Can we Save This Building? (Bollard installation) 

Well done Rockstar! great follow up to show they are still holding up just fine!

Watching from Louisiana. I learn so much from watching your videos. I really like how technical you get and how "this is what you do" real world view.

Watched the video where you quoted it. Congrats on earning the work.

Nice. Glad you showed how it was holding up months later. I have the yellow paint of shame on the right rear quarter of my F150

6:17 Yeeeez, be carefull Anthony those machines will rip your arm off. You are supposed to bolt the machine down in the concrete with fasterners so that it can not come loose. I wish you all the best :)

If you're coring through the core should pull right out without breaking it up. Drill a 1/4" hole for a concrete screw and bolt a lifting eye to them.

Fantastic video and work as always and love how you explain things they are looking good 👍👍

I know its different everywhere but Home Depot in Ohio requires us to use 6” pole. They want them 3 feet in 5 feet out and a 24x24 square cut around bottom. I unfortunately have set more bollards than I ever want to think about. I’ve seen engineer drawings for these in parking lots that want some crazy stuff that is way overkill. For what you did here its perfect for that lot in my opinion.

Great video , keep them coming

nice move on the hole cutter LOLLLL! - Evan

The Milwaukee core drill is worth every penny

Welcome to the rocky mountains, boss man.

Middle of nowhere: Car in middle of nowhere: "Oh look a building"

Hey Anthony, thanks for the video!

😂😂😂 them RU-vid engineers. Shit that will work perfect. Not enough runway to get going to fast lol

Making all this RU-vid bucks!!! Good job.

Watching from a van , down by the river .

Morning brothers and sisters in the welding world

Stay hard brother

🤣🤣🤣Like i have been saying all along jack of all trades master of none....I have bore drilled hundreds 🙃🙃 looks like it .

3:08 Not even a Tank would get into that building LMFAO

A couple things I do is run a couple string lines. One to make all of the tops level, and one to make them all in a straight line. It looks like you just butted them up against the sidewalk which works. Unfortunately they approved using a smaller size. It looks like shit having different sizes, but not on your part. Stay safe!

Watching from Detroit

You always show and explain everything clearly most guys run their mouths on a bunch of nothing for up to 30mins telling how successful they're and say nothing really about the job thanks for the video bro but one other thing you keep telling the nay sayers to do something that's physically impossible can you demonstrate it to them hey have fun friend always like you videos

Watching from Pennsylvania

Cement is the phucking binder. It's concrete! 😮😊 Poured wall guy here. Northern Michigan

Carry a can of Great Stuff to fill those gaps

Nice job Anthony. ;)

Random question. Did you ever figure out that rockmount airless gouging rod? I had the same issues you did initially. And the rockmount rep I demoed with was worthless.

What’s your favorite brand of 7018 and 6010 I’m very curious ?

You gotta dig 17’ deep 😂😂

seriously, try dry packing the bag mix. just pour it in the hole dry and pack it in with a heavy bar as you go.. if the ground is damp, the conc' will go off fine. If the ground is realy dry, put some water in the hole first. . Four big advantages. the conc' will pack the surrounding ground. the conc will pack down realy hard you can adjust for plumb as you pack down. Stong and stable straight away, even stronger tomorrow. . wet to top inch or so, so you can make it look finished. . This comes up way stronger than you might expect. . Try this dry packing at your place, compared to wet poured ..... be sure to make the vid .... you can have this one for free.

Watching from az, we have a multitude of contractor's licenses from strait welding, fencing, handrails decorative metal etc. Do you have that same issue in FL or MT? If so did u get them all or?

I know hearing protection is an after thought but hopefully you wore some.

Well that's weird cause here in Boston they have things that are called codes only reason I'm saying at least when you put these in front of gas meters minimum 48 inches below and above grade .I don't remember spacing but please people look up what your city's bullshit code is trust me took me forever same shit my holes full of rocks took forever to do 8 of them

You need a vacuum stand for the core drill

nice hat

Wheres the Rapid Set, 2500 PSI in an hour, 9000 PSI in 24 hours.

your not in Kansas anymore Anthony....

Where did you get that hat?

Those won’t stop a golf cart. Ripping the town off you just moved to not a good start..

sexy hat mate