No video :(

Carhartt Tool Roll: Wonderful, but for what? I just cannot make a tool roll work. Help me! For what?

Подписаться 67 тыс.

Просмотров 16 тыс.

50% 1

This Carhartt Tool Roll is solidly built, and durable. But for what? Why? What am I missing. I cannot get a tool roll to work for me. Help me solve this problem. What do you use a tool roll for? How do you keep the tools from falling out? So many questions.
Amazon:
amzn.to/3yYt1SI

Опубликовано:

29 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@dragonrider93 2 года назад

This is just another example of a good idea being over engineered. Every tool roll I have ever seen was one sided, with a fold over flap.............On a side note, I can see all the Millennials Googling Sewing Machine

@FloorItDuh 2 года назад

No we are not because those of us here watching this channel actually know what one is.

@georgecroney6168 2 года назад

They still teach sewing at most schools believe it or not

@chicken045 2 года назад

Dude millennials are hitting 40. Time to find a new joke.

@luisadrianlara5561 2 года назад

@@chicken045 The sobering truth.

@bill4123 Год назад

Any machine with "top dead center" in its vernacular is alright in my book ;) .

@toododd 2 года назад

Here's some help: use the handle when carrying the roll when its rolled. Cinch it down after its rolled. Store the tools handle or thick side in the pockets. Select tools that will work both for their use and how they will be stored. I use a bucket boss which is almost identical. Have never dropped a tool from it.

@bigneek714 2 года назад

I use it for knife storage when I go on trips. Super knife nut so I like to switch often 😂. Folding knives are small and I’ve never had any fall out - especially if use the clip over the seam

@vickisell7161 2 года назад

I'm using it as a knife roll. I keep it in my bag and travel with it. If you tighten the straps well and don't purposefully shake it trying to get the tools to fall out it works great. As a knife wrap its a little short but if you can use a 10" knife as your main chefs knife you're golden. Also much better construction and quality that actual knife wraps of the same size. 10/10.

@jlruiz7634 Год назад

I’m looking to purchase this roll for the same purpose. 10” chefs knife is the longest in my collection, it should work fine huh?

@billmaguire6216 2 года назад

Simple solution. Add a flap on each side 2"- 3" wide the length of the roll. Canvas, denim, or thin leather would do. Write to Carhart with the suggestion and tell them you would review a sample on your channel, thus giving them good exposure.

@Kevin_747 2 года назад

I have a Dickies branded tool roll I bought off amazon. It has end flaps to contain the problem you are addressing. I like them so much I bought two more. One for my airplane and one for my Ebike, which I carry in my airplane. I like tool rolls much better for my use, especially in my vibrating motorcycle saddlebag. Tool bags for me end up being disorganized and what I'm looking for is always at the bottom.

@drengskap 2 года назад

Tool rolls - great for sets of similar-shaped slim tools such as wrenches, punches or chisels, not so great for mixed sizes and shapes.

@lastbesttool 2 года назад

I tried a handful of combination wrenches, and they fell out faster than the pliers. All this needs is a flap to retain the tools. Might need to install one myself.

@drengskap 2 года назад

@@lastbesttool Yeah, a flap over the tools to hold them in is pretty essential, which is probably a fundamental problem with tool rolls which have pockets on either side.

@bookmn0926 2 года назад

Put handles in the pockets, this way you also know the tool you ate grabbing. The tools also fit better.

@cjr1881 Год назад

Learn english and get smarter

@jollywrencher1163 2 года назад

Tool rolls have been around for hundreds of years so I think some people with a more mechanical/problem solving mindset have found it's usefulness. They probably didn't mindlessly dump tools into them and then pout about it not automatically working perfectly. I've had wrench rolls, car specific tool rolls, tool specific rolls, and they have their place, but I don't expect them to work in every occasion. The added benefit is that for the car, the tools aren't banging and rattling around. Perfect for under the seat.

@egbluesuede1220 4 месяца назад

I have numerous rolls for knives, chisels, and carving tools. I don't use them for wrenches which a lot of them are marketed for. But for my use, all similar sized tools and I can roll them out when using them to select from the various sizes. I agree that how you use tools probably isn't right for a roll.

@orlandozoli 2 года назад

I like the Bucket Boss - Super Roll (74004) because it has pockets that close with zippers.

@yosef6216 2 года назад

mine arrived yesterday - sending it back. Thanks.

@SriramKarra 2 года назад

Found rolls to be suitable for small sets of tools to be stowed away in a bike or car etc for a rare occasion, when you would not mind "opening up the kimono" and laying it all out. However a tool roll without a flap to hold the tools in is just utterly baffling.

@mthabitX 2 года назад

Agee. I use it in my bike. Roll it up and place it in a cylindrical tool compartment made of pvc. Perfect for long term storage in small space - as you mentioned.

@graciebonsai7272 2 года назад

Perfect for bonsai tools! Residual oil accumulation in the fabrics helps to ward off rust.

@MrJruta 2 года назад

That’s cool that you still have those from childhood

@FA-tq9ip 2 года назад

If this tool roll had elasticated loops running along the middle which you put the tool under while the other end of the tool sits inside the pouches that would really help to prevent the tools from falling out.

@rezechs 2 года назад

I use them to keep bins in my van organized they are filled with similar tools and labeled. I use my Veto Tech XL for actual normal daily used tools

@master11pizza63 2 года назад

Just bought my first tool roll waiting for it to arrive. Plan on using it for storing tools in house when I need them and not having to dig them out of tool box in garage. Should be much lighter than my tool bag. Weight and convenience big plus for disabled. Now I know where tools will be and no more lost pliers in house or trying to find screwdriver in junk drawer because my kids didnt put it back. Also a good excuse to upgrade old worn out tools !

@peterwilson1663 2 года назад

I used mine as an organizer for road trips. Multitool, flashlight, pens etc.

@sunnymoondog 2 года назад

You're so lucky to have a nice mom. I wish mine was. 😪

@RedIron1066 2 года назад

It looks pretty decent built, but I use the CLC tool roll for my commuter car tool kit. Has socket pouches and accommodates a nice assortment of tools. Cinches up nice and never lost anything. Tried a Bucket Boss brand and it fell apart in weeks.

@rhondahall9832 8 месяцев назад

What does CLC mean? I might buy something for my boy’s truck.

@spark1cw 2 года назад

I was a year-round bike commuter for about 10 years. I found a smaller tool roll was great for holding all of the essentials: air pump, adjustable wrenches, allen key multi-tool, cone wrenches, tire levers, patch kit. Keeping these items in a tool roll was nice because I could just grab the roll no matter what bag I was riding with (backpack/panniers/ fanny pack/etc.). I think tool rolls are nice for keeping small tool kits together where portability is key. For example having a tool roll for camping, skiing/snowboarding, or music equipment (if you're a gigging musician). I don't think tool rolls are very practical for more general tool storage.

@lastbesttool 2 года назад

I found that for my bike tools while riding, I store them according probability of use and job specific. My tire repair tools stay with my tube/CO2/pump. My intricate adjustment tools (tiny hexes/drivers/disk brake, etc. stored away where they won't get lost during a hurried roadside repair. I usually have a faster mini tool with essential hexes easily accessible and not under or behind anything since it is accessed regularly. I find a lot to tools on the trails so I know others are not following my wisdom.A loop around Slickrock in Moab usually yields a few tire irons, some hexes, and a chain breaker or two. And some used first aid stuff and full sunscreen bottles as well.

@inuyashacoolieo 2 года назад

I have a BucketBoss one which has zippered compartments that works great for all my hand tools. I fly with a Pelican case full of tools and it makes keeping all my wrenches, sockets, screwdrivers, and pliers together nice because it rolls up compact and it pads them too while they're being thrown around the airport. I'd like to get an Atlas46 one of this one ever craps out. But, for $36 it's been pretty good to me.

@whiteswoodworks 2 года назад

I keep one of these in my truck stuffed to the gills. Love it.

@andygilbert1877 2 года назад

I find a zipped pouch more useful for the same purpose. As a basic breakdown toolkit for my wife’s (small) car I used a Milwaukee M12 pouch someone gave me. Even has a few Velcro straps inside to keep stuff in place and tools are pretty much crammed in, though easily accessible as it’s fairly shallow. Also has get you home kit such as duct tape, zip ties, electrical connectors, wire etc. Best bit is it fits under the drivers seat so it’s not kicking around the trunk/boot.

@95Dap8 Год назад

Someone asked, "What for... ". It's hard to explain to a butterfly life in winter.

@ozmote 7 месяцев назад

Video summary: He doesn't like it because tools can fall out when carrying the roll vertically.

@WorkingViews 2 года назад

yea i noticed early that the tools tend to fall out. I use it for my wrenches now. It's been working fine since it just lives in a drawer in my truck. I think the only thing that would make it usable as a mobile solution would be to sew caps on the ends.

@matthewthomas5997 Год назад

I think maybe just keeping a spanner set organised is a good use for it - even just in a draw they aren’t all sliding around, otherwise if you need to port them somewhere just really cinch down the buckles

@mynameisbryanok 2 года назад

you can modify it by removing the stitching from one side so it can act as a cover? Maybe then tools wont fall out.

@rrt08 8 месяцев назад

The CLC 1173 socket/tool roll pouch corrects all these problems.

@turdsandwicher 2 года назад

I kind of wanted one to keep in the car with me as a sort of emergency tool bag type deal. Not now though haha.

@jris 2 года назад

I’d go with a smaller CLC bag if you really wanted to be organized. They’re not as nice as the veto packs and not as pricy.

@tomcardale5596 2 года назад

Don't be swayed by this tool roll, there are much more functional ones that are genuinely useful for that purpose. I have one and it's great for stopping things rattling around and takes up the minimum possible amount of space.

@ajcampbellconstruction6504 2 года назад

I do mobile mechanic work and I have all my tool in a full sized tool box where my back seat used to be in my crew cab pickup. I do this because you can never seal a service truck tool box - hated my tools getting rusty. I use tool rolls for almost everything. I use the Dickie,s version. They have an extra flap that covers the exposed end of the tool. Keeps them from falling out and for me no rattles. I fold them more then rolling so they fit in the drawers. Also I keep a can of spray gun oil and give them a spray every now and them right in the roll. Keeps everything clean and rust free.

@3vil3lvis 2 года назад

The major design flaw is the lack of a flap to hold the tools in. Perhaps if you put short tools (like folding pocket knives, flatware, sds drill bits, punches or dies) in you could fold it down the middle before you roll it up and that might prevent the tools from falling out. Alternately, you could sew a piece of material in the middle to hold the tools in .

@mattkamoda7160 2 года назад

Works great for organizing your knife collection

@lastbesttool 2 года назад

Thought of that, but my folders are all for daily carry, and the fixed blades don't fit well enough. Same with flashlights. Trying to think outside the box on this one now.

@caramelzappa 2 года назад

I like tool rolls in concept but in practice they're just too slow. I like the idea that it keeps things organized while efficiently using space, but compared to regular tool bags, pouches, foam cutouts, etc it's just super slow to wrap and unwrap the roll every time I need something. My speed wrenches came in a nice tool roll, I always lose any time they save just by unwrapping the thing. I feel like they were close to solving the problem you bring up with this carhart. If you could use it for small tools, fold it in half, and then roll it, nothing would fall out.

@filletmignon5221 Год назад

Unclip unroll no digging no time wasted explain how it’s slow

@computergeek673 2 года назад

The end piece of a shoe lace is an aglet

@brandongregg4287 2 года назад

Just thinking outside the box, but if you have a small pocket knife collection maybe you could use it to store the knives?

@bluefj-wc3vz 2 года назад

I've had/have several. Mostly military surplus NOS. I even had an old unobtanium factory Toyota Land Cruiser toll roll with the Toyota grease gun! They just don't ever seem to be ergonomic for me personally. I'd rather just use a tanker bag.

@lastbesttool 2 года назад

Dang, now I wish I had kept my old Land Cruiser tool roll and not just the wrenches.

@peterryan7340 2 года назад

@@lastbesttool very easy to find those kits in Australia

@tyrrellroach5872 2 года назад

Seems like a design flaw. To me the pockets should be on the one side and a flap to flip over the tools this way they are somewhat secure in the roll.. just my two cents

@robbabcock_ 2 года назад

I'm not sure what the 'killer app' is for a tool roll. Maybe for hiking or camping? I dunno, generally I don't use much for construction tools in the woods. Maybe for carrying on a motorcycle?

@philjono2462 Год назад

Ah ah ah with the pliers 😂😂😂

@BitGeeker 2 года назад

I second the comment on Atlas 46. You need to check out the Yorktown Beast quick detach tool roll. Let us hear what you think. Thanks for the great content.

@jameswaters313 Год назад

It just needs flaps on the side. I don't get why nobody seems to make this style roll but with dual flaps. I may buy one a just sew some old jeans onto it.

@ismaelrojas01 2 года назад

If the man it’s self Last Best toll can’t get a use for it I guess pretty much useless I was considering of buying this for a friend since he love that brand guess I’ll save my money

@projectbuild9784 2 года назад

Find them useful for some basic tools left in a vehicle or on a machine to be able to fix small things as they happen. The roll helps keep them tight together and not wasting space or, most importantly, rattling. Never seen them as ideal for every day use. Perhaps a spanner roll at a push but even then I find it annoying.

@TylerSnyder305 2 года назад

I was using a tool rool for my airgunsmithing kit, but it didn't end up being that useful for me.

@jrichardson6 Год назад

Just what I thought … car Harry love their stuff but it would be just as effective to carry your chisels and pliers in a rolled up towel then you could have a bath after work😂😂 a flap sewn along both the long sides might have been a design idea … 😊

@Rickyd615 2 года назад

Atlas 46 Yorktown Mechanics tool roll lives in my car.

@permaculture3 2 года назад

I agree, can’t say enough good about Atlas 46 and the Yorktown took rolls. I bought the $189- version. I thought was an absurd price until I realized the functionality. It keeps tool quiet in the back of the truck and holds what I need in a compact space.

@Renatorodrigo507 2 года назад

Tool roll only good for wrenches.

@jris 2 года назад

Useless for assorted tools. I have a few Mayhew rolls in my box that come with sets of cold chisels and punches. I go back and forth if I’ll continue to use them.

@georgeferlazzo7936 2 года назад

Hello again Doc Thank you for another Great Video. I am thinking just your longer wrenches in the bag. Again thank you and Happy New Year's to you and your family.

@user-dc2fw9jd3v Год назад

Maybe use it as a giveaway?

@user2144 2 года назад

Seadweller?

@lastbesttool 2 года назад

DSSD

@voskuhlgavin462 2 года назад

Atlas 46 tool roll

@lastbesttool 2 года назад

Looks like an amazing tool roll, but a set of pouches does not display the tools and might not encourage single hand extraction. I already use a a series of pouches in a small gate mouth bag and that is similar in function plus less cleanup.

@felixf5211 2 года назад

I like Carhartt products, too, but this is a poor design. I have two tool rolls. Both for punches. I have so many punches and drifts that sometimes it takes a minute to find the right one. A tool roll for transfer punches, original packaging, that seldom use. And a small Wiha roll for commonly needed punches that I can take to whatever I'm working on. Not having a shop crane, it's easier. Otherwise, I prefer a pouch for travel and the like.

@mchaves7663 9 месяцев назад

Did you find the perfect tool roll in the end? 😊

@lastbesttool 9 месяцев назад

No. Still looking.

@larryborkstrom3580 2 года назад

Combo wrenches

@FloorItDuh 2 года назад

Why use a tool roll when you can just use a tool bag? I find way more utility out of a bag than a roll especially if I need to grab a bunch of tools.

@maximeostiguy8838 10 месяцев назад

Probably because all the tools you put in the rolled was put in the wrong way..

@donc5220 2 года назад

Pocket knives

@jack.charlesc4750 2 года назад

I bought one .....and same issue ......so sad wasting my money I am disappointed

@mph3500 2 года назад

Punches and chisels?

@40Glockfan 2 года назад

A tool no more than 6”😏

@jimgd4 Месяц назад

If, per chance, you happened to be a collector of pocket knives or multi tools, you could cinch them in by their pocket clips, insuring that they would not be falling out, and you would have a nice storage solution for your knife/Multi-tool collection. Ixnay on the oolstoragetay.