Do this NOW to get rid of condensation inside your headlights...

Подписаться 9 тыс.

Просмотров 141 тыс.

50% 1

Have an issue with moisture in your headlights or foglights? Look no further as we have an easy solution that works for ANY car!
We show how to remove condensation from the lights, then use glue to weld the headlight cracks.
Tools We Use Affiliate Links:
Trim Removal Tool Kit:
US: amzn.to/3xV5ens
Canada: amzn.to/3BgVa7d
Bluetooth Coding Adapter:
US: amzn.to/3CdJupz
Canada: amzn.to/3BQcW3k
ENET Cable for coding:
US: amzn.to/3dKqSUz
Canada: amzn.to/3wvYkms
Torx Kit:
US: amzn.to/3Rha9G8
Canada: amzn.to/3HIhMRj
If you have any questions of comments, please leave them in the comments!!
Please make sure to Like and SUBSCRIBE!!
-----------------------------------------------------------------------------------------------------------------------
Some amazing videos from this year:
Unlocking EVERY BimmerCode upgrade on my MINI Cooper!
• Unlocking EVERY Bimmer...
New MINI DIGITAL CLUSTER verses OLD
• New MINI DIGITAL CLUST...
Everything your MINI can do with the NEW connected ENTERTAINMENT SYSTEM!
• Everything your MINI c...
Installing the new MINI DIGITAL CLUSTER
• Installing the new MIN...
UPGRADING to the NEW 2022 Entertainment System...
• UPGRADING to the NEW 2...
DRIVING THE NEW 2022 MINI JCW! - FULL REVIEW
• DRIVING THE NEW 2022 M...
Is the NEW MINI app USEFULL? | Everything you can do with app...
• I Gave MINI Connected ...
-----------------------------------------------------------------------------------------------------------------------
Music by:
Sergius - Galaxy [Bass Rebels Release]
Song - • Sergius - Galaxy [Bass...
Download/Stream - www.bassrebels.co.uk/Galaxy
Follow Sergius - www.bassrebels.co.uk/Sergius
-----------------------------------------------------------------------------------------------------------------------

Авто/Мото

Опубликовано:

21 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@Tylergaming123 Год назад

ive had moisture in my headlights since i bought my e92 9 months ago and didnt even know there were vents on it like that until today, thank you so much dude

@carcreationsyt Год назад

Awesome! Glad you found it helpful! Hope you are able to fix the issue!

@LaChocolatScorpio Год назад

Omg thank u so much! Every other video has way too many steps…this was simple and to the point and got the job done! 🏆🙌🏾💯

@carcreationsyt Год назад

No worries, glad it helped and thanks for watching!!

@CaliforniaOyinbo 4 месяца назад

You rock! Saved all of us hundreds of $$. VERY appreciated!

@carcreationsyt 4 месяца назад

Glad it helped, thanks so much for watching!!

@eliknyazev 2 года назад

Awesome video!! Definitely useful stuff! Great work there!! Keep it up!!!

@carcreationsyt 2 года назад

Thanks so much, will do!

@faithalarcon7020 Год назад

Thank you Great tip

@carcreationsyt Год назад

Thanks for watching!!

@curtcochran1655 Год назад

Works like a charm

@carcreationsyt Год назад

Awesome! Thanks for the feedback!

@motormechanic7318 Год назад

Thank you so much, I final got moisture out of my headlight

@carcreationsyt Год назад

Awesome! Glad you found it helpful!

@darrencottrell5541 2 года назад

Nice solo video Josh. I'd recommend keeping an eye on the surrounding plastics though, hairdryers can still cook or distort plastic/wiring if left in the same area for too long or on too high a setting.

@carcreationsyt 2 года назад

Thanks!! When I tested it a few days before to see what I was dealing with, I removed the hairdryer every few minutes to make sure nothing was melting.

@adrianwilson9667 Год назад

I wish u were in my city...places want to charge me $3000 just to do what u did....here in Kansas city

@lauwe54 3 месяца назад

Thank you great job

@carcreationsyt 2 месяца назад

Thanks so much for watching!

@nofilter2091 2 года назад

nice video, BTW that retro Mach1 shirt is badass 😎

@carcreationsyt 2 года назад

Thanks! I got it when we went to SEMA.

@huseenkeng8714 Год назад

Thank you my dear brother I used a bracelet and the result was good I followed you 🌹

@carcreationsyt Год назад

Good

@linnmariemarkussen6909 Год назад

🙏 I have this problem on one of the headlights on my bmw f21 2012 model. Do you know if this method will work for my car? And can you please wright down the name of the glue you used? Thank you so much!

@running_rich Год назад

Thanks for this video. I have a '17 330i with adaptive LED assembles. I figured there would be no access to drying out the unit, but on top of mine there is a 3" round cap that comes out, that's where I placed the heat gun on low. The lens has a minor crack, but water got in after driving in the rain. After drying out I'll seal the crack with clear epoxy. The first inspection station said I'd fail with a cracked headlight. But after no more condensation and sealing it neatly I'll try some other stations. Fingers crossed, as my new assembly costs over $1,800!

@carcreationsyt Год назад

Thanks for watching! Hope the video helped your situation! New lights are so pricy and then have to be coded!

@running_rich Год назад

@@carcreationsyt Update: Went back to the same inspection station. I explained the situation, no more condensation, neatly sealed. He said "I take care of you." Thanks again!

@dumindasamarawickrama3795 11 месяцев назад

Thanks

@carcreationsyt 11 месяцев назад

Thanks for watching!!

@assettocinematics8768 2 года назад

note if you got halogen lamps just keep high beans on then when hot enaugh just take off rubber seal. Will dry by itself in 5 minutes. Not too sure if projector or LED do the same since heat might be not that high.

@carcreationsyt 2 года назад

That’s a good point! Thanks! Should have included that, unfortunately I don’t think it works for the leds as they don’t get too hot

@StrengthInSpirit 2 года назад

Funny you've released this video as I need to take care of the same problem on one of my tail lights on my F56 mini cooper. The thing I am afraid is this could've done damage to the controller since the light went into safe mode (light is dimmer basically) and is throwing error messages on the dash for the whole module (blinker, reverse light and tail light). Do you think something similar could help fixing it ? By looking into the rear service hatch inside of the car, I've noticed a ton of frozen condensation (on both the left and right side). The temps here in Quebec have been pretty wild with lows in the -30's during the night and into the -10's during the day. I might gonna have to change a couple of seals around the car altogether to fix this around spring.

@carcreationsyt 2 года назад

Perfect timing!! The condensation was messing with the electronics in my lights too. I didn’t mention it in the video but I was getting all sorts of error codes to do with the lights. Drying out the lights helped and all the codes have gone away and not come back since. I think if you gave it a shot that would definitely help. In the spring I also plan on completely pulling both lights out and redoing seals and inspecting for other cracks.

@5.74.3 3 месяца назад

Hi what type of paste/seal is that?

@buddyclem7328 Год назад

Idling indoors? What could go wrong? LOL

@carcreationsyt Год назад

Thanks for the concern! This garage is meant for fixing machines and has a duct system that turns on when the exhaust levels reach a certain value.

@samueldoyon9170 4 месяца назад

Where you buy that glue?

@Louiearevalo 5 месяцев назад

THANK YOU, THANK YOU, THANK YOU!!!

@carcreationsyt 5 месяцев назад

Glad you found it helpful, thanks for watching!

@Andreafoc1 5 месяцев назад

@@carcreationsyt bello quello che hai fatto ti posso chiedere se si può fare anche con i fari a led? Possiedo un BMW 320

@Andreafoc1 5 месяцев назад

@@carcreationsytwhat you did is nice, can I ask you if it can also be done with LED headlights? I own a BMW 320

@carcreationsyt 5 месяцев назад

@@Andreafoc1 thanks! Yes, the ones we are working on here are led.

@jakethomas6085 2 года назад

Car sounds sweet man. I have minor burbles on my straight piped 535xi. Is it a catless downpipe that’s causing your loud burbles and snaps?

@carcreationsyt 2 года назад

Thanks! I’m still catted. The only exhaust mod is the muffler delete.

@desoneill5489 Год назад

I wouldn't recommend using silicone on that seal. It will make it very difficult to remove the bulb in future. I have a 2007 E83 x3 and I have recently replaced both my headlight front polycarbonte plastics. I used butyl rubber strips (avail eBay) and a small heat gun. When removing the old plastic lenses don't overlook that there are probably a number of torx PK screws some hidden behind two bent rubber air vents. It wouldn't have been too difficult to cut out s new round seal for that blub out of some similar material.

@carcreationsyt Год назад

Good points! Thanks for the tip!

@vibingwithskeet 8 месяцев назад

My 2014 528i headlights are condensed and so I’m gonna try this method as soon as i get off today!!

@carcreationsyt 8 месяцев назад

Let me know how it went!

@tonydatiger3536 3 месяца назад

I have a 2014 535. Any luck.. My driver side head lamp same issue

@vibingwithskeet 3 месяца назад

@@tonydatiger3536 not for me lmao. I have adaptive led so i don’t have access to my lens like he does.

@Dani92italy Год назад

Is it possible to perform the same operation on a bmw f20 with full led headlights?

@carcreationsyt Год назад

Yes I believe it is!

@gretasniukstaite2231 3 месяца назад

This video is amazing I literally have it on my F20 BMW series 1 literally the same headlight as well. Will do a quick video once I get to fixing it as well! Amazing!

@Riggermortis1st 11 месяцев назад

The reason the headlights are cracked is because your shutting the bonnet down wrong, just lower it till it stops on the catch then give it a push down on both sides at once, never drop it down from any height.😊

@carcreationsyt 11 месяцев назад

We had a friend that dented his hood by pushing it down, so we’re trying to stay away from that. I think the headlights cracked from living up a 6km long mountain dirt road.

@purrungas2012 7 месяцев назад

Poor engineering if that's the case

@makeupwithgul7293 Год назад

Do u carry this work out for others i never find a good garage

@carcreationsyt Год назад

No sorry, we only work in our own cars for the most part.

@robertpranjic7362 Год назад

The buyer of your car will be happy when he tries to pull the headlight modules

@carcreationsyt Год назад

😅 at least they don’t fog?

@robertpranjic7362 Год назад

@@carcreationsyt that's true :D

@tedlahm5740 Год назад

Locating the actual crack can be daunting.

@carcreationsyt Год назад

Agreed 😅

@GeneralKato Год назад

The openings in headlights are a feature mentioned in the manuals…. RTM… If you close the tiny openings, you close it off which then can lead to other issues. Choose which issue you would like to have in advance…..

@carcreationsyt Год назад

Hmm, yeah. Good tip. No issues yet, but will keep an eye open.

@corese75 Год назад

Just saw a guy putting all the way in a small 1/2" hose connected to a vacuum cleaner. Seemed quicker than just a hairdryer.

@carcreationsyt Год назад

That could be a really good idea! I’ll have to try that next time I have a car with the issue. Thanks!

@michaelpace1075 8 месяцев назад

Sorry it’s such a hassle to remove your headlight assembly. My Ford takes 3 bolts and a screw to remove. About 2 minutes.

@carcreationsyt 8 месяцев назад

😂 typical… even a Porsche headlight can be removed with less than 3 screw

@964cuplove 4 месяца назад

First hint, you have a garage ? Use it…

@carcreationsyt 4 месяца назад

😂 yes, 100%

@Mexiepino 2 месяца назад

There is too much going on. All you have to do is remove the cap to access the headlights and allow it to sit overnight. When you wake up the next day it should have removed condensation completely. You’re welcome.