What is the battery pack you're using? It looks tiny, but still has many cells. Can I power these bulbs with an esc, that doesn't have Hall sensors? Does this unit get hot or something?
I've got a CellMeter 8 - and 'worx' well EXCEPT the fast discharge mode with the AOKoda 150W discharge module. I have 3 AOKoda discharge modules (the bulbs/lights) and they DO WORK with an AOKoda Discharger but none of them 'worx' with the CellMeter 8 discharger I have. :(
i have bought 3 cellmeter 8 from 3 different sellers and no one had performed the fast discharge with 150w module, so i have decided to contact aokoda factory and they said to me that i have 3 cellmeter8 counterfelt (when chinese copy themselves).....
@@seewhatisee2015 I have tried two different CellMeter 8's from Amazon, neither discharge lipos with AOKoda setup.Model number LSDX1 appears on the box they came in, made in China FPV Drone.
So the CM7's balancing by holding TYPE has been removed on the CM8 and you have to use discharge instead by long holding MODE. Meaning you need to specify a voltage which you didn't need to do on the CM7 as it tool the voltage of the lowest cell?
Hi: I see you have some experience with the cellmeter 8, and I was wondering if you could answer a question - when NOT connected to the 150W discharge module, does the "discharge indicator on the cellmeter blink or stay solid? The reason I ask is I bought 2 cellmeters and 2 discharge modules, but cant get the discharge modules to work (led on solid, no light bulbs light). and the discharge indicator on the meter is not flashing either. t 1st, I thought that was because the meter wasn't "detecting" the module, but one happy owner told me that the discharge indicator on his meter flashed no matter what. Any knowledge of any of this? Thanks! Dave.
I want to know can it discharge without the lamps? I have seen some listings with this discharger module which say 5w discharge without and 150w discharge with. Is that true
wow I didnt even know it could do that! do you know how that discharge board works? how does it output the signal to the board how does that board turn on the bulbs, I want to make my own. thanks
You should tel people to only put multiple lipos on 1 board if they are al within acceptable voltage range. Or current will go from 1 LiPo to another frying your board.
That seems a big fail that I would not purchase this just in case you cant hear the beep if you out on the farm or mowing the lawn that the discharge will not stop by itself ?
Do you know if you could adjust anything to make it discharge at let's say 50w (instead of 150w) for smaller batteries? Or maybe it's just a matter of disconnecting 2 (of 3) lightbulbs and you'll get max 50w discharge?
Yes, i think you can do that with this discharger, but do be careful. Below 2.5v cells may become chemically unstable. Se best to be close to the discharge. Once completely emtpy, you can dismiss the lipos
Helicrazy 360 depends on the voltage in the LiPo, 4s should discharge at 10A when full. But as an average on a whole discharge it could very well be 6.5A.
Maarten O I ordered one of these last night because I need a stand-alone discharger. Perfect Regulators makes one but I'm not willing to pay $115 for a discharger.. lol have you had any issues with this unit since you purchased it?
