. Cheers!

Bonjour avez vous testez les panneaux solaires souple 175w un bon équipement que vous avez cordialement

Nice

Hello! Can I run this exact set up with two 175w panels? Looking at the 30amp moot/dc to dc to go with, 1000w inverter and the 100ah battery you have. Please let me know!

Great video! Awesome setup! I’m building mine right now and would have a question: if I connect the caravan to the energy at the camping could I use items over 1000watts (more than the inverter can handle when disconnected), or not? Tks!

Hi you have 80amp fuse, in my paperwork for my 1000w inverter it says to use 150amp fuse for the battery

Hi, can you tell me where you got your blade fuse holder from please? Thanks for the information.

Hi pal have u had any problems with the inverter mounted on the wall instead of the floor ? Wall is what I’m thinking 👍🏻

I have built about a dozen battery/inverter units at home in the last few years. Renogy inverters, charge controllers, and shunt type battery meters are my favorites as they have never let me down. I recently put 400 watts of solar panels, Renogy 2000 watt inverter, Renogy 40 amp MPPT unit in our 35 year old camper van. It got a Chins 300 amp hour lithium battery. Such a useful setup! The van surprisingly has come in very handy as a mobile power outlet. I built a gate for a friend and ran my saws, pancake air compressor, charged my battery powered tools. The gate hinges needed to be welded, so I brought my wire feed welder along and the Renogy 2000 watt inverter ran it with no problems. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cXQO80MghOU.html

loved this, easy to follow. except for background music ! why oh why😏😔

Is this set up able to charg your battery from 240v mains or you need separate charger for that?

Nice , any chance to have the drawing for you set up.. please please please

An interesting fact is that microwave ovens are not very efficient - one rated for 600 Watts cooking power may draw 1,000 to 1,200 Watts.

Hi there, how long can it be warrantied?

Are you still happy with this setup? Working well? Thanks

Doesnt fuse holder show light if fuse is ok

An 800 Watt microwave is about 1200 watts input ;)

Shared your experience about how this system make you lose you hairs!! Lol i joke

Hello

Them fuses for your solar need to be a ac fuse not a dc ,them fuses can make fire.

Sorry dc not ac best using solar dc switch

The deep cycle group 31d or m 100 ah can do 70 to 80% of the battery. Not 50%

👍🫡 love renogy stuff

liked , will be doing this in the next week or two.