No video :(

Can-Am Outlander SNORKEL KIT!!! Step-By-Step Install Tutorial / 2022 Can-Am Outlander 859 XMR

Подписаться 219 тыс.

Просмотров 31 тыс.

50% 1

In this one I install the Can-Am snorkel kit onto the Can-Am outlander 850 XMR. This install will be the same for all sizes of Outlanders. If you have any questions leave a comment below.
Can-am Snorkel Kit: 715002518
As an Amazon Associate I earn from qualifying purchases
TOOLS I USE!!!
DeWalt Impact/Drill Combo: amzn.to/3F0m5sF
T-Handle Allen and Torx: amzn.to/3KTHRSF
Socket Set Kit: amzn.to/41Om6d1
Bike Stand: amzn.to/3Zyig5Q
amzn.to/3ZFf34y
Tire Spoons: amzn.to/3mtIoRb
Rim Saver: amzn.to/3ZJTRKq
Hear Are the links for the products I have installed on my Sur Ron
JFG Foot Pegs: amzn.to/3SOwZHA
Kemimoto Foot peg support bar: amzn.to/3Jfergv
Plug and Play Headlight Kill Switch: amzn.to/3EYtAjS
JFG Handlebars: amzn.to/3SPFhim
Pro Taper Pillow Top Grips: amzn.to/3ZC0LBw
JFG Rear Mud-flap: amzn.to/3KYC0LW

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@michaelblake84 7 месяцев назад

Was a perfect how-to video! Took me 90 min start to finish to do this while install. Thanks for the great instructions.

@Maxsmotoshop 7 месяцев назад

Glad it helped!

@ElplebeTex 2 года назад

Best video I’ve seen on this install yet. You got yourself a new subscriber.

@Maxsmotoshop 2 года назад

Thank you for the support I greatly appreciate it👍

@mpfoote 2 года назад

Thanks for the video. I used a Dremel to cut out the holes. Way easier than whittling away at it with a razor.

@Maxsmotoshop 2 года назад

Awesome I bet a Dremel worked pretty good I just like to use tools in my videos that I know everyone has at home

@WarrenPhillips-vf9xu 2 месяца назад

Great video, very clear explanation..👍

@Maxsmotoshop 2 месяца назад

Thank you🤙

@tonyaponte9834 2 года назад

Very clear and covered every detail

@Maxsmotoshop 2 года назад

Thank you I hope you found it helpful and straight to the point👍

@Miami1kXmr 2 года назад

Followed everything on the web, but only C1 template appears.

@Maxsmotoshop 2 года назад

At the 40 second mark of the video I show exactly where to go and print off the templates👍

@Switching-Cars 2 года назад

Verry nice and helpful video, only thing i would of done is extend the rubber line to the top. Keep up the good work

@Maxsmotoshop 2 года назад

👍

@jacobdeslauriers6768 2 года назад

If u go that deep ur belt box will be full of water anyways

@r1l3yclift42 Год назад

That’s what I was thinking about the belt too

@exodo360hi8 Год назад

can you have a speaker from kicker with a rage mount with the snorkel

@Maxsmotoshop Год назад

I’m not too sure about that. I haven’t seen that system yet.

@This_Guy1 Год назад

This product is pointless.... The only thing extended was the CVT intake... The CVT exhaust and air intake for the engine still sits at the factory level, so you gain nothing but appearance. The installation video was well detailed and informative. It informed me not to waste my money on it.

@nicholasdavis6777 Год назад

your actually wrong. the intake for the engine is getting raised. The cvt exhaust and the cvt intake are staying in the factory positions. id rather get water in my belt box before my engine.

@This_Guy1 Год назад

@Nicholas Davis your right about which intake it is. But once your belt box gets full of water you aren't going anywhere. You are much better off getting a full snorkel kit for the same price.

@mokusgomboc954 2 года назад

Tank you , super video !!!!!

@Maxsmotoshop 2 года назад

You’re welcome I’m glad you found it helpful👍

@dallonspendlove5671 2 месяца назад

I have a little older model it’s a 2014 will the snorkel work and fit correctly?

@Jason000111mmw Год назад

Great video. Now I had the dealership install mine. Now when I get in the throttle it sounds like it’s starving for air. And idea what that can be

@Maxsmotoshop Год назад

Check the tubing coming out of your airbox make sure there are no bends and it is free and clear out the top of the snorkel

@Jason000111mmw Год назад

@@Maxsmotoshop that’s what it was. The air hose was kinked

@mikelebarronjr3480 10 месяцев назад

Great Video ..But what about the big whopping hole on the other side of the benzel ?

@garyholly8376 6 месяцев назад

I have the same exact question. I just installed this and i’m not very happy with the large hole on the side.

@anthonyrobinson3639 4 месяца назад

That's the original cover,you can go online and get the basic cover without holes in it.

@JamieSchaak 5 месяцев назад

What about the transmission intake ?

@Maxsmotoshop 5 месяцев назад

This kit does not vent the transmission intake only takes care of the motor

@neokane 2 года назад

Do you have any videos on the plow limit switch install?

@Maxsmotoshop 2 года назад

No I have not had to install one of those yet

@MrPontiacfever 2 года назад

a white sharpie cost 79 cents to outline the template.

@Maxsmotoshop 2 года назад

OK sure but not needed

@ryank8642 2 года назад

What about the other tubes that comme out of there? I believe its the clutch breeder, should i extend the tubes in to the snorkel? Thanks.

@Maxsmotoshop 2 года назад

If you can figure out a way to do so it might not be a bad idea or look at a different snorkel kit

@ryank8642 2 года назад

@@Maxsmotoshop ok thanks great tutorial!

@shayan202 2 года назад

how did you cover the hole on the right side of the display casing?

@Maxsmotoshop 2 года назад

Your options are to leave it there or buy a new cover👍

@connerbergeron7838 2 года назад

would there be no possible way to leave the original cover on that side and essentially only drill the rivets out on the other side to keep from seeing that hole?

@annexoffroad Год назад

@@connerbergeron7838 I was just at the dealer and they suggest buying the XT cover for $25. It doesnt have the hole.

@MygarageIL Месяц назад

Can i comment on the jz commercial?

@Maxsmotoshop Месяц назад

Jz commercial?

@barrymcglashan6020 Год назад

Will this work for a Outlander XT as well? Thanks

@Maxsmotoshop Год назад

Yes it will

@frenchyangler935 2 года назад

I just bought a outlander xmr 570 & im wondering if I install the horn If it will affect my warranty?

@Maxsmotoshop 2 года назад

No it should not affect your warranty this is a can and product👍

@garret47 2 года назад

No sir it won’t

@Jordankremers Год назад

Hey just a quick question does this raise the air intake and clutch intake?

@koltenpatton7089 Год назад

No it doesnt

@Maxsmotoshop Год назад

Yeah, I was surprised this kit did not, but there are other kits available that do from Can-Am

@mikejd1364 2 года назад

So this is only for air intake? What about cvt?

@Maxsmotoshop 2 года назад

You’ll have to talk to Can-Am about that one I just install the product

@adventureswithzach2207 2 года назад

I’m looking at the 2022 can am outlander 450 dps, will this kit work on it?

@Maxsmotoshop 2 года назад

I think the consul cover is different on the 450 or you might need a different kit

@rydergotham6172 2 года назад

What happens with the hoses

@Maxsmotoshop 2 года назад

They are pointed upwards and ran alongside the air intake

@Maxsmotoshop 2 года назад

This snorkel does not allow you to go any deeper than stock because the clutch breather is still at the same level and will fill with water👍 can-Am products

@tobytoofast 2 года назад

Will the kit fit the same on a non xmr 850?

@Maxsmotoshop 2 года назад

Yes you’ll just have to use the other set of templates to cut a hole in the middle and on the left side of your cover refer to the instructions for placement of those templates

@WWo1mann Год назад

Will this fit my 2023 xmr 1000? @Max Moto Shop

@Maxsmotoshop 7 месяцев назад

I believe so, but look at one of the other kits, but actually snorkels the CVT as well

@joeyboy3209 2 месяца назад

Seems pointless for an extra 10 in of airflow

@redimido4u Год назад

Key word: DREMEL😅

@user-jh4ck2ld4r 8 месяцев назад

Come on bro, ...a knife ? Lol

@Maxsmotoshop 8 месяцев назад

Yep no special tools required. Everybody has a knife but I guess not everybody knows how to use one. Lol ha ha ha OK bud

@user-ee6ri4id4s 2 года назад

"Tim plates"

@Maxsmotoshop 2 года назад

???

@garret47 2 года назад

This snorkel for the air intake or belt intake ?

@Maxsmotoshop 2 года назад

This kid doesn’t do the best job but there is another Can-Am kit that does a better job of snorkeling the clutch

@sheluvwkeys8278 2 года назад

these snorkels make no sense because once you get up to the radiator and it goes underwater your belt will get wet and the only snorkel going up is the intake and the exit will still be underwater so i think these snorkels are useless

@Maxsmotoshop 2 года назад

Yeah I would not get one personally

@sheluvwkeys8278 2 года назад

@@Maxsmotoshop yeah i’ll prob just make some my self to be honest or get warrior riser

@sheluvwkeys8278 2 года назад

@@Maxsmotoshop i would get one if there was a 3 way connect or something like that connecting them toghter but there isn’t

@djsmith3959 Год назад

Wouldn’t swamping the belt box be 1,000% better than swamping the engine though? 🤷‍♂️

@Kayden_todd 7 месяцев назад

their made for a XT not xmr

@BnMProductions11 Год назад

Does this kit not relocate the CVT intake and exhaust?

@olegk455 Год назад

Not this kit. This one is their cheapest kit which only does the engine air intake. Which is all you need for the most part to not get into a lot of trouble.