Тёмный
No video :(

CAR BODY REPAIR | BIG DENT FIXED WITH PAINTLESS DENT REMOVAL | PDR UK 

Dent-Remover
Подписаться 59 тыс.
Просмотров 26 тыс.
50% 1

Massive Dent Repair on a MGZS EV (Electric Vehicle)
In this video I show you how I repaired this big dent using only PDR and GPR methods.
This is the correct way to repair minor dents on Electric Vehicles because there’s no welding involved such as welding tags and pins to pull the damage out…. Instead we use hot glue and rods to pull and push the damage out without affecting any of the electrical components or removing the paint…..
Also in this video I answer your comments specifically regarding the tools that I use, I’ve labelled each one during the video, Thank you for your comments and I hope this helps!
Note:
I'm not endorsed or paid to promote any of these tools in this video (23.12.22)
Join this channel to get access to perks:
/ @dentremover01
----------------------------------------------
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
------ Chapters------
00:00 The dent
00:28 Explaining the damage
02:36 Your comments answered
02:50 The first pull with GPR
04:56 Inspect the damage
06:27 Using Knockdowns on the crowns
07:27 Analysis of the repair so far
08:03 Glue pulling the bulk
08:26 Using PDR tools
10:43 Return to glue pulling!
12:29 Fine tuning / Sharp tools
13:31 Thanks for watching
13:49 Finished results!
14:25 End screen
---------------
Filmed by Alastair Robertson… Thanks mate!
Repaired & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
Martin
#pdr #collision #youtubevideo #gluepullrepairuk #myrepair #EVdentrepair #DentRemoverBeverley #GPR #camautopro #vehiclerefinishing #autobodyrepair #PaintlessDentRemoval #youtubedentvideo #autocollisionrepair #EastSide #ThoseDentGuys #DentRepair #cardetailer #automobile #repairShop #DentRepairUk #PdrVideos #MobileDentTechnician #imiCertified #dentVid #pdrTech #pdrTechnician #HullDents #DentsHull #IMI #HullDent #CityOfCulture2017 #MartinSadler #kecoUK

Опубликовано:

 

18 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 119   
@1st_track_dents
@1st_track_dents Год назад
Looked like that one was fighting back a bit Martin, but you kept your cool and got the better of it! Cracking job as always! 😉
@dentremover01
@dentremover01 Год назад
Thanks Jake! Yeah just a bit! You could tell by the tone of my voice and my moaning lol!!!
@dingking7577
@dingking7577 Год назад
Jake, GREAT TO SEE U ON HERE! Hope all is well! Happy Christmas to you and yours!
@1st_track_dents
@1st_track_dents Год назад
@@dingking7577 I'm good thanks, Merry Christmas to you and yours too! 👍
@wjones6606
@wjones6606 4 месяца назад
Hi Martin, Wonderful work, you did look a bit fed up on that one..! Love watching your channel, i find it very calming to watch, and learn at the same time. I have a classic car collection of approx twenty vehicles, i am tempted to buy some tools and have a go at a few car park dings....
@dentremover01
@dentremover01 4 месяца назад
Hi W Jones Thank you and yes that MG was horrible to repair!! Such a chewy- plastic feel to the metal but I think I got it! I’m very happy you enjoy the channel! And learn also. Regards trying this, I would definitely try a small course first. You may damage your car and it end up costing you a lot more in re working or ruining a classic and wishing you hadn’t tried it.
@dingking7577
@dingking7577 Год назад
After watching this again Martin I have to say this is moved from PDR to PCR (PAINTLESS COLLISION REPAIR). AGAIN BEAUTIFUL JOB!
@dentremover01
@dentremover01 Год назад
Hey Tommy! Thank you! I never thought of that! Could be a new part of the industry like GPR! PCR you heard it here first! 🙌🏼
@kielerjim
@kielerjim Год назад
Hey.... you are the first dent guy I've seen wearing nitrile gloves!!! Good life saving choice!
@dentremover01
@dentremover01 Год назад
Thanks Jim! I try to wear them as much as I can, because the acetone/isopropyl messes my hands up and goes all horrible ! Thanks for watching Martin
@NigeUK007
@NigeUK007 Год назад
Excellent video and well explained as always in terms of tools and approach. A real game of patience. Watching totally banjaxed panels get fixed, oddly, is very therapeutic to watch. Very happy customer there. Happy Christmas.
@dentremover01
@dentremover01 Год назад
Thank You Nigel for your great comment. It was a brain teaser and took a while so I needed patience! End results are great though and satisfaction Merry Christmas Martin
@billseay6399
@billseay6399 2 месяца назад
Martin your the man
@dentremover01
@dentremover01 2 месяца назад
Thank you so much for your support Bill!
@billseay6399
@billseay6399 2 месяца назад
@@dentremover01 you bet!
@kevinborden2477
@kevinborden2477 Год назад
Excellent work Martin. This looked like a very technical dent. As always, you got it done. Thank you for sharing these repairs. 👍
@dentremover01
@dentremover01 Год назад
Thank you Kevin your comment is much appreciated Il keep sharing as much as I can 🙌🏼
@dingking7577
@dingking7577 Год назад
Nasty damage is right, MERRY CHRISTMAS MY FRIEND! See you and G next month!
@dentremover01
@dentremover01 Год назад
Merry Christmas to you, Jamie and family and really looking forward to catching up with you guys ! Il get first round!
@DentZero123
@DentZero123 Год назад
Once again Martin my friend you nailed it
@dentremover01
@dentremover01 Год назад
Thanks Bobby! See you in a month 🍺
@DentZero123
@DentZero123 Год назад
@@dentremover01 Absolutely brother
@LxGL82
@LxGL82 Год назад
Красавчик, ничего не скажешь! 🤝
@dentremover01
@dentremover01 Год назад
🤐
@karolalbin
@karolalbin Год назад
That was a tough one Martin. Great job and moaning is a normal thing in jobs like this. Sometimes I have to take a break for longer to come back to repair so thumbs up for that job! Excellent!
@dentremover01
@dentremover01 Год назад
Hi Karol thanks for your comment, I don’t get many jobs where I’m struggling like that one! It just wouldn’t repair! I got there in the end and my customer was very happy so that’s the main thing. I agree sometimes it’s best to walk away and come back to a job Thanks again Martin
@karolalbin
@karolalbin Год назад
Satisfaction when customer is happy giving something special ☺️
@dentremover01
@dentremover01 Год назад
Yes that’s the best part!
@sanyachanal1610
@sanyachanal1610 Год назад
คุณเก่งมากครับ ผมอยากเก่งเหมือนคุณแต่อุปกรณ์ของผมไม่มีเหมือนของคุณ
@dentremover01
@dentremover01 Год назад
Hi Sanyachanal I hope I have the correct language (Hindi) आपकी टिप्पणी के लिए धन्यवाद। बढ़िया मरम्मत करने में सक्षम होने के लिए आपको सभी नवीनतम उपकरणों की आवश्यकता नहीं है। मुझे आशा है कि आप जो करते हैं उसका आनंद लेंगे और उसमें लगे रहेंगे। मुझे यह भी आशा है कि आपको भविष्य में और अधिक उपकरण मिल सकेंगे
@jamesmarques7245
@jamesmarques7245 Год назад
Awesome sauce, it takes a lot of patience. I have used glue pulling on aluminum panels works great. Pulled it out enough to do body work and paint.
@dentremover01
@dentremover01 Год назад
Hi James thanks for your comment… yes Glue pulling or GPR as it’s more commonly known now is ideal for Ali, because the welding pin pullers are difficult to use (my experience 15 yrs ago) and glue is a lot faster and better for the repair…. You never know you may repair it to an acceptable standard with practice and not have to re paint Have a great Christmas
@robertmassmann228
@robertmassmann228 11 месяцев назад
Thank you showing us how to complete these type of repairs. I just acquired an Airstream travel trailer that need many dents repaired hail and accident damage. Tools are coming in a couple of days and we will see how it goes.
@dentremover01
@dentremover01 6 месяцев назад
I love those airstreams! Good luck I hope you sorted it out
@robertmassmann228
@robertmassmann228 6 месяцев назад
I have been able to remove most of the bigger dents out, but still need the refine my techniques to remove the damage completely.
@robertcampbell5485
@robertcampbell5485 3 месяца назад
Wave and ripple city I bet
@angelodagnolo984
@angelodagnolo984 Год назад
You sir..... Are the dogs nuts, awesome work! 👌
@dentremover01
@dentremover01 Год назад
Wow thank you Angelo I really appreciate your kind words Merry Christmas and happy new year 🥳
@naveedhashmi4897
@naveedhashmi4897 Год назад
fantastic job very impressive
@dentremover01
@dentremover01 Год назад
Thank you Naveed 🙌🏼
@user-gs9id2cy2z
@user-gs9id2cy2z 10 месяцев назад
What magnificent work and attention to detail, many thanks for the video.
@dentremover01
@dentremover01 9 месяцев назад
Thank you very much
@levik12
@levik12 Год назад
This should have been a door skin replacement! Job well done!!!👍🏻
@dentremover01
@dentremover01 Год назад
Yup I agree! I hated repairing this!! Skins are not so popular these days, I fitted a lot in my time and to get that seal and paint on the edges can be hard. Better a new door or a repair and paint….. but I saved it “just” and my customer was super happy ! Thanks for your kind words
@juanmarcelobohos638
@juanmarcelobohos638 Год назад
Valued, friend!
@dentremover01
@dentremover01 Год назад
Thank you Juan and merry Christmas
@davitimekhrishvili3049
@davitimekhrishvili3049 Год назад
Круто...Завидую мастерству...Martin you are very cool!!!
@dentremover01
@dentremover01 Год назад
Thank you Daviti very kind of you. 🙌🏼
@TheHelado36
@TheHelado36 Год назад
This guy is amazing !
@reginaldomartelinho6204
@reginaldomartelinho6204 Год назад
excellent explain for techniques and tools, 👏👏👏
@dentremover01
@dentremover01 Год назад
Thank you 🙌🏼
@frankpavan7865
@frankpavan7865 Год назад
Great work. The lift which brings the vehicle to eye level must help a great deal in doing these lower door dents. Merry Christmas to you and yours from 🇨🇦
@dentremover01
@dentremover01 Год назад
Hi Frank yes 100% that’s the main reason I got it, my knees where getting bad while I was a mobile repairer and I knew I had to get a place out of the weather elements and a ramp! Merry Christmas 🎅
@frankpavan7865
@frankpavan7865 Год назад
@@dentremover01 yes. I understand. Thanks.
@kirkpullin9302
@kirkpullin9302 11 месяцев назад
Great repair Martin 👏🏽
@dentremover01
@dentremover01 6 месяцев назад
Hey Kirk! Thanks! I hated that repair!
@salahelahmar6151
@salahelahmar6151 Год назад
Love your videos, Martin Thanks for sharing
@dentremover01
@dentremover01 Год назад
Thank you Salah very kind of you 🙏
@andrewstopper7119
@andrewstopper7119 Год назад
Well done Martin Those panels are really soft
@dentremover01
@dentremover01 Год назад
100%! Those panels and Hyundais are not nice to fix!
@darrenhughes4207
@darrenhughes4207 Год назад
Good job Martin it’s Darren from the keco open
@dentremover01
@dentremover01 Год назад
Hey Darren! Glad you enjoyed the repair….. see you at the next open day?
@etiennelantuit7845
@etiennelantuit7845 Год назад
Great job as always!
@dentremover01
@dentremover01 Год назад
Thank you Etienne happy new year 🙌🏼
@SalvageMasterEssex
@SalvageMasterEssex Год назад
Definitely looked a job from hell but excellent result. Hope you and your family have a Merry Christmas and Happy New year 👍👍
@dentremover01
@dentremover01 Год назад
Thanks Corey! Yea glad to have finished that one! Have a great Christmas 🙌🏼
@pepehernandez1232
@pepehernandez1232 Год назад
good shape good job 👍👍👍👍👍 🇲🇽🇲🇽🇺🇲🇺🇲👏👏👏👏👏👍👍👍
@jamesward5721
@jamesward5721 Год назад
Nice one Martin - there's another repair where a lateral pulling rig would be dead handy & speed things up a lot for you.
@dentremover01
@dentremover01 Год назад
Hi James thanks for your comment, I’ve seen the technique but not had the chance to try it out I’ve always managed
@jamesward5721
@jamesward5721 Год назад
@@dentremover01 I'd no idea what it was, but once you get shown it in action, it's one of them "Ohh Yeah!" moments - just makes loads of sense. :-)
@markgoscinski3509
@markgoscinski3509 Год назад
Absolutely amazing work
@dentremover01
@dentremover01 Год назад
Thank you Mark
@selectarasnik7047
@selectarasnik7047 Год назад
Great job as always. I bought a glue kit about a year ago and still haven’t used it as yet lol. Recently got a different car with a few dents here and there which I’m going to tackle when the weather is a bit warmer. 😬🙏
@dentremover01
@dentremover01 Год назад
Thank you! Make sure you take your time with the glue system. If your not sure then stop and call a local tech. It would be a good idea to chat with a local one first anyway just so you don’t make it worse Good luck Martin
@selectarasnik7047
@selectarasnik7047 Год назад
@@dentremover01 thx mate for the advice. will do. 🙏
@billcui7827
@billcui7827 Год назад
Hi Martin if when you use bridge pulling keep half way then blending the crown down easy and quick. pls dont mind that is my experience.
@dentremover01
@dentremover01 Год назад
Hi Bill, yes your right and I do do the technique you mention on most repairs, I just struggled with this repair Thanks for your comment and happy new year!
@oldgitsknowstuff
@oldgitsknowstuff Год назад
I just watched your video. That's a World class job ! I would say 'perfect'. AND if I say say its perfect...you know its right. Good Boy...now, get your hair cut. Merry Christmas Son .
@dentremover01
@dentremover01 Год назад
Thank you very much 🙌🏼
@dentdetailpdr
@dentdetailpdr Год назад
Great video and repair Martin! Horrible dent and not a forgiving paint colour, great work mate
@dentremover01
@dentremover01 Год назад
Thanks Graham!!
@vado08
@vado08 Год назад
Excellent👌
@dentremover01
@dentremover01 Год назад
Thank you Salvador happy new year 🙌🏼
@user-kp6gb5lr5f
@user-kp6gb5lr5f Год назад
Good 🦸‍♂️
@dentremover01
@dentremover01 Год назад
Thank you and merry Christmas
@ajmac996
@ajmac996 Год назад
Another great video Martin,what toils would you recommend for starting pdr and where would you recommend to buy them
@larsy9269
@larsy9269 Год назад
Отличный результат!
@dentremover01
@dentremover01 Год назад
благодарю вас! хорошо в итоге получилось! счастливого Рождества !
@larsy9269
@larsy9269 Год назад
@@dentremover01 Спасибо! И Вас с Рождеством! И хорошего нового года!
@scottpratson7766
@scottpratson7766 10 месяцев назад
Do you think lateral tension on that body line would have helped???
@dentremover01
@dentremover01 10 месяцев назад
Possibly. But I didn’t have the equipment to use at the time
@1973Aj
@1973Aj Год назад
Well done , you have some patience for that one 👍🏻 top job 👌🏻 which slider you using , cheers Andy
@dentremover01
@dentremover01 Год назад
Thanks Andy, it’s called a Pulldog slide hammer and it’s a great 🙌🏼 tool I’ve had it for years
@1973Aj
@1973Aj Год назад
@@dentremover01 Thank you 😊
@1973Aj
@1973Aj Год назад
@@dentremover01 Can’t find that one no one seems to sell it anywhere, have you tried the griffin one ? Cheers
@dougpeirce726
@dougpeirce726 Год назад
Nice work. Curious how the paint will last long term in this area, if adhesion has been compromised and this becomes first place for future rust to occur?
@dentremover01
@dentremover01 Год назад
Hi Doug thanks for your comment. If the paint isn’t compromised then there’s no chance of it going rusty in the future. The paint is fully adhered to the damaged panel and won’t change. If the paint comes away or is compromised then a repaint is the best option to re seal the area with fresh paint. Does this answer your question? Thanks Martin
@dougpeirce726
@dougpeirce726 Год назад
@@dentremover01 I don't know that I agree. The paint has been stretched, stressed because of the dent forming and then metal manipulation to get back to it's initial shape. There has to be some microstructure break down in the paint or loosening of the bound to the substrate. It would be interesting how a salt spray test would perform.
@dentremover01
@dentremover01 Год назад
Hi Doug. I’m 25 years I have never heard of any PDR repair rust after a PDR repair If the paint does stretch then it would crack or micro crack and then maybe your correct- but all the repairs I’ve carried out the paint has been in 100% condition and therefor not compromised. Great indepth comment thank you it’s appreciated
@jackiemay9471
@jackiemay9471 Год назад
nice job how long did it take
@massimo6770
@massimo6770 Год назад
Hi Martin, excellent as always! Just a question: on repainted cars (no filler) is possible doing PDR? Merry Christmas!
@dentremover01
@dentremover01 Год назад
Hi Massimo thanks! Yes sure you can, you just have to go careful and even repaired (filler) panels can be saved but again it’s a very fine line and a steady process Happy christmas mate
@massimo6770
@massimo6770 Год назад
@@dentremover01 👍👍👍
@masoudmontazery907
@masoudmontazery907 Год назад
Good luck...
@dentremover01
@dentremover01 Год назад
Thanks Masoud 🙏
@balljennings
@balljennings 11 месяцев назад
How can I repair a dent which is in the bit that runs under the doors?
@dentremover01
@dentremover01 11 месяцев назад
If it’s the Sill then it may not be repairable with PDR I’d always recommend speaking with a PDR tech first
@balljennings
@balljennings 11 месяцев назад
@@dentremover01 I think its called a rocker panel. Like where a side skirt would be but this car is too basic for that stuff. But I can see that its all one panel which extends up past the fuel flap and onto the roof. So replacing that panel probably wouldn't be worth it. I think it's metal so a panel beater could probably repair it.
@briandentguy3403
@briandentguy3403 Год назад
Well done, that one was definitely time consuming. Too bad those holes were so tiny for that lower trim piece aswell
@dentremover01
@dentremover01 Год назад
Hi Brian thanks for your comment. Yes they could have come in handy but I reckon I’d have messed the holes up. I don’t want another like this that’s for sure!! All the best
@abhilashmohan7522
@abhilashmohan7522 Год назад
Denting job vacancies available?
@dentremover01
@dentremover01 Год назад
Thanks for asking! But not at the moment at Dent Remover hq
@pepehernandez1232
@pepehernandez1232 Год назад
where are you front 👍👍👍👍👍👍🇺🇲🇺🇲🇲🇽🇲🇽
@dentremover01
@dentremover01 Год назад
Hi Pepe! We’re in the Uk 🇬🇧
@illiasvtillias5153
@illiasvtillias5153 Год назад
😀q
@MorindaSilly-rn9dl
@MorindaSilly-rn9dl Год назад
Hey is good work am like it
@MorindaSilly-rn9dl
@MorindaSilly-rn9dl Год назад
Hey is good work am like it
@mashamambea5704
@mashamambea5704 10 месяцев назад
Fske
@dentremover01
@dentremover01 10 месяцев назад
Thanks for your comment, happy to say it’s not, and you spelt Fake wrong!
Далее
Мелл хочешь сына от Дилары
00:50
Просмотров 257 тыс.
НАСТЯ КРАСИВАЯ?? #shorts
00:22
Просмотров 315 тыс.
Pulling to PERFECTION! | Getting Glassed!
12:56
Просмотров 6 млн
When Paintless Dent Removal Goes Wrong! PDR Fail
12:31
Мелл хочешь сына от Дилары
00:50
Просмотров 257 тыс.