I usually stick a piece of thick tape on the back cover before unscrewing it with any tool. This prevents the back cover from being scratched if the tool comes off.
Good video, thanks. Bergeon sell a set of three carbon fibre tweezers quite cheaply. They are quite brittle though. Cousins UK also sells various tweezers with carbon fibre tips. It might be worth applying more silicon grease to the gasket before refitting it. You can get little pots which apply just the right amount easily.
Thanks for the tip! I really need to get a few tweezers that are not metal. Yeah, that is a good idea on the grease too, I have some, but I need to get the little applicator you are talking about because right now it is very difficult to apply haha
In my experience, it is critically important to unscrew the crown before removing the plastic padding ring. Otherwise the spring on the stem will push the dial to one side, making it difficult to remove and reinsert the ring. It was not obvious to me at first and it took some time to figure this out.
Although I've used the same tool to open and close a watch, in some cases a tennis ball or rubber ball off Amazon works too, and doesn't really risk scratching the case.
I replaced a battery in the smaller version of this watch today (EFV-110d). It was very difficult for me to fit the white plastic retention ring back, but then after some tweaking I discovered that it's much easier to do it if the crown is unscrewed. Maybe someone will find it helpful.
@@andrewshadowy2025 Hello! No, it seems to be a different one. The bigger model has SR927SW (can be seen at 8:29), the smaller one has SR920SW. They're different in thickness, make sure to order the correct one.
They went up in price quite a bit but if you can find one for $100 or less it’s a really phenomenal watch. Honestly I should just own this one watch and be done with the hobby 😝
This is my fav watch and now it’s time for me to change the battery in mine. Did you notice before the battery died your watch losing time about 10 mins or so? Mine is still going but losing time and so think I now need to change it’s battery?
@@JustWatches1 Weird. I guess if it rolled off the assembly line in March 2019 that would be accurate for their 3 year estimate. No sweat though, 10-15 minutes every few years to change a battery is no big deal.
That is a Barton silicon elite. A great strap at a great price and it comes in a ton of colors: www.bartonwatchbands.com/collections/elite-silicone-quick-release
I open my citizen ny0040 i as it went seven seconds minus a day then i closed it and i don't care so much for water resistance because i don't dive i just swim and everything is fine
True, if you don't take your watches into water you don't have to worry as much about getting all the gaskets resealed perfectly. I don't dive or anything either. The most water my watches see is the dishes (and I usually take it off for that too, LOL).