Can-Am Spyder Front Fender Sequential LED Turn Signals (2019+)

Подписаться 33 тыс.

Просмотров 54 тыс.

50% 1

Can-Am Spyder RT Front Fender Sequential LED Turn Signals (2019+): www.slingmods.com/canam-spyde...
Can-Am Spyder RT Front Fender Sequential LED Turn Signals (2013-18): www.slingmods.com/canam-spyde...
One of the most popular Can-Am Spyder lighting upgrades we sell is our SpyderFenderz for the 2013-18 Spyder line-up, this product converts your boring OE Reflectors to led reflectors that feature built in sequential running light and turn signal functionality. As you may know Can-Am Updated the front fenders for both the F3 and RT lineup in the 2019 model year. So we've partnered up with our friends over TricLED to bring you guys the popular SpyderFenderz for all 2019 and newer F3 & RT models. This kit features DOT Style reflectors, so that when your ignition is off.. your beloved Spyder can be seen at night when parked in unlit areas. Once the ignition is turned on, you'll immediately notice the bright LED illumination of both the amber and red running lights. These front fender lights are not only running lights, but feature integrated "sequential" led turn signal functionality, versus just a standard blinker. The sequential style LEDs not only look stunning.. but drastically increases your visibility when out on the open road during the day or night.
Now, although this fender kit is for all 2019+ F3 & RT Models. The 2019 RT & RT Limited have a slightly different installation on the harnessing, as you'll have to go up to the side view mirror to tap in the turn signal wire, so we've split this sku into two separate items as the installation slightly differs. If you plan on adding any of our additional TricLED Lighting Products down the road, like our Dual A-Arm Strips, you may consider purchasing our optional 1:2 splitter. The 1:2 splitter taps off the same power harness as the fender lights and gives you plug n play expansion for other lighting mods, so that you don't have to remove your front fenders again in the future. This 1:2 harness would be zip-tied to your upper a-arm and lie dormant until you get your next lighting mod, making expansion a very simply plug n' play process.

Авто/Мото

Опубликовано:

1 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@Slingmods 2 года назад

🛒Can-Am Spyder RT Front Fender Sequential LED Turn Signals (2019+): www.slingmods.com/canam-spyder-sequential-front-fender-led-reflectors-spyderfenderz-tricled-2019-up 🛒Can-Am Spyder RT Front Fender Sequential LED Turn Signals (2013-18): www.slingmods.com/canam-spyder-front-fender-led-sequential-turn-signals-running-lights-tricled

@josepht6274 9 месяцев назад

I have to say installed this kit on my 2022 rt limited and love the look it offers. UNFORTUNIITLY the led fender leds are not perfected i have 200 miles on the kit and the left side upper yellow leds are messing up 2 center led lights and two toward the rear of the lens will not lite all the time . I saw one other RU-vid complaining of the same and thought to my self well i have a warrantee well my spyder is not used that much now the warrantee is expired I do not plan on purchasing more sets due to the problems these leds r having.

@fredlee8696 3 года назад

Really want to purchase these but I need to check Maryland laws (hopefully flashing versus blinking is addressed) first - will post update if/when I find out. Keep up the great install videos and products for 2020+ can-am spyder RTs

@barrypontbriand2462 2 года назад

And F3L’s!

@MrSwift05 3 дня назад

I got a set of these for my 2020 RT Limited they lasted about 6 mounts then started to lose random LED's then the left side lost all LED display but if I indicated to the left it would light up Very disappointing I had at the same time put lights on My FS Limited they are still working fine Go figure.

@motorhead16 3 года назад

That grease and tape won't succesfully keep water away. Eventually the contacts will corode. A waterproof plug is the only solution.

@spyderingwithdandenise7064 2 года назад

May I suggest you make an updated video showing how the wiring is done or what it looks like when there are multiple light modifications installed. Front and back. I'm looking to add the rear break flasher and the driver floorboard lights. Over time I want to add more so knowing what the wiring requirements will help.

@Slingmods 2 года назад

Hello, we didn't do one video for multiple lighting mods at once because there's too much ground to cover, which may be overwhelming to watch for some viewers. It'd also be an extremely long video to watch for those that only want to add one lighting mod out of the group. We do however have a video for each independent mod so that you can watch them through as your schedule allows. If you plan on running our floorboard lights.. you'll need our 1:2 front fender power harness located here: www.slingmods.com/canam-spyder-f3-rt-front-fender-expansion-power-harness-2019-up If you plan on adding more front end single or dual color LED lighting, such as our front or rear facing dual a-arm strips, you'll also need our 1:4 splitter that allows you to run up to 4 LED front end lighting mods off of that 1:2 front fender power harness. That can be found here: www.slingmods.com/canam-spyder-led-power-expansion-harness The rear end lighting is independent from the front end. All of the rear end lighting mods use Plug N Play connectors, so that you can add one or daisy chain multiple mods on the same bike. I hope this helps. Our customer service team is always available to answer any questions you may have. Thank you!

@dead_phallus 2 года назад

7/32 drill bitt is not large enough for the plug to pass thru. I'm at 5/16 and still to small

@1sttwin34 2 года назад

What gauge wire is connected to the quick connectors.

@EssTEye 3 года назад

For anyone that's curious, the torque spec (according to the manual) for the fender bolts is 18 +/- 3 lb-ft. Note that the manual says new bolts are required, however, I put some blue locktite on it and called it a day. I do not recommend replacement as they are not TTY (torque to yield) bolts. They had yellow thread lock on them when I pulled them out, so put some light to medium thread lock (NOT RED) and you can reuse the bolts.

@yusufbaker6602 2 года назад

you probably dont give a damn but does anybody know a method to get back into an Instagram account? I was stupid lost my account password. I would love any tricks you can offer me!

@lewisnoel8447 2 года назад

@Yusuf Baker instablaster =)

@yusufbaker6602 2 года назад

@Lewis Noel I really appreciate your reply. I found the site thru google and Im trying it out atm. Seems to take a while so I will reply here later when my account password hopefully is recovered.

@yusufbaker6602 2 года назад

@Lewis Noel It worked and I actually got access to my account again. I'm so happy! Thank you so much you really help me out!

@lewisnoel8447 2 года назад

@Yusuf Baker you are welcome :)

@ShaughnGray Год назад

Nice set of lights but instructions should include the fact that there are left and right red lights. I followed these instructions to the T and tested prior to taping everything up but didn’t notice that the red lights were cycling in the opposite direction of the amber running lights. I noticed the lights cycling in opposite directions once everything was installed. My bad for not noticing before reassembling.

@blackkitty1774 Год назад

Thank you for pointing it out.

@billwilliams9527 4 года назад

Nice mod, for the 2020 RTL install, is the plug and play at the fender or at the mirror?

@Slingmods 4 года назад

Hello Bill, for the 2020+ RT & RTL you will have a 100% Plug N Play connection at the fender harness. Only the 2019 RT & RTL Models will require an additional turn signal wire to be run up to the side view mirror on each side of the bike. Thank you!

@chill62751 4 года назад

I have a F3 Limited, and installed the A-arm lights. They get very warm. Will the fender light handle the current load of the A-arm lights on the 2019 and 2020 models?

@Slingmods 4 года назад

Hello Mark, yes on the 2019+ models the A-Arm lights are designed to plug directly into the optional 1:2 splitter that comes off the fender harness.

@crewznn01 Год назад

Also they don’t mention the fender frame, I had to take that frame off to get the plug thru.

@user-ym6pq3kr8l Год назад

Can Arm Spider Front Fender Sequential LED Turn Indicator (2019+) I purchased it in September and attached it. Since May 22, LED lights have broken down one by one. 6 lights at the beginning of the right / 3 lights at the center of the left It won't get stuck. I request an A/S.

@Slingmods Год назад

Hello. Our products are under MFG warranty. You can reach our Customer Service Team for a replacement here: www.slingmods.com/index.php?route=information/contact

@barrypontbriand2462 2 года назад

Is the red rear light so bright, that it imparts your viewing at night. By this I mean the glare from the LED light for the driver.

@Slingmods 2 года назад

Hello Barry, they're extremely bright if you stare into the LED's.. but I wouldn't by any means say it inhibits you in anyway. I'd encourage you to read the reviews on this product with the link below to get real customer feedback prior to purchasing so that you can make an informed buying decision: www.slingmods.com/canam-spyder-sequential-front-fender-led-reflectors-spyderfenderz-tricled-2019-up Thank you!

@henrystarks354 Месяц назад

Will not fit my 2023 RT Limited I have a steel frame underneath so I cannot drill through it but they say it will fit 2019+

@Slingmods 29 дней назад

Hello Henry, this is compatible with your model. Please give our Customer Service Team a call at your convenience so that we can further assist you sir. Here's the link: www.slingmods.com/index.php?route=information/contact

@user-ym6pq3kr8l 2 года назад

2021 Spider RT Front Wheel Cover Don't you have any LED products in stock? Can't I buy it?

@Slingmods 2 года назад

Those are on backorder at this time. We will update our website status just as soon as our next batch arrives. Thanks!

@SNVRC Год назад

Been hearing people having problems with VSS because of lights and that these don’t last more then a year have you guys had that problem?

@Slingmods Год назад

Hello Southern, I'd encourage you to reach out to our customer service team for more depth on that topic as our youtube comments are responded to by the media team. You can submit a support ticket here: www.slingmods.com/index.php?route=information/contact or contact us by phone at 800-211-1396 Mon-Fri 9am-5pm PST. Thank you!

@paulreilly8215 3 года назад

Will this add-on work on my 2013 Spyder RT

@Slingmods 3 года назад

Hello Paul, for the 2013 model RT.. you would need this version here: www.slingmods.com/canam-spyder-front-fender-led-sequential-turn-signals-running-lights-tricled

@TheBlueBikeDoyle Год назад

My lights are starting to burn out i got this back5/16/21

@Slingmods Год назад

Hello, please contact our Customer Service Team at your earliest convenience and we're happy to help. Here's the link: www.slingmods.com/index.php?route=information/contact

@robertlindstadt7932 2 года назад

You need to change the pop up About a 7/32 drill bit to drill holes

@Slingmods 2 года назад

Hello Robert, that's what was on the MFG instructions provided to us at the time of the install. Was the drill bit size we mentioned too large or too small? What did you end up using?

@robertlindstadt7932 2 года назад

@@Slingmods well it was closer to 7/16 maybe a tad smaller, the white connector needs to go through hole

@kdub607 2 года назад

@@Slingmods way too small - I had to go up 2 bit sizes to make it work. The 7/32 is only big enough to barely get the plug through. What it doesn't account for is the wide plastic pin connector.

@Slingmods 2 года назад

@@kdub607 Thx for sharing Keith. Maybe the MFG increased the connector size since our video. I'm sure others will find your feedback quite helpful. Thx for sharing.

@kdub607 2 года назад

@@Slingmods thanks and hopefully folks noting. For you guys and gals at SlingMods - I absolutely love the lights, very nice look when it's complete! But as I know it's been mentioned before, please please please update your videos! Beyond for the obvious, it's because (1) as we're addressing, if something has changed on the specs, customers will appreciate knowing and having the right tools, and (2) this one is just as important - the product comes with no installation instructions! So we are depending on your videos as install guidelines! I realize that it may be more for entertainment and we should have things professionally installed, but when spending lots on a product, the last thing anyone wants to do is spend even more on installation fees. Making the install videos seem so simple is a good confidence booster, but they are rarely as simple as our man Brandon makes them seem! So please consider updating most videos to accommodate newer models and changes. The products and the SlingMods company is awesome - one of the best places to get your fix of Can Am and Slingshot accessories! We could use a little more help on installation videos to get folks successfully putting on their mods. Thanks much guys!

@qt002 3 года назад

There is NO NEED to remove the fender, which is a pain in the butt. Remover the tire, and remove the panel nut. Drill the hole, wipe the fender with alcohol install the wire thru the hole, secure the light. Run and tie wrap the wire. Install the wheel. One heck of a lot easier.

@Slingmods 3 года назад

Yes, you could absolutely remove the wheel instead of removing the fender. Based on our phone conversations with customers, most are not comfortable removing the wheel so our video shows an alternative route to installation while keeping the bike on the ground. Thanks for the feedback!

@chongmoua4819 7 месяцев назад

That’s what I thought too! Why not just remove the tire?!

@MongTV21 Год назад

How much is that kit sir

@Slingmods Год назад

@rafaeltelli6028 4 года назад

Hi dears, im from Brasil. Rss spyder, not vídeos??

@Slingmods 4 года назад

Hello Rafael, we don't own any of the older bikes, so our primary focus in the Spyder world has been the F3 & RT models. Thank you!

@leroythomasjr2201 10 месяцев назад

Sling Mod y'all have a major problem with these lights. I purchased four sets for two F3 one F3T and Ryker. On all the Bikes the LED lights started going out less than within 2 months. Ryker person returned his and his new set is starting to burn out again. Nothing but junk... 🤬🤬🤬

@Slingmods 10 месяцев назад

Hello Leroy, my deepest apologies for any issues you're experiencing. We'd like to work with you and the MFG to get the issue resolved for you. Can you please provide me with your order# so that our Customer Care Team can contact you for resolution. Thank you!

@leroythomasjr2201 10 месяцев назад

@@Slingmods What are you going to do give my money back after it's been over 30 days? I just trashed them today and replaced them with another brand. It's a shame these lights don't last long at all... Y'all seriously need to look into this problem...

@Slingmods 10 месяцев назад

@@leroythomasjr2201 Hello Leroy, what's your order#?

@leroythomasjr2201 10 месяцев назад

@@Slingmods I've emailed it to you... I'm not putting my order number on RU-vid

@leroythomasjr2201 4 месяца назад

I'm telling people to stay away from these led lights. I am going to a lot of can am bike shows this year and I will definitely be telling people about my experience with slingmod. I'm very disappointed and will never buy anything from y'all again. I've sent emails and my order numbers and now slingmod has ghosted me.... Truly unprofessionally bad for business company...