Cheap and Easy DIY || How to Fix Broken Particle Board Furniture 

It is certain that many have thrown out complete chipboard furniture because of small breaks. Chipboard is cheap, but that's why it doesn't last long. I hope that this will help someone to be able to solve such things themselves, because I also finished this with the simplest tools and the cheapest possible. Really, because of the additional work I do, I am not able to shoot as often as I did before. Thank you very much for watching and commenting, I'm glad you're still with me. ​

Thank you very much my friend for the kind words, I'm glad you like it. I did my best, I hope it will serve its purpose for a long time.

Surely your way is much better in the sense that the repair would take much longer. But here I was looking more to return as much as possible to the original state. I didn't want to spoil the look in any way. If it fails again, then I will do something similar to what you suggested. Thank you for your advice and for watching. Greetings. ​

Hvala puno prijetelju moj, ziv i zdrav bio.

Thanks bro, glad you like it

Hi. First, let me thank you for your interest in my video and my work. The easiest way to explain is to write here what I used. At 3:40 I used wood glue, nothing expensive or fancy, just regular wood glue. At 5:00 I used wood dust that I saved from previous projects. (The color of wood dust naturally depends on the color of the wood itself. I used a darker color because it is similar to the color of this table). I mixed it with the same wood glue and got a homogeneous and thick mass, so that it can glue the parts and fill the gaps. At 6:30, as I wrote in the video itself, it's a parquet and laminate repair kit. You understand that. - Your question: But what about the sanding block and type it was? It is an integral part that comes in the repair kit. At 6:35, in the middle of the box, between the repair compound and the machine, there are two plastic plates. They are almost colorless so it is hard to see them there. These are plastics that are jagged, rough, so they can remove excess mass. Similar to a standard metal file, only plastic. At 8:15, it's a clear lacquer spray, it's used as a final coat after applying any color and it gives a shine at the end, in this case it evens out the color with the rest of the table and covers small scratches. I hope that I have explained everything and that it is now clearer to you. If you need anything else, just write. Thanks for watching and commenting.

I'm sure you're right, I haven't seen anything worse designed in a long time. Really bad solution with these points where the legs are joined. Thank you for watching and commenting. I'm glad if my video could help you in any way.

Yes, you are right. It is wood glue mixed with wood dust. If there is a larger gap, in the form of a hole, then it is best to combine it that way, because the glue would leak out if you put it alone. And the second reason that is combined is that the glue acquires the color of wood dust and thus less holes are noticed.