I just reveive this 360cam kit today and I try it really fast and look great... thank you for that ... but i leave the batman cam in the old port and it look to work in 360 mode with 3 other cam in other port 👍👍👍 but i Will wait the final instalation to find à good place for the side camera stay there when i remove the door . Plug and play and very cooooooool
Hey there, great video, and thank you for doing Carobotor’s job by elaborating on each and every option. I have a question, regarding the trigger cables, we have on the back of the K1 2 right and left signal trigger, and on the camera there is a trigger cable also, do we have to connect both sides? Or the ones on the back of the K1 are enough to run the system fine? Thank you and have a good day ahead
Hey brother finally got the cameras, I have a quick question do you have to connect any wire to the reverse light for the rear camera? Or it does it itself like Batman?
Great video and content. One question regarding the 12 pin video connector. Can you show where this connects on the back of the K1? Or, will it take additional effort i.e. (cutting, wire splicing) etc.thx.
Thanks for sharing this information. I purchased the K1 360 camera package from CaRobotor directly. I installed it but left the batman rear camera connected as well (so I have two rear cameras). I have a few questions that I hope you can help me with: How do you get to the 'calibration' menu? Have you purchased and installed the new 360 camera package the CaRobotor is offering now? Are you on WhatsAPP?
i no longer have the vehicle close, but when i do, ill update this thread with calibration menu. i purchased some cheap cameras to test out. but the quality wasnt great. i just purchased the carobotor ones, and will test. how is your video quality? on the batman, i realized, i could only have either the batman, or the rear cam, never both. hows your experience?
The turn signal cable is on the cable that plugs into the back of the k1. see it here ae01.alicdn.com/kf/Sf8bd2fafa0304bee9ecffc478d392444n/JUSTNAVI-HD-3D-360-Camera-Car-Bird-View-System-4-Camera-360-720P-Panoramic-225-3D.jpg_Q90.jpg_.webp
I'm interested in adding just the front camera, could I buy this kit and keep my batman but add the front camera only? Better yet, could I just buy another Batman camera from CaRobotor that I could mount to the front and buy a multi cable than have the higher quality of the Batman on both the front and back?
@@rhd-jkur401 Did you have to apply any special setting for the Seicane 360 cam to enable the backup camera or works automatically? Also, did you remove the default backup camera plug/wire from the K1?
Hey mate! Thank you for all the info. I just installed the cameras but when I try to open the 360 view app, it says it needs to be ativate and pay the licence. You paid for a licence by any chance?
Thank you for providing a great video illustrating the 360 cam setup. You must have done a ton of research plus trial and error because Carobotor provide 0 customer assistance. I really like the K1 which provides much better sound and functions for my Jeep Sahara 2013. I have so many questions about settings and software updates. Do you think you could help me or know someone who could?
I think there should be a function for the image to be stitched, contact Carobotor, I installed the similar system on my wrangler abs image comes out seamless after stitch function. It’s a calibration required…I can see the image is not stitched properly in top view image on yours
Yes, I reviewed the option that allows you to calibrate the cameras which is built into the software. I have a few other modifications to make to my setup before I do my final calibration, so will get to it whenever I can.
@@rhd-jkur401 oh cool so there is an option for the calibration…can’t wait to see it, post the video when done. I will be installing the K1 and Jpro soon maybe j can connect my currents cameras to it
@@rhd-jkur401 thank you amazing can you post the link of the cameras also, is there a way to get high definition cameras? Also when you do the calibration process can you do a video on it too so we can see the final setup and result please…by the way awesome videos :)
@@5sunny01 I have posted the cameras i used in my post. Not sure of HD cameras. We will have to wait for Support in future. Calibration pictures to follow once i figure out the calibration mats.
These are the ones am using. Plug into one of the available USBs and format as additional storage. www.amazon.com/gp/product/B07B984HJ5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 www.amazon.com/gp/product/B07G5JV2B5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
hi there again but by any chance can you provide which USB adapter or reader you are using to read the memory card? the current USB line provided by carobotor company is just for single USB which I imagine is just for charging and connecting phone.
I just installed mine. The only problem I have is the turn signal cam. When I turn the my signal the video is not showing. I already turn it ON in the settings just like you showed on your video. I just want to ask did you do extra wiring? I noticed there is a white colored wire at the end of the left and right wire camera. Thanks
You need to extend those wires to your turn signals to get that. Its a 12v input that triggers the cam to switch. IF you want to use the Rear view cam instead of the batman, you will need to connect rear cam to reverse trigger too.
@@chesleylohnes8933 I ran with the cables similar to this vid here > ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AnwdMlHY1eY.html I created a disconnect on the 4 pin camera cable right by where the door disconnect is located.
Yes, the batman still works. However, you can either use the batman rear cam or the 360 rear cam. if you have both plugged in, they tend to interfere with the video. you could ideally create a switch to flip either/or.