Can This Audi Engine Be SAVED? Coolant Mixing into Oil

Подписаться 922 тыс.

Просмотров 260 тыс.

50% 1

Oil mixing with coolant is normally a head gasket. This Audi engine wasn't a bad head gasket, but still had oil and coolant mixing issues. This video we flush the engine oil in an attempt to save the engine. The best repair for coolant in the oil is a full engine teardown to check/replace bearings. This car is NOT WORTH THAT!
IMPORTANT LINKS
3.0 PCV replacement DIY ~ • How To Replace Audi 3....
Oil Funnel ~ bit.ly/2mHDyRr
Liquimoly Oil Flush ~ amzn.to/3gVsrQQ
Liquimoly Mos2 ~ amzn.to/3UaJz3S
Liquimoly Ceratec ~ amzn.to/3DKyKQf
Milwaukee Wiz Wheel ~ amzn.to/3UfhAQi
S4 PCV Kit ~ bit.ly/3TlFkSB
Green Roll Disc ~ amzn.to/3NkYrKc
S4 Video Seires ~ • Audi S4 Videos
~~~~ Support the Show ~~~~
Become A CrewMember ~ goo.gl/D7eROI
Patreon ~ www.patreon.com/user?u=4243029
Shop Amazon ~ amzn.to/2FQErAm
Audio ONLY Podcasts ~ goo.gl/5XcZxB
~~~~ Recommended Tools ~~~~
Impact driver ~ amzn.to/2HsxS2H
Small Impact driver ~ amzn.to/2DZdsMN
Electric ratchet ~ amzn.to/2FydxMS
Magnetic tray ~ amzn.to/2FEpQ6g
Basic hand tools ~ amzn.to/2GnjF7K
Box wrench set ~ amzn.to/2FzoJch
ScrewDriver set ~ amzn.to/2FEjcgd
Shop towels ~ amzn.to/2FC7UgM
Torque Wrench ~ amzn.to/2I7ke5h
Allen Sockets ~ amzn.to/2GlcnAz
Torx Sockets ~ amzn.to/2pL0SfL
~~~~ Playlists ~~~~
Humble Mechanic Podcasts ~ • The Humble Mechanic Po...
Project White Wookie ~ • MK3 VR6 GTI Project Car
Failed VW parts videos ~ • How VW Parts Fail
Tool and Product Reviews ~ • Tool and Product Reviews
How To videos ~ • How To Fix Your Car
MK1 VR6 Swap Videos ~ • VR6 Engine Swap MK1 Ca...
~~~~ Be sure to follow me at ~~~~
humblemechanic.com
INSTAGRAM ~ / humblemechanic
FACEBOOK ~ / humblemechanic
TWITTER ~ / humblemechanic
Amazon Store ~ www.amazon.com/shop/humblemec...
disclaimer:
The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle, nor does it create a relationship of any kind between the Humble Mechanic and you. Every situation may be different, and the Humble Mechanic does not make any warranties, whether express or implied, as to the accuracy, fitness, or applicability of the information or automotive parts portrayed in this video to any project and makes no guarantee of results. The Humble Mechanic and any sponsors of this video will not be liable for any damages related to personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any automotive parts represented in this video. You are using the information and automotive parts portrayed in this video solely at your own risk.

Авто/Мото

Опубликовано:

5 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 226

@HumbleMechanic Год назад

RU-vid SPAM IS OUT OF CONTROL! I will never contact you for your info or to message me anywhere like WHATSAP! DO NOT click that stuff on any RU-vid channel

@bagelbandit6076 Год назад

It was just a joke😂

@82_KID Год назад

Amen!!

@Peter_Riis_DK Год назад

Yup. Report the suckers every time you encounter one.

@82_KID Год назад

It gets even worse when they post a pirated contact what they do is if you leave a comment linking to your actual comment then they report YOU as spam.

@xmurray5361 Год назад

❤

@jwick2866 Год назад

All I can say is this, sir you are an absolute rock star! Thank you for doing all that you do for the community.

@mcosta6423 Год назад

You, sir, are a legend! The only bad thing about your videos is that they end! =( Thanks for the hard work and all the information you provide. Cheers from Brazil!

@jec_ecart Год назад

It was definitely worth a save. Do keep us updated on long term reliability & mileage.

@SuperMarioDiagnostics Год назад

Looks like Bob Ross mixing paint in the intro

@Peter_Riis_DK Год назад

"Better call Paul" - pretty catchy. He should use that as a slogan. :) And - btw. - I'd have done exactly as you did, C. I would perhaps, just out of curiosity, send the last flush sample to be analyzed too see how much coolant remained - if any.

@Jimboslicevr Год назад

I love how honest you are about if that was the better route. Love the content man!

@russellvoth5161 Год назад

Thanks for educating me on my VW vehicles love your videos and content. Great job keep it up.

@iowaland7658 Год назад

Hey charles! Love the content even if it doesnt apply to me. You always make entertaining videos and i learn something from you. Just want to say thank you!

@HumbleMechanic Год назад

I really appreciate that ! THANK YOU

@NoReverse77 Год назад

Killed it as always Charles. thank you.

@pcgrey69 Год назад

Awesome video. I am a big believer in flushing an engine when they gunk up. Good job man.

@sursomsatan1225 Год назад

As opposed to promoting more buildup?

@markae0 Год назад

@@sursomsatan1225 No some people only replace the filter and change the oil once, while he changed the oil until it ran "clear" and cleaned the oil pan 2X of the residue.

@JoeyGLI Год назад

That ending where you cut the see right before was beautiful 🤣

@82_KID Год назад

I’ve had to replace a few engines on my Subaru. I like that you love Audis and VWs, HumbleMechanic!

@GregSchremp 10 месяцев назад

Thank you Charles! Same problem with my daughters Audi q5 and replaced the PCV...working like a champ. Made me look like a master mechanic to my family. ha

@steverasmussen1905 Год назад

Awesome videos Charles! Thanks you are the man.

@alejandrovelazquez2378 Год назад

Keep it up humble mechanic 🦾🦍🔧🧑🏼‍🔧🏴‍☠️

@Lord_Verminaard Год назад

"A little noise from the timing chain, it's fine...." FORESHADOWING! 🤣

@rashaadhartley2145 Год назад

Welcome back, Iv missed you lol

@kennethd7048 Год назад

Ok Charles, here's one for ya. 2006 Honda Ridgeline. The oil cooler/ radiator cracked and antifreeze into the oil. Replaced radiator..So, the system was drained and we added water and a dawn dish washing liquid, did that eight times cooling system .. obviously and a few oil changes with sea foam and refilled with factory authorized VW coolant (kidding) and sent it..i understand that this is Audi VW show but guess what.. the pistons go up and down, the wheels go round and round... you're a good teacher by the way. I wonder if there is a way known to man to re-engineer the pcv system on that engine?

@MrPhilkite Год назад

Another awesome video!! Now it is time to work on the TT!!😀😀

@TTAutowerks94 Год назад

Awesome video yet again from the one and only Humble mechanic 👌 Reminds me or how I like to treat the inside of my engine and customer's when servicing, I'll always change oil first before using a flush (if the engine oil is too old or feels physically garbage) Then it's the safest way to thoroughly flush the engine without much risk of further damage.. Liqui MOLY for the win 💪 I use their flush, conditioner and fuel treatments, I also use LUCAS oil treatments and BG products 👌 Love the attention to detail in all your videos thankyou for the content Much 💜 from the UK

@patkelly7999 Год назад

Great job Charles, like new again👌👍🙂

@PapaJMemphis Год назад

Charles, you just broke my world! I've done probably 15-20 oil changes with LiquiMoly and I never realized there was an oil change sticker ON THE BOTTLE. I'm so mad at myself for never noticing this. How could you do this to me?

@HumbleMechanic Год назад

Hahah that’s how I felt when I learned that!

@Fastboi69420 Год назад

Huh I never noticed either. But I do 5k intervals on my ‘19R so it’s hard to keep track… unfortunately my alternator last month failed 1000 miles out of warranty, and it gave my its first epc & cel last week… suspecting injectors 🤦‍♂️ I also went eqt stage 1 right after my warranty ended so no chance of getting either of those covered anymore…

@MrDk6851 Год назад

Bravo.. I wish I was there to work with you.. Machine's, Repairing, Maintenance, Overall care, etc.. Love from India.

@MrDk6851 Год назад

@Main_HumbleMechanic Thanks! Dipak here

@ernestprice1837 Год назад

Just a little noise from the timing chain - its fine Outstanding video

@HanifEFIMechanical Год назад

Good work

@nickayivor8432 Год назад

ACCOMPLISHED HUMBLEMECHANIC TUTORIAL BRILLIANT VIDEO AMAZING THANK YOU VERY MUCH FOR SHARING IT. TAKE CARE AND HAVE A GREAT EVENING WITH ALL YOUR FAMILY AROUND YOU ACCOMPLISHED HUMBLEMECHANIC From Nick Ayivor from London England UK 🇬🇧

@mabayoumi 4 месяца назад

Awesome video. I have same noise from timing chain I already done timing chain tensioner changed. does it me make me worry?

@MyzteryMedia Год назад

I was looking into a b8 s4 and thanks to this and your recent video on this I know about the pcv coolant issue (all euro pcv is shit) informative video! Meeting you in person and seeing your vids after it’s crazy how you’re the same person 🤣

@HumbleMechanic Год назад

The comment about being the same person means the world to me! Thank you

@adriannp. Год назад

1.9 tdi PD. This engine got me mad years ago (and still), the fker mixed drop by drop the oil in the coolant system passing throught the head gasket, the coolant was fine but after some months the coolant looks really bad. What a pain in the ass, amazing engine, amazing troubles...

@JacobLambeCarGuy 4 месяца назад

One very important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?

@JamiesGarage1 Год назад

I’m like, how does he know people put their hand behind products in make-up reviews, then I’m like… why do I know that too? 😂

@HumbleMechanic Год назад

😂😂😂

@fahrudinhasanovic5432 14 дней назад

My a7 is in the shop for this right now praying it is not a gasket 🙏🏻

@user-oo3hw3xz1y 9 месяцев назад

I've been watching your videos for years. You are amazing. Unfortunately, my daughter added power steering fluid (ATF) to the coolant reservoir of her 2015 Tiguan and drove a few weeks. Any recommendations besides flushing several times with distilled water?

@jahndolo Год назад

Great stuff. I have an issue (bpy mk5) where my oil is getting diluted by gas. I've put in fresh injectors, followed by a new pump. Still getting dilution. I did reuse my autotech hpfp internals on the new pump then put it back to stock but it made no difference. Gas is mixing with my oil. Any advise on what to check?

@calvinchurch4304 5 месяцев назад

Hey love you videos. I was just wondering if you could do a video with best and worst VW/Audi engines. Looking to buy and Audi 2023 Audi S3 or a Golf R. Or maybe tell me what you think of those engines. Thanks

@gplusgplus2286 Год назад

Of course it was the right course of action what you did. No need for opening up an engine if that process fixes it and it was the pcv that caused all of this..

@rw-xf4cb 2 месяца назад

Any follow up on this after a year the engine ok? Or it starts put it on for trade-in?

@mituc Год назад

Awesome video as usual! But oh man, you should make that outro like a meme or something: "Just a little noise from the timing chain! it's fine!". At least the mazdaspeed community will cheer in some sort of planetary chorus at fixed hours every day for several months in a row :)

@HumbleMechanic Год назад

Hahhahaha

@glennarnold3970 Год назад

hi charles have you ever seen fault16346 rom error 014 defective before on a a3 8p also no coms to cluster but everything works? i had keys programmed to cluster 3 months ago but i like to hear your take on it cheers from down under

@christiankirkenes5922 Год назад

The best thing about Royal Purple oil is that if you forget the drain plug on the sump you can see it on the concrete.

@WilliamPirtle-rn6tv 15 дней назад

Hey Charles, how has the Audi held up since the PCV repair? I have the same issue, about to do the repair. Thank you!

@Aleks_Mechanics Год назад

Notification squad Have a nice weekend!🔥🔥🔥

@HumbleMechanic Год назад

@TheReadBaron91 Год назад

What’s the part number on that Mann oil filter? Looks like an oil filter we use on a converted Mercedes engine for aviation use.

@itspaperboy Год назад

What sealant did you use?

@clayniemann2608 Год назад

Great video. I like the joke about reading the directions for the LIQUI MOLY engine flush. There aren't any. Not even an indication that it goes in the oil hole and not the gas hole. I like their stuff. Just think it's funny they don't put any directions on how to use it on the can.

@NoDayz0ff Год назад

EPR by BG is an awesome engine flush restoration additive, you should do a video on it

@elev8j10 Год назад

Milkshake is not what you want to see in an audi. I picked up a B6 A4 1.8t 5 speed with some good performance goodies that had a blown timing belt for super cheap. Made the mistake of getting a "tested" head on ebay. When got it I knew I should have taken it to the machine shop to test it all myself instead of just believing this place but I didn't. Ran great but after it got warmed up oil and coolant mixed very quickly. I thought maybe it was possibly my doing so I did it all over again triple checking everything with a better brand head gasket. Same thing. When it got warmed up... boom immediate mixture. Finally took it in to the machine shop and of course cyclinder 3 on the head had a crack and when it got warm it was expanding and mixing. I was pretty upset to say the least. It's a good thing I was constantly checking oil and I caught everything quick. With a proper rebuilt head and a few flushes it was good to go. But you just know even running 30 sec with coolant in it has some consequences. I'd say it just depends how long he was driving it after that coolant light hit. Awesome how a failed pvc can lead to total engine failure. Way to be Audi.

@HardWhereHero Год назад

Can you get your hands on a 99-05 (MK4 ish) 01M transmission? If so, can you do a video on them and their reliability, or lack thereof.

@SpaceCadet4Jesus Год назад

Pull out that package of JB Weld, bubble gum, bailing wire and duct tape. Something in there should fix this right UP ! 😆

@The_Stick Год назад

Thank you Charles. Would you consider making a video on changing the diff fluid on the MK7 R?

@HumbleMechanic Год назад

I think I have? Wait have I? Lol I did my mk4, it’s pretty much the same. Hahahha now I have no idea

@The_Stick Год назад

@@HumbleMechanic You're right! Somehow I completely missed that video.

@CallMeDezy Год назад

You could have easily keep the flush for an hour or so and rev it up to around 3000rpm for 20-30 seconds every once in a while, I usually do that when changing the engine oil and it may clean the engine better than just 10 minutes of idling. There are also "long life" engine flushes available where you can drive a car reasonably for 30-50 kilometres before replacing the oil, that would've been great for this particular engine imo.

@TooBlessedToStress88 10 месяцев назад

Liquimoly states to idle and not rev or drive. You don’t want the crude being knocked off to circulate at a elevated rpm to score the internal as the crap coming off is abrasive. Keep wrenching my friend.

@CallMeDezy 10 месяцев назад

@@TooBlessedToStress88 yeah Archoil states NOT to drive your car, yet their technician says you can drive no worries for around 50km, it's just a fail safe for the company

@jerryx2000 Год назад

Hey man I want your honest opinion. I own the A4 B8 2.0 TFSI since 2011. The engine was using 1l oil per 1000km. I got a new Audi motor in 2014 for free as the car was under warranty. Since then no oil usage, just the cooler went bad in 2020. Now the car has 190,000km & it is running perfect. Would you sell the car or keep it for another 200,000km?

@gothicpagan.666 Год назад

Pure logic

@nrvsauto8990 Год назад

Does this issue also occur on the 3 lower turbo engine?

@sursomsatan1225 Год назад

This is among my top 5% channels, I just wish you'd do more builds, tying together the knowledge-oriented content you produce. Sure I can go somewhere else for VAG builds but lose out on your personality doing so

@HumbleMechanic Год назад

Thank you!!! Builds are coming I have several in the pipe!

@robkaniuk6384 Год назад

Can you do a ko3/ko4 rebuild video

@ariacarstechnicalchanel4305 Год назад

I have a AUDI Q3 diesel engine same complaint as engine oil mix in coolants

@Troy_Built Год назад

To save money in a similar situation I've taken the oil out of other cars present to use for a flush. Those cars get an oil change and I don't feel like I'm totally wasting fresh oil.

@erickbren8702 Год назад

man I have a question for you about chain deviation in 3.0T CAJ. I am logging 12 KW degrees on one bank and I believe 10 in the other one. This is clearly a problem with the timing of the chains. I do have the service manual (PDF) but the: "how to put the engine on time after losing time" section is not there. Can you please help me?

@RumpleXstillXskin Год назад

That’s the stuff big Mac’s use for choco shakes lmao 🤣

@eppyz Год назад

Charles totally off subject, but I noticed you have LiquiMoly banners up and what not, as far as 508 oils are concerned, which one do you like the best and why? Just curious from a VW mechanics point of view. Thanks 👍

@shanel104 Год назад

My oil looks like after 2nd and 3rd flush, after doing a headgasket? It was the first load of oil since fixing the issue, is coolant still entering oil,

@deingolfcabrio Год назад

Could you make a video on how to change the break rotors and pads on vehicles with an Electronic Parking Brake? :)

@pauliroha5506 Год назад

Hello Charles, I have an Audi q7 with the 3.0TFSI engine. There is coolant inside my engine. However, the coolant-oil mixture hasn't circulated through the radiator to the expansion tank. I have checked the oil cooler and I can't find the oil-coolant mixture. I am suspecting my coolant pump to be bad. Could this be a head gasket that is blown? How do I know the bank of the head gasket that is blown if that's the cause of the milky mixture? What else should I check before attempting the head gasket. Many thanks.

@Romesstation Год назад

Great video, however the oil filter clips into the cap and then is inserted into the housing. There are tabs on the cap for the filter to grab into.

@Romesstation Год назад

Now, why would I do that Spammer.....

@stephengreen3566 Год назад

Just a little noise from the timing chain, it's fine. 🙂

@nickchesshir6994 Год назад

I’m still waiting for some 3.6 videos Heck I’d lend you my car for some since it needs the chains done anyways but I believe I’m a bit far for that

@agrautomotivellc3283 Месяц назад

Hey Charles, what about oil in the coolant?

@propm Год назад

Well, I did not have this specific issue, but I got a low oil pressure on my Audi A4 2.0 TFSI four days after I bought it, that was a bummer, and I was so close to my house and decided to drive the last few hundred meters, lucky only the turbo died, and judging by the amount of oil in the intercooler it was already in bad shape so I guess it's not a big deal. but yeah, the oil pickup was full of gunk causing the low oil pressure. It was a pain in the as to take off the oil pan, I had never struggled so hard taking an oil pan off a car before. It's up and running now and I been driving it for a few months, but it had 273K Kilometers on it and I did not pull the whole engine apart, I just put a new turbo on and tried it. But it uses a lot of oil, both before and after the turbo change. I don't know if flushing can help with that.

@p_h_6376 Год назад

hey, can u make a video where u change the upper chain tensioner ?

@HumbleMechanic Год назад

I may do that when we manual swap it

@p_h_6376 Год назад

@@HumbleMechanic nice, can u show us the vcds steps when u swap it ?

@VenturiLife Год назад

LiquiMoly stuff is one of the few potions you should use in your car.

@Haimmmm 5 месяцев назад

Hi Charles, I have a similar problem on a VW Passat B7 the thing is that the oil cap didnt have mayonnaise lol (coolant mixed with oil) and so neither the dipstick. I thought it was the oil filter housing assembly which has the oil cooler attached into it, so I replaced it with a new one and tried to flush it but it keeps mixing oil with the coolant. I havent done a full drain the engine oil but I dont think I shoud since there is no mix on the oil cap or the dipstick. But heres the thing, it keeps mixing after replacing the oil filter housing and when you rev it spits a few drops of water form the exhahut. Tbh I dont now if its condensation or Im about to lose my mind with this car. I read online about the oil cooler, sometimes it fails too and you have to replace it in order to stop the mixing. Any suggestions on what should I do next?

@Bucket_Boy101 Год назад

I'm starting engineering at university in a couple of weeks. My Goal is to work somewhere at VAG (and convince engineers to use less plastic in engines lol)

@giuberneadragos8284 Год назад

Hy! that water was comming from somewere maybe on hy tempereture that mean that the cylider gasket may be damage or gas cooler gasket or gascooler itself

@sebastianlorenzo4935 Год назад

If there were pumpkin spice oil maybe I could get my wife to do her oil changes. 😂

@danielyombalakian7534 Год назад

Creo que vale la pena hacer todo ese trabajo siempre y cuando se elimine la raíz del problema: porqué se mezcló el refrigerante con aceite? si se evalúa que la reparación no es costosa y que la salud del motor no se haya visto afectada

@vick10036 Год назад

Chocolate coolant? Santa would love this

@SpaceCadet4Jesus Год назад

Coolant mixing into Oil. Well, thank God the oil didn't mix into the coolant system......wait......?? 😄

@salsavillo9146 2 месяца назад

How did it go, now that it's been over a year

@benjaminmazanka4354 Год назад

Nice Cappucino🤣🤣

@RedRoofGarage Год назад

🤦‍♂️ I've been using Liqui Moly in my 944 and never realized that they had a oil change sticker right on the bottle 😂 genius

@theanimeotaku2794 Год назад

Wouldn't it be worth checking the head gasket though if it was that it might be I think

@raccoonnn Год назад

Really not the subject of the video but nice wheels, what is the make/model?

@scootbilly Год назад

Currently have the forbidden chocolate milk in my mk5 r32, head gasket failed

@HumbleMechanic Год назад

Wow! That’s super rare!

@jacksontint Год назад

Are we gonna hear more about that mk1 tt from a while back? there was an engine build video a while back but I don't think there was anything else after that.

@HumbleMechanic Год назад

Im not going to put any videos out until the car is done. Then im gonna sell it.

@jacksontint Год назад

@@HumbleMechanic Thanks for the reply! I'm excited to see the results I recently bought a mk1 tt and am fixing it up myself. Maybe your videos will give me inspiration for what I should do to mine in the future. Keep up the great work you are one of my favorite car RU-vidrs especially due to your focus on VAG cars, and thorough but fun explanations of how to do even the trickiest repairs.🤩

@francisdiy1 Год назад

An alternative I learned from growing up on the farm fill the engine all the way up with diesel instead of oil and leave the cap open overnight and Then drain it What I mean by all the way up is literally all the way up to the cap and do not start the engine like that

@jonathonlacey3833 Год назад

It would be good to mention that the other 4 bolts for the oil cooler (besides the one that goes into the pan) are aluminum and will break the head off extremely easily if they are over torqued.

@sursomsatan1225 Год назад

Could you quantify how good it would be?

@corndogko1661 Год назад

I feel that if you don't check every other possibility before the headgasket.. its gonna be the headgasket 100%. Idk why

@Youcallthesebagels_ Год назад

Charles I just noticed you sound a lot like Conan O’Brien lol 😂

@walterbutscher8438 Год назад

260,000 miles. Even if it doesn't work that car owes the owner nothing. Let's hope it does work. Hope you do a follow up.

@HumbleMechanic Год назад

Agree. Not sure how old this one is.

@JamesSalomon947 Год назад

How reasonable is it to work ob Audi cars? I'm planning on purchasing a 2017 - 2018 RS7 or S8 and would like to do some of the maintenence on my own

@HumbleMechanic Год назад

Basic maintenance can be challenging on the RS cars. Not hard, but not super easy. Look up some diys on it before starting

@ashourtalia7016 Год назад

Can the coolant passages inside the PCV valve be plugged up to avoid coolant intrusion?

@HumbleMechanic Год назад

You’d have to reroute coolant I’d assume

@youtubeaccount7137 Год назад

Why does my toyota not make the same choclate mix?

@Niksan49 Год назад

Is it more worth to upgrade the pcv system than putting oem parts

@HumbleMechanic Год назад

Great question. I didn't really search too deep for a PCV upgrade. But if there is one, probs worth it

@Nipplator99999999999 Год назад

I have a question that stumps me, how and why is your oil and the water smoothly mixing without re-identifying as frothy milk or curd chunks blocking the internal jacket and heater core?

@HumbleMechanic Год назад

it won't in the HC because there was no oil in the coolant, it was coolant in the oil. But Im with ya, it was like permanently mixed.

@Nipplator99999999999 Год назад

@@HumbleMechanic thanks sorry I missed the part about it being a one way breech, but I had to look at the oil again because it looked like fuel flooded past the piston rings, but even that was a better viscosity than fuel logged oil. I am also having a bit of difficulty with trying to figure out how it could happen with modern management and intact block, but I really want to know what caused it to blend as well as it was.

@lucasfunkgametop6453 Год назад

Top

@wandameadows5736 Год назад

I think the engine will be fine if you flush it out good enough. Modern engines can take a lot of abuse & continue working. I think it being slightly older has helped it.

@literallyalwaysthejews5397 Год назад

I worked in fire sprinklers a while as a younger guy since my step dad owned a plumbing company. Engineers loved to try and shove steel sprinkler pipes through steel HVAC ducting all the time. Looks good on paper right? It would be a great world if every piece of machinery had to be disassembled and put back together by the engineers before it goes into production.

@82_KID Год назад

4:27 Cranking sounds good so that’s a good sign….