Looks like the old 930 loader. This unit is very handy around the shop. I would keep the machine for your shop, excellent for the mud in the back storage area. However: if you insist on gifting it away, I’ll start making room! Lol Great buy, thanks for the video.
Got coffee ☕ . 😡 man o man the throttle is giving you fits at every step..... 🤗 the pain is real. That's why I like working on the old stuff challenges. Anybody can work, on the new stuff.🤥 shit more computer than truck. Thanks FTI ...👍
Great deal!! Loader just needs a little TLC and it will serve you well.... It really aggravates me with companies that don't clean their equipment... All that filth creates rust,destroys seals ,bearings and pins,causes parts to sieze,so damaging....🙄
Keep it until you get a fair offer. With that rotator on the forks its handy for assembly/disassembly. A chain on each fork on front/back of engine/part. You can tilt it while hoisting in/out. I used a chain block for that purposes.
Cool video, nice to watch. A suggestion though, it's satisfying seeing the power washing, but might be worth speeding that section up, double speed or something.
Its been many moons since that old gal saw a pressure washer....hate to see machines all crusted up like that. Hopefully you gave the top of the transmission etc a blast off before you put the floor back in...🤔👍
I'd say you should keep it for the shop but I'd like to see a video showing it getting a little bit of a better cleaning and I guess grease and lube it up then it could be put back to work around your shop
I've run the 910 version of the IT12 and was a great little loader for getting around the housing track's behind the curb line and between the building backfill utility ditches
Hope you cleaned up the mess under the floor boards. It looks like you could mount a blade in front instead of the forks. Thanks. Look forward to further videos.
Did you check blowby on the engine oil level dip stick ? One of the first things you check on an old unknown engine to determine it's running condition. Overall, given the crazy prices pre emission / computer equipment is getting it's worth doing whatever needs to be done to resell it with a good feeling you haven't pulled a fast one.
Yesterday I was driving down Lamonta road and I see this white and gray F-350 with loader tires in the back on Gardner road, and I think that pickup looks familiar.
I would keep the machine for around the shop since it has a rotator makes it unique and something you could use on small jobs because it is better to work smarter and not harder.
Governor just needs Freeing Off. Its built by Mitsubishi under licence from CAT 65HP Great liddle machine IT Stands for Integrated Toolcarrier its a CAT 910 Fitted with Lundberg Loader Frame hence becomes a n IT12 which has the Quick Coupler and a better lift profile/Config than the CAT Loader Frame
That exhilarator is your fuel shut off pull up the shut it off and press it down to start Irene an IT 28 and I was used to the old hanomags from Germany
Very cool! ITs were the quick change from Cat that med sized construction companies loved fer how quick ya swapped! NO ELECTRONICS! I say make er a yard machine!
If you heat up the shaft, bolt, nut etc hot enough, you can melt paraffin wax into it. Let the part cool to the touch. Works awesome! It will creep into every crevice and works way better than penetrating oils. Been doing it for years and has never failed to work!!! You can spray with your favorite oil after it loosens up as the wax is compatible with the oils. 😁