Тёмный
No video :(

Car headlight condensation easy fix / DIY leakage test and fix / Car Headlight Fog Fix. 

Dheet Banda
Подписаться 89
Просмотров 17 тыс.
50% 1

In today's video, we are going to discuss a common issue faced by many people all around the world, that is the apperance of Water vapours / Condensation inside car / motorcycle headlight.
It happens usually due to a leaking headlight seal(butyl rubber seal), leaky bulb connector dust cover, broken / cracked headlight body, broken / cracked headlight lens etc. There could be hundreds or even thousands of reasons for water appearing inside a headlight. The most common disadvantage is low light, corrosion inside the headlight, fungus starting to grow etc.
In this video i first tested the headlight of Suzuki Liana(YOP2012) for pressure leaks by using an old fridge compressor(which can be arranged if anyone wants one too).
While doing the pressure test, i made sure that the pressure doesn't exceeds a max pressure of 5 psi as any pressure above that could cause explosing or cracking of the outer headlight housing which would become an expensive and time consuming thing.
After finding out the spot of leakage i then thought of a way to permanently fix the issue. The main thinking was regarding what kind of adhesive should be used for the required purpose, at last super glue(Elfy glue) was selected based on the curing time and availability. The best was to open the headlight by seperating the back casing and the lens(Front cover) and then to apply more butyl glue on the leaky area. But that would have caused mess and was not possible at that time. After applying the Super glue, i waited for almost more than half an hour for the super glue to cure properly before any sort of testing for leakage and fitting it back into the vehicle.
When the headlight was testing for both vaccuum and pressure, it showed that complete vaccuum was being made however i didnt let it reach a vaccuum pressure of -5psi aa anything less than this definitely would have caused the headlights casing to collapse and cause severe damage to the internal structure of the headlight. After i also tested it using Soapy Water for any visible or possible bubbling which may indicate a leak, and Voila! the leak have been fixed.
Kindly ignore the above mentioned tags.
#headlightfix
#headlightfog
#headlightfuse
#headlightfix
#headlightrepair
#headlightmist
#suzukilianaheadlight
#suzuki
#liana
#baleno
#baleno1600ccgti
#balenopakistan
#balenoindia
#suzukiaerio
#aerio
#repairing
#diyrepairing
#diyproject
#newproject
#success
#betterthanbefore
#headlightrestoration
#headlightconversion
#halogenbulb
#h4bulb
#h4bulbdustcover
#headlightventilationtubes

Опубликовано:

 

28 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 9   
@saurabhshah8122
@saurabhshah8122 11 месяцев назад
Best solution for check 👍
@dheetbanda007
@dheetbanda007 11 месяцев назад
Thanks.
@user-mi3yb2yk6s
@user-mi3yb2yk6s 5 месяцев назад
नमस्ते जी, मै महाराष्ट्र में रहता हु. भैय्या मेरी महिन्द्रा tuv300 car की हेडलाईट के उपर पीलापन आ गया है. रात के वकत हेडलाइट का उजाला दुरतक नहीं पडता है जी. यहा पर गैरेज पालीश करके देखा पर कुछ फायदा नहीं हुआ.2016 का model है जी. कुरपया करके बतायेंगे क्या करना पडेगा. हा भाई आपकी विडीयो मै बहुत ही बडीया आसानी से समज आये ऐशी जानकारी दि. भैय्या मुझे आप बतायेगे हेडलाईट पे पिलापन है उस के लिए कया करना पडेगा
@dheetbanda007
@dheetbanda007 5 месяцев назад
Brother kindly type in english.
@swapnilyadav4024
@swapnilyadav4024 17 дней назад
Headlight Ceramic coating krwa lo headlight me..sahi hojayega.
@Nightrider-5000
@Nightrider-5000 11 месяцев назад
Agar light ka shisha crack huwa hai tuo kya repair karsaktey hai ?
@dheetbanda007
@dheetbanda007 11 месяцев назад
Abhi tak mujhay experience to nahi hua hai. laikin haan aik martaba motorbike ka crack hua tha acrylic lens. Uska mainay silicon lagayi thi bilkul bareek si taakay paani naa jaaye light kay andar. Laikin zara si silicon bhi lagi hui nazar aati thi aur thora sa light ki throw may faraq aaya tha. Agar acrylic lens hai matlab plastic ka headlight glass hai to ya phir silicon hi use karo warna agar mazboot kaam karna hai to aap 2 part clear epoxy use karo. Laikin usko headlight par lagatay hi hot air gun ya hair dryer say usko evenly phela dena taakay woh aik jagga par ikatha na rahay
@alamm5432
@alamm5432 22 дня назад
Glue name please ....
@dheetbanda007
@dheetbanda007 22 дня назад
@@alamm5432 You can use any super glue such as Elfy(Pakistan) or Feviquick(india) and other such brands. However it id better to use Butyl Rubber Sealant Glue which is meant to be used for the said purpose.
Далее
나랑 아빠가 아이스크림 먹을 때
00:15
Просмотров 3,7 млн
🛑самое грустное видео
00:10
Просмотров 157 тыс.
BMW 6 Series HOW TO FIX DROWNED HEADLIGHT
8:03
Просмотров 23 тыс.
RAM Projector Headlight Condensation Fog Issue FIX
10:11
BMW Headlights Condensation repair part1
25:51
Просмотров 717 тыс.