Тёмный
No video :(

Capra UTB18 with Furitek Brushless Power! 

2FM RC
Подписаться 29 тыс.
Просмотров 12 тыс.
50% 1

Checking out some Furitek in the Capra UTB18!
Motor and esc available here
furitek.com/pr...
Don’t forget 2fmrc at checkout for a discount at Furitek!
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Micro Komodo with mount for Trx4m here
furitek.com/pr...
Furitek stinger combo for TRX4M here
furitek.com/pr...
Furitek lizard ultimate here
furitek.com/se...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.c...
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CcTUCN
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.c...
Amazon affiliate link
amzn.to/3aY2lK7
RCAWD affiliate link here
rcawd.com/?ref...
FMS High Speed motor found here
shrsl.com/3qqab
FMS Heatsink for motor here
shrsl.com/3qsew
Samix wheel hex available here
Injora Wheel nuts found here
www.injora.com...
Metal gear diff found here
shrsl.com/3qo0v
HELP SUPPORT the channel by clicking my affiliate links below to amainhobbies or amazon and then shopping at no extra cost to you!
Thanks for any help!
Fcx24 Front Portal axles found here
shrsl.com/3ma33
FCX24 Rear Portal Axles found here
shrsl.com/3ma3h
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/i...
Contact me at 2fastmattracing@gmail.com
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
High clearance links used found here
amzn.to/3NfOJaj
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora 64mm Hyrax
amzn.to/3fmOShr
Power Hobby Trail Warriors found here
www.powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price (agfrc)
amzn.to/3xJbb7r
Another great BUDGET servo here (Emax)
bit.ly/2SjZXUx
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
My favorite BRUSHED motor here
www.ebay.com/i...

Опубликовано:

 

10 дек 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 72   
@kennethrobinson9008
@kennethrobinson9008 Год назад
Matt! Please, this buggy needs some love. This “scale” is awesome. My terrain in Utah is crazy good for this platform.
@mikerainey3847
@mikerainey3847 Год назад
I am really liking mine. It's pretty dang capable out of the box. I see a lot of potential here. That furitek set up looks great!
@thejeepinrealtor5742
@thejeepinrealtor5742 Год назад
If interested in one of these don’t be dissuaded - they’re great. It’s a fun size and great value. People that have been into RC crawlers for years are likely a bit tired of the design style. But don’t let that affect your opinion if new. There is a reason this style continues to be produced. :)
@ChuckBradfordPhotography
@ChuckBradfordPhotography 11 месяцев назад
100% agree, this scale is very good, very portable, but just big enough to crawl well.
@dantrivett8435
@dantrivett8435 2 месяца назад
Regardless of the money I have spent on other scales UTB 18 (ultimate trail buggy 18 ) is a good rig. Trails better than 24 scale and is more fun indoors than 10 scale .
@scottmichael7178
@scottmichael7178 Год назад
Im in the middle of building mine. Just saw this and got the furry system for it. Also got smaller 1/10 portal axles to widen it out a little, about 15 mm per side, higher servo and some 1.9 beadlocks and tires, making custom links to make the w.b. a little longer as well. I cant wait to see how it comes out🤘
@liammcgeath6665
@liammcgeath6665 Год назад
this is awesome, i cant wait to get my hands on one and do this mod its exactly what ive been waiting for. Im happy they made it a bigger sise vs scx24 sised, it means a comeback to 1.9 mini sised performance crawlers like the losi mini crawler and the ecx temper
@ezekielmcginn9706
@ezekielmcginn9706 Год назад
First of, definitely agree, the stock system isn't great. Particularly at it's price point. But a cheaper option is the hobbywing 1080 with a dumborc receiver and transmitter combo. It is about 85 bucks on Amazon and completely transforms the buggy. It's not as good as the furitek, but it's very smooth, very quiet, and about 1/3 to half of the price depending on whether or not you need a new radio and receiver. Just another option for those of us with a bit tighter budget
@2fmrc
@2fmrc Год назад
Yep! I’ve ran the 1080 in a lot of trucks. Very good budget system for sure!
@VinceIrie
@VinceIrie Год назад
I really like the stock system :D I will also upgrade over time but for now I am having a blast!
@FlailinMonkey
@FlailinMonkey Год назад
I'm not interested in this truck, I would have loved to see this truck as an actual 1/18 scale. The Furitek gear seems really great and the price seems reasonable for the quality.. Loving the quality content.
@jasonbecker4997
@jasonbecker4997 Год назад
I’m with you on this truck. Having a 1/10 Capra I just don’t see using one just barely smaller. Would be a good start for someone who isn’t sure about getting into crawling. 1/10 is more expensive and 1/24 isn’t very capable, out of the box at least. That Fox livery is sharp looking though.
@2fmrc
@2fmrc Год назад
That’s my exact complaint with this truck. If it had been true 1/18 I’d be loving it! I think axial really missed the mark with the size of it.
@texomarc
@texomarc Год назад
@@2fmrc What about that new injora buggy?
@2fmrc
@2fmrc Год назад
@@texomarc the one that looks like a Capra style cage?
@texomarc
@texomarc Год назад
@@2fmrc Yessir. The one that’s like a middle finger to axial saying this is what you should have made. I want one just for that reason. Lol.
@MauzyrockRC
@MauzyrockRC Год назад
I just did the change over! Boy what a difference. I followed your video for tips. Cheers!
@aaronscott2278
@aaronscott2278 Год назад
Wow amazing rig you been making me want to try and save up and get a new rc been a few years since I've been able to buy one almost at 13k subs the channel has came so far!! Seriously appreciate all you do for the community 🙏 🔥
@Thepreppersbunkeroutdoors
@Thepreppersbunkeroutdoors Год назад
Seeing your tuning makes me so excited to get my cayman going
@LargeeeScaleLife
@LargeeeScaleLife 10 месяцев назад
dude, I am such a Capra fan boy it’s actually scary. I’m sure they will fall out of fashion and I’ll still be running one lol.
@Frumundaair
@Frumundaair Год назад
Sweet video, where are they giving away the 1/10 capra ? Havent seen much movement in price at all.
@richardfleming9243
@richardfleming9243 Год назад
Love mine hate electronics but got to wait for upgrades on the stuff will snap
@nick_stag
@nick_stag Год назад
i really wanna see this with the overdrive gears please
@prob6999
@prob6999 Год назад
Sweet man. I haven’t touched my trx4m in a few weeks aswell since I got it on the first day with no low crawl gears. Still gotta wait a couple weeks to even get them but not having the ability to rock crawl with it really bums me out. I still love the look of it though
@2fmrc
@2fmrc Год назад
Yeah the stock gearing is lacking a bit when it comes to crawling. Hopefully you’ll get the crawl gears soon!
@christoflord1
@christoflord1 Год назад
So I'm going to do this... I have a gt5 tx but do all flysky rx work with every tx ? I want the lights to work etc but I'm new to this and don't want to waste any money.... can you help me out with some advice ?
@Eddy_zilla
@Eddy_zilla Год назад
I can’t get mine to run right unfortunately, I got the same set up but the esc seems to be glitchy i dunno why had to run it with castle esc instead 🤷🏻
@originalkontrol
@originalkontrol Год назад
Hope they sell this motor separately at some point. I briefly used the original 1400kv Komodo, with a hack for a 3.17 mm pinion, but switched to a V2 Holmes 380 revolver and a Lizard 10 ESC. Love Furitek stuff. Works great, but that Revolver is soooooo loud.
@rc.remedy
@rc.remedy Год назад
Gotta love the Furitek, problem solved! That ride height though..
@2fmrc
@2fmrc Год назад
Yeah if I actually start using this thing it’ll need some work 😆
@bladeaddison3189
@bladeaddison3189 Год назад
I kinda dig it. Hearing a lot of aftermarket performance upgrades are in the works?
@Andr31982
@Andr31982 Год назад
Im really impressed with how that thing moves with that tiny motor! How warm does the motor get?
@SnapperHeadUnlimited
@SnapperHeadUnlimited Год назад
Looking forward to more TRX4M & Capra 1/18 content!!
@greggrube2948
@greggrube2948 Год назад
Love the furitec, it really woke that Capra up
@ericwagner3223
@ericwagner3223 Год назад
Ouch! Definitely not the enthusiasm Cape Crawlers had for his. I’ve never bought an Rc thinking I didn’t want to invest any more money in it. I simply won’t buy it. The ESC is a disappointment to some degree. I wonder if a HW1080 would be a good half step up in performance?
@Les_Burris
@Les_Burris Год назад
Super unhappy with the Furitek system in my UTB18, the transition between the low-speed FOC and normal speed is harsh and jerky. The thing stalls out under load any time the tire gets bound up. Updated firmware and have spent probably 2 hours messing with settings and it still makes no difference. Also, don't believe the perfect 5 star rating they have, they sent an email asking for a review, I left a 3 star review and it says it is pending, they won't publish it, submitted it a few times now. The funny thing is that I have seen a 5 star review show up after I submitted my 3 star.
@redpot6684
@redpot6684 Год назад
What happened to the original upload?
@2fmrc
@2fmrc Год назад
I had mentioned in the original upload that the mounting for this motor didn’t work well. I then got word from Furitek that mine was a prototype and the production units would come with a better mount so I edited that part out since it hadn’t been up but a few mins.
@zachwest6940
@zachwest6940 Год назад
Wish there was a waterproof option
@wootwootjr
@wootwootjr Год назад
How would you compare this motor to the holmes 380 revolver in terms of performance?
@ChuckBradfordPhotography
@ChuckBradfordPhotography 11 месяцев назад
It's funny as you are talking about how poorly the system works, in the video the rig is working so well, crawling the course with ease and composure.
@2fmrc
@2fmrc 11 месяцев назад
Watch closely how it starts/stops constantly and lunges over things at times. You can be half way smooth with the stock setup but you aren’t gonna get a constant slow/smooth crawl. Then watch the Furitek system just continue a nice slow crawl over the course. It don’t show a ton here but when in those tight spots and lots of pressure on a tire that’s when you need to be able to get that nice slow creep without lunging off the edge of a rock.
@Guden79
@Guden79 Год назад
cheaper than the lizard ultimate, but the same specs? Ok, not waterproof, but i don't need that... Think about running this in my TRX-4M. Any points against doing this?
@midwestern_rc
@midwestern_rc Год назад
Furitek has a different system for the TRX4M it’s really impressive
@daylightdies7194
@daylightdies7194 6 месяцев назад
So it’s not worth the £225 axial are asking is what I’m seeing i’m grateful for this video because I was thinking of grabbing one but now I’ll pass
@rcjoe406
@rcjoe406 Год назад
The stock system and tires are a joke but ahhh rtr so I'm ok but the drag brake is not inexistence and the slow crawl is jumpy ...I guess a 1080esc would help alot I don't have 120 for every 24 18 scale truck I'm trying to upgrade 😉 I'm a brushed guy in crawler trucks anyway..I feel like they don't make a cheap brushed option for the scx24 so u have to spend more than the truck costs for electronics I get it its business but 25 brushless motor but the esc is 100 come on man lol
@JesseFlannery
@JesseFlannery Год назад
Why do you need a new receiver to install it?
@2fmrc
@2fmrc Год назад
The esc is an all in one esc/receiver combo in the stock truck. You may be able to use the stock receiver and bypass the esc idk? I didn’t even look honestly. I wanted to get rid of the spektrum stuff and use my flysky since all of my RCs on Flysky transmitters.
@JesseFlannery
@JesseFlannery Год назад
@@2fmrc thanks!
@meegssan5716
@meegssan5716 Год назад
dude thanks for this review, the stock slow crawl, the size, thats a no go for me. Just like you i dumped a lot of money in the 24.
@myboostedtsi
@myboostedtsi Год назад
Anyone having issues with the furitek discount code? Says invalid for me.
@2fmrc
@2fmrc Год назад
For some reason it won’t work on the Furitekusa site if you’re on it. I can’t get them to give a discount for it.
@myboostedtsi
@myboostedtsi Год назад
Well damn, thanks for the reply.
@heavymetalrc7520
@heavymetalrc7520 Год назад
I have never been so uninterested in a rc lol. But nice to see that furitek smoothness.
@2fmrc
@2fmrc Год назад
Kinda the same here. It’s like I have it and I would like to run it because I paid $250 for it but I really don’t care if I run it or not 😆
@heavymetalrc7520
@heavymetalrc7520 Год назад
@@2fmrc 😆 I know exactly what you mean.
@giopirmisashvili5514
@giopirmisashvili5514 5 месяцев назад
😊
@Fun-under-the-hood
@Fun-under-the-hood Год назад
i can't even find a capra for sale used haha. anyway. ya that slow crawl sucks😩
@mikemangiameli561
@mikemangiameli561 Год назад
Help where can I get crawler gears for the trx4m
@2fmrc
@2fmrc Год назад
Kinda hard to come by. I got mine at the hobby shop closest to me. I bought a couple sets the day they released because I figured the stuff would be hard to get.
@mikemangiameli561
@mikemangiameli561 Год назад
Yep my hobby store was out and the defender is not very good with the stock gearing.
@2fmrc
@2fmrc Год назад
@@mikemangiameli561 yeah it’s a little rough on stock gearing for sure. My defender still has stock in it.
@mikemangiameli561
@mikemangiameli561 Год назад
@@2fmrc it's fast but not a climbing machine. 😂 Lol. For stocking stuffers bought the wife and I weighed rims and a bunch of brass should make things better.
@willgeorge6909
@willgeorge6909 Год назад
Are you a fan of anything????
@2fmrc
@2fmrc Год назад
Only if it’s good 🤷🏻‍♂️
@mikerainey3847
@mikerainey3847 Год назад
Hey Matt any thouguts on 1.55 tire upgrade? No more than 4"-4.25"??
@mikerainey3847
@mikerainey3847 Год назад
Not sure what thouguts are but if ya' got em' I want em' and your thoughts too!
@carloshnunez
@carloshnunez Год назад
Very nice 🔵🔵🔵👍👍👍🙂🙂🙂🔵🔵🔵
@tylerbowen290
@tylerbowen290 Год назад
Dude how many times are you gonna say the same sentence?!?!? We get it you didn't wanna upgrade it but hey bud it's a stock RC, every stock RC needs upgrades. It's part of RC living, factory always put cheap parts on to force you to upgrade. I knew that with my very first RC
@2fmrc
@2fmrc Год назад
Haha! It happens. Shoot a few videos and you’ll find all of your sort of nervous ticks or find that you repeat yourself too much. Sometimes you just leave it without editing it out because it’s too much work to reshoot etc. People think it’s all easy. Turn the camera on and shoot a vid but it’s a lot to deal with. Then EVERYONE wants to point out your flaws. Gotta love the negative comments & hopefully they’ll make you better or you can’t survive in it long that’s for sure 🤘
@aftermathmotomxrc
@aftermathmotomxrc Год назад
NEW SUB..... how bout a little scratch on my back... right in the center....not to low. Thank you for the video. Yours Truly Mr. AftermathmotoMXRC
Далее
AX24 goes Brushless with MofoRC ROP Motor?
14:35
Просмотров 11 тыс.
Axial Capra UTB18 Upgrades! Axial, Reefs, Spec RC!
13:14
Gli occhiali da sole non mi hanno coperto! 😎
00:13
I Built a Transparent Boomerang (it's lethal)
13:10
Просмотров 3,6 млн
FCX24 with MofoRC Big Block motor upgrade?
15:55
Просмотров 6 тыс.
Utb18 7075 Mods by Vitavon
13:06
Просмотров 10 тыс.
Furitek Python vs Spektrum Firma Micro? No contest!
10:16
Axial UTB18 Capra Upgrade Time Tires and Testing
11:38