Chambering a new barrel for the wife's rifle (PT 2). 6.5 Creedmoor

Подписаться 33 тыс.

Просмотров 103 тыс.

50% 1

Today we are chambering the new Preferred barrel for the wife's rifle. We are using a PTG floating reamer set up. This will be chambered in a 6.5 Creedmoor. We really take our time here, plunging in only .050 at a time then as we get closer to the final depth we plunge much less. We really focus on sneaking up on the final reaming depth of the chamber. This allows us to really pay attention and hit the numbers right on the first time and avoid machining mistakes.
This has been a very fun project so far and I'm really looking forward to getting this done so we can get to the range soon and start the load development and testing.
Visit us at
vaughnprecision...
Muzzlebrake / recoilinv
Want some shirts, mugs or swag that help support us, check this out! Every buck help’s!
teespring.com/...
Want to help support Vaughn Precision RU-vid Channel, becoming a Patreon is one way you can help! / vaughnprecision
Interested in some of the products and tools we use, check out the links below! They help support this channel with no additional cost to you! We truly appreciate it when you use these links!
Arken Scope
bit.ly/2RhGrUM
Best Rifle Scope on the Market, it the one I use personally
www.amazon.com...
Duck Targets
www.amazon.com...
3D Targets
www.amazon.com...
Bench Block
www.amazon.com...
Tekton Punch Set
www.amazon.com...
AR Vise Blocks
www.amazon.com...
Brass/Dead Blow Hammer
www.amazon.com...
Duracoat Firearms Paint, Amazing Stuff..!
www.amazon.com...
Blackhawk Holsters, you’ll want to choose the size when you look it up!
www.amazon.com...
ProForSho Hearing Protection
www.amazon.com...
Reusable Hand Warmers, these things are amazing!
www.amazon.com...
Wheeler Gunsmith Screwdriver Set.
www.amazon.com...
Gunsmith Bench Block.
www.amazon.com...
Dead Blow Hammer.
www.amazon.com...
TEKTON Gunsmith Punch Set.
www.amazon.com...
Gunsmith File Set.
www.amazon.com...
Wheeler Scope Mounting Kit Combo.
www.amazon.com...

Опубликовано:

20 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 109

@daveaver 3 года назад

Picture looks crisp and clear.

@mariodesmo 3 года назад

Your picture looks good. Nice to see you and the barrel back at the lathe! Looking forward to seeing the rest of your 6.5CM build!

@sylviavasques9053 Год назад

Can you make a video for a Barrel for a 303 british

@conservativesniperhunter7439 3 года назад

It’s good to see the chambering process in action. Some RU-vidrs think it might be boring for their viewers to watch but not for this firearms enthusiast. Thanks for showing us how you went about it . Cheers 🍻

@rossilake3430 2 года назад

Hobby machinist here, target shooter looking to chamber .7mm .284Shehane in Bartlein barrels. Thank you. Yes PTG! New sub’d viewer, your video looks great. I always use 1/10,000 or 5 tenths to adjust runout.

@conservativesniperhunter7439 2 года назад

@@rossilake3430 If you like this kind of content check out Eagle Eye Shooting Videos. Kenny is of the finest young gun smiths in Arizona. He has been building some tack drivers lately. He builds PRS Centerfire and Rimfire rifles . Cheers 🍻

@CHenry1951 3 года назад

The picture looks great, thanks for the video....... keep them coming !!!

@vaughnprecision 3 года назад

Appreciate the feedback

@curtiswest4272 3 года назад

Glad to see you back out doing your thing!

@davidschmidt5810 3 года назад

Looks super clear to me. Thanks for the super clear information on chambering too.

@HanstheTraffer 3 года назад

I have collected a few 22lr barrels that I intend to ream for 22 WMR. Learned a lot here. Thanks You ...The picture is great. But I don't think I would notice unless I was watching on a very large TV.

@fingerdrummingTV 8 месяцев назад

What did you measure to find how deep to plunge on your chamber reamer?

@zeke1eod 7 месяцев назад

Very nicely done, precision takes time. Stay safe, and God bless

@niemdan 3 года назад

You are the best spoken and best at exposing this without a bunch of Jibber jabber waste of words. Thanks a lot for posting. I’m trying to teach myself with books and once in awhile youtube

@vaughnprecision 3 года назад

Thanks for the kind words.!

@edmcwilliams6524 3 года назад

Thank You for A Great Video . God Bless you and your Family .

@planeiron241 3 года назад

Vid quality is great...glad your feeling better

@lexjones2038 3 года назад

Video is looking great! Love seeing the lath work for certain, great to see the process demonstrated!

@dinoc.5537 3 года назад

Very clear video, you can really pick up detail.

@mikeg2868 3 года назад

I made a reamer holder like yours when I chambered my 6.5 284

@cmoslof 3 года назад

Video looks great. Love all your videos and excited to see more lathe work. Just wanted to mention that each small line on the indicator is one ten thousandths (0.0001") so at 4:30 in the video the indicator was reading half of one thousandths (0.0005") not half of one ten thousandths (0.00005").

@paradiseroad6405 3 года назад

...bingo ! ... ...he should learn how to do it the right way between centers... ...and throw the indicators in the drawer...

@animalmother2242 3 года назад

@@paradiseroad6405 at no time in history has someone replied a more incorrect statement.

@mkinchen6643 3 года назад

Camera looks great guys!

@saileencruileen2163 7 месяцев назад

Thanks for the video. -Gunsmithing student.

@thomasteac8919 3 года назад

Video looks really clear really clear video looks really clear

@dalefine3329 3 года назад

Your video is so clear and I guess your new camera is great! Keep videoing!

@vaughnprecision 3 года назад

Thanks for the feedback, I really appreciate it!

@gatorred157 3 года назад

the pictures fine of the video! i see double in these glasses my eyes were operated on about 10 years ago things change! i had spare glasses the bi focal has little dull vision maybe eyes changed! i glade your back!

@rgcrowman3188 2 года назад

Vaughn, what ALL is needed to chamber a barrel, all the parts pieces, tools etc.

@BoltActionReloading 3 года назад

Not sure if its not done processing but I don't think you uploaded it in 4k, or at least its not an option I can view it in. Not sure if you meant it this way or not.

@vaughnprecision 3 года назад

Well, it was my impression that if shot in 4K then compressed by RU-vid it would still look better. I watched my video before this on and then this new video on the big screen and I can see a difference but not so much on a small screen.... oh well, I still love the new camera.!

@robertmeyer5306 3 года назад

Great video!

@toddb930 2 года назад

When you first "dialed in" the barrel it seems like the barrel could be crooked if you're measuring one point on the rod.

@jimklemens5018 Год назад

The barrel is rotating.

@LuisFernando-xh7zg 23 дня назад

Amigo me puedes decir que cantidad de estrías tiene el cañon

@JackLoyal93 2 года назад

I'm looking to ream the barrel of a 1903/A3. Being as that it's chambered for .30-06, (.308) would I be safe using a reamer that measures .3125, or would that be considered too much headspace?

@magnus9165 3 года назад

Your video and audio is great.

@roddawe2505 3 года назад

Your video looks great! I've watched a lot of your videos and just subscribed yesterday after watching your second MEC marksman press review. Im very new to handloading and I couldn't help but notice how little runout (if any) you were getting on your finished cartridges. I also have a new MEC press, I'm loading 30-06 useing forester micro adjust seating die, 165gr hornady sst and lapua brass (first fired). On some of the cartridges the needle barely moves but on others I'm getting up to .003 of runout. Is this normal? Or could it be something I'm going to create these little inconsistencies? Any suggestions or comments would be appreciated. I've learned alot from watching your videos. Keep them coming and thanks.

@vaughnprecision 3 года назад

Getting a small amount of run out is normal. It can be caused by several things, even brass spring back after sizing. If all your getting is .003 I wouldn’t worry much at all.

@roddawe2505 3 года назад

@@vaughnprecision Thanks for replying. Looking forward to your upcoming videos.

@neilcunningham5542 10 месяцев назад

Great video....question I am going to finish a short chambered barrel fir 25-06. Going to rent a reamer should I use a live pilot or not.

@vaughnprecision 10 месяцев назад

I would yes. I’m a fan of them

@gardnep 3 года назад

Hate to ask a dumb question but do you drill the chamber out to a rough closest size before reaming?

@vaughnprecision 3 года назад

Nope, just use the reamer start to finish

@atheeralobidy2343 Год назад

Possible link to buy a tool for digging the place of the empty envelope

@masterofnow1 Год назад

Video looks good

@johnyoungs1071 3 года назад

looks good!

@vaughnprecision 3 года назад

Thanks John

@marcomarques2154 2 года назад

Hello Friend. Where can I buy this drill? If possible, send me the link to the site where I can buy it.

@zinfendal0 3 года назад

Great now I want a lathe at home. No government time at work.

@johnaustin6673 3 года назад

Have you ever installed one of Eric's EC Barrel Tuners

@vaughnprecision 3 года назад

No I haven’t but if I could talk him in to sending me one I’d like to test it out.!

@Siskiyous6 3 года назад

I cringe when you move the reamer counterclockwise... I never turn a reamer backwards.

@vaughnprecision 3 года назад

I do agree with you, but for showing it on RU-vid I felt it was important to show the video. That all said, I think I'll mention it in the next video not to rotate the reamer in a non-directional rotation.!

@AirsoftEli2000 11 месяцев назад

Like running a good file backwards

@jonasbruzas2651 Год назад

hi mate,depth micrometer inch or metric?

@greglaroche1753 5 месяцев назад

Where’s part one?

@hansshaffer3788 3 года назад

Picture looks great...but I honestly can't tell any difference on my little laptop from what I saw when you were using your previous camera.

@jonasbruzas2651 Год назад

Morses taper number ?

@wrstew1272 2 года назад

Why would you center the barrel to such a small degree and then have a free floating tailstock? It seems that is redundant. Belt and suspenders?

@jefferyboring4410 27 дней назад

I’d imagine even though it’s free float it still has pressure trying hold it in position when cutting “because it’s got forward pressure and friction” so if the barrel isn’t even it’s more likely to oblong the chamber. So your more likely to get atleast a tighter more even chamber

@gregorteply9034 2 года назад

Compressed air does wonders.

@jonasbruzas2651 Год назад

hi,you lathes name and turning lenght?

@panjywulanggani9215 2 года назад

Berapa harga untuk laras 5,56/223 sampai keindo. Trim.

@emtee212 3 года назад

I'm guessing it's not uploaded in 4k down scaled to 1080 still looks better

@vaughnprecision 3 года назад

RU-vid compresses it down but from what I can tell it retains more detail vs 1080 compressed. I could load in straight 4K without compression but it would take a month of sundays to load a video.

@qapsukalek 2 года назад

Can you rechamber 223 to 22 nosler ?

@edineymoraes9082 3 года назад

Boa noite amigo aonde posso comprar umas ferramentas dessas para fabrica câmara??

@Jmastffp 3 года назад

Glad to see you’re back making videos man. Picture looks great. Had a quick question. I’m getting ready to do my first chambering on a Savage barrel. If I heard right your target was 0.126” off the face of the go gauge to the face of the bore. I assume that’s equal to the depth of pocket in the bolt face. Do you try to hit that bolt face depth exactly, or do you make it a little long for a crush fit on your brass? Like + 0.001-0.002”? Thanks

@vaughnprecision 3 года назад

.125 to .130 will work, but that depends on the caliber your reaming it for to.

@Jmastffp 3 года назад

It’s for a 50 action express. I’m using a .223 bolt face. Pressures and everything will work. 223 is the closest bolt face to the cartridge rim dia. I’ll send ya some pics of it when it’s done. Waiting on my reamer to come from PTG in mid-March

@TheMcgee80 3 года назад

Don't you run the risk of opening up the chamber by polishing after you reamed to size?

@vaughnprecision 3 года назад

If you polish it to much or use to heavy of grit paper you could yes. But 600 grit with light pressure for just a few seconds won’t change the dimensions of the chamber.

@TheMcgee80 3 года назад

@@vaughnprecision and I suppose leaving a thou undersized ND then polishing out to final dimension isn't possible because of the interior shape of the chamber, right?

@vaughnprecision 3 года назад

@@TheMcgee80 there is no way to undersize the chamber unless you have a custom reamer made. But sanding out .001 is harder then you think

@jonasbruzas2651 Год назад

Hi, I am interested in torque wrenches, what do you recommend.

@vaughnprecision Год назад

Snap on or Mac

@jonasbruzas2651 Год назад

@@vaughnprecision many thanks

@jamesmooney5348 2 года назад

Nice

@yefrinanda9036 Год назад

Apa anda menjual laras kaliber 5.56

@kbolyoly 3 года назад

Hi ya Curt, If you want more work to do I still need a muzzle break on my 308. The picture is better, sharper! Karl.

@vaughnprecision 3 года назад

Call me later today

@charlesc.plumley9755 2 года назад

Hello I dont see where i could purchase the Bold Eagle floating reamer attachment. Thanks

@vaughnprecision 2 года назад

pacifictoolandgauge.com/reamer-holders-arbors/112-bald-eagle-floating-reamer-holder.html

@charlesc.plumley9755 2 года назад

@@vaughnprecision thank you.

@charlesc.plumley9755 2 года назад

@@vaughnprecision thanks. You mentioned the cutting oil, what brand and where do i find it ? Thanks

@vaughnprecision 2 года назад

@@charlesc.plumley9755 this is what I’ve been using. www.pmatool.com/vipers-venom-cutting-oil-quart/

@charlesc.plumley9755 2 года назад

@@vaughnprecision thank you again. Really enjoyed your vids. Im a beginner machinist and have several mauser build projects and a Stevens/ Savage action and barrel to build.

@paradiseroad6405 3 года назад

...smallest graduations on the indicator are .0001 ... ...so your half a .0001 is actually half a .001 ...

@jjfoodandtravel4745 2 года назад

How to make airgun barrel

@jonasbruzas2651 Год назад

chamber reamer holder name ?

@vaughnprecision Год назад

Bald eagle I believe

@jonasbruzas2651 Год назад

@@vaughnprecision many thanks

@daviddickson7067 Год назад

One half of one ten thousandth? Based on your use of that particular test indicator, you are actually out a half of a thousandth. At that particular location on the rod. That 10 on the dial refers to ten of the ten thousandths increments or ONE thousandth. The really terrible thing about that method is that it is not repeatable. Try this, dial it in then pull the rod and re insert it, you will get a different reading. But, by using a floating reamer holder, that's ballpark good! The downside of that reamer holder is that in addition to floating it is also pivoting off the pressure of the single driving lever. That makes it ream a tapered hole. As a general rule, when a reamer is making dry (unlubricated) chips, it is drilling. Good video quality.

@thecrusaders2516 2 года назад

4k 👍

@arbyssauce 3 года назад

Wouldn't it make sense to pre-drill some of the material out so you don't have to work your reamer so much? Drill bits are way cheaper.

@vaughnprecision 3 года назад

No because the reamer has a pilot bushing that needs to follow the bore, if you drilled it you couldn’t keep the chamber straight in relation to the bore.

@johnaustin6673 3 года назад

good to see you out in the shop I may need some barrel work. If the dictator J Inslee would open this poor state up