Champion 3100/3400 Generator Extended Run Time 

I did almost the same check it out drive.google.com/folderview?id=1EhdWtjnoDuCZyoHrxZpTAL8ooxCiam40 Also did some modifications so, let me know how I did and if you have any question

To clarify the issue on the check valve... The check valve should be oriented to allow air to flow FROM the engine TO the airbox. I just did this mod on my Champion 3500 today. The plastic clamps like they show here did not work for me... they did not squeeze the fuel line tight enough to make a good seal. Could likely be the brass T's that I got though. But when I pumped up the bulb, gas sprayed out everywhere at the T where the fuel from either tank goes to the pump. But, worm gear clamps solved that issue. As I type this, the genny is still running going on 2 hours now, and not a hiccup except for the initial fuel leaks.

Working on my now almost done! Quick question! If I leave gas selector valve on will run on both tanks at the same time?? Thank you

I am getting the 3500W with remote starter. Does manual priming defeats the purpose of a remote starter? Anyone installed this on that model?

Number three sub here. Glad to be in top five. When you get to 10k subs, remember I was in early

Did you figure out witch way the check valve goes? Open end towards filter or towards valve cover?

Any update on how this is working for you? I bought these items and installed it in my generator. Wanted to see if you've had any issues.

The guy from Pinellas power equipment is gonna kill you! I just ordered all the parts to do this to my champion 2000 for very little money. Great job!

I wondering about warranty!