Can-am F3 Signature Light (install and review) 

Hi Beth, when you going to drill a half inch hole, it’s always good to put a pilot hole through first which is a smaller gauge drill. Anyway keep up the good work. Love your videos , Cliff from Logan City Queensland Australia 🇦🇺🧑🏾‍🦽

Love the video .... Adjusting the clutch on the drill is very easy. Use the collar to twist to lower numbers if you want less power or higher numbers if you want more power. As a general rule of thumb, starting with a lower setting is always recommended - whatever material you are drilling

That was a lot more complicated than I thought. Great job Beth

Thanks for the video! I just did the install today on a 2022 base F3. As far as where to mount the plate: If you follow the negative lead away from the battery, you will see that it has a push mount zip tie connecting it to the frame. Right below that mounting point (tho it is obstructed from view) is a small hole in the frame. And above the zip tie is a more obvious hole. I had to remove the push mount zip tie, releasing the batteries negative lead from that position. Once the negative lead was moved and out of the way everything made sense. Kind of an unfair obstacle. I will tell you mounting the plate to that position was brutal. There was a lot of laying down on the ground, the bolts being dropped into the spyder and obstructed views. Balancing the bolts on the end of the torx driver and slowly going toward the holes reminded me of playing the game 'operation' as a kid. Just wanted to share my experience and thank you for the heads up concerning the drilling.

I attached the parts last week, too. A look is very good!

Great looking F3! The light looks factory perfect

Now some led bulbs, its a lot of fun to install

I so love watching you work on your bikes and doing add on’s and learning what I will need to do when it’s time for me to do the same .

Looks great! I am too old to be crawling around on the ground. I think I’ll put mine on ramps if I do this mod. 😂

Great Job Beth. Light Bar is very Bright

Love mine. Great look for the F3

Wow, that light looks great. Another great install video.

Another good thing to have is stepped drill bits. They won't pull through the material when drilling. Oh , turn the clutch adjustment to "DRILL" and you won't hear that ratcheting sound from the drill/driver. It's the black ring with numbers on it .

Looks fantastic

Thx beth..im gettin one..i have a 22 F3L Special Series..

I love your videos.😘

That's beautiful

Hi Beth🙂Nice Video🤘👍👍👍

I want to get a Ryker but dealers and previous owners say they have tons of electrical problems. Most dealerships in my area don't want to sell them.

Excellent step by step explanation of this complex install. You saved your subs a lot of #$+&@ words.

Several things........... First of all, it is great that you are finally using a wireless mic, but when you do you need to make sure it does not contact anything like a necklace or your hair, or clothing like a jacket of coat. Second, when you drill anything it is often good to start with a small drill bit and work up to your final size. In this case you could have drilled from the outside and you might not have scratched your gelcoat, but the painters tape and cardboard was a good idea. Finally, since I can't watch all the time, what happened to the Ryker and are you selling it? Take care........😎

Nice red color. Looks a lot cleaner than in the Ozarks. I’m guessing that the wiring connection was for a switched connection.

That's brighter than I thought it would be. I might have to get one. Is the color warm (yellow) or is it pretty white, like most LED headlights? I'm installing cooler colored (white) LED bulbs in my headlights this spring and I'd rather it looked similar.

Looks like the light itself may have hidden the booboo?hopefully! Anyways, good job and it looks great! Im a light guy myself and love it when they fit a certain shape like this one does! Im also a ziptie guy!..oh,you appear to be well organized and I like it that you include mistakes and the fact that you might not know everything! Great job!

You could have use a smaller bit first to make a plot hole. 😊Keep up the Good Work 😊😊😊😊😊😊

I was yelling at my screen, hoping i could stop you from drilling that first hole in the frunk insert/ tub. 😊 For the life of me I cant find that connector on my Spyder. The video seemed to show it has a tab or push pin like device. Was it mounted on the frame somewhere? Whe you pulled the battery, what settings did you lose? Thank you.

I’m not sure why you drilled that hole at 5:53 in the storage compartment. Oops! We all make little mistakes.

Us Floridans don’t believe in Foot Wear Beth