No video :(

Cheap Bike Parts Tested (Motorized Bike)

Подписаться 28 тыс.

Просмотров 9 тыс.

50% 1

Testing a few cheap parts that can be useful on your motorized bike.
A rechargeable rain proof GPS speedometer.
A simple waterproof tachometer.
And the HP carburetor.
Music:
Mike Tam Original - Home To You
• Video
Tachometer: www.amazon.com...
GPS: www.amazon.com...
HP Carb: www.amazon.com...
Jet Drills: www.amazon.com...
Mini chuck: www.amazon.com...
Upgraded Clutch: (price jumped up sorry)
www.amazon.com...
Upgraded Clutch #2 (Same design, but I don't have one to test yet)
www.amazon.com...
We upload motorized bike videos every week (sometimes more)!
FAQs:
Oil: 32:1, semi synthetic, random brands.
Gas: 87oct
Spark Plug: NGK B8HS (yd-100), NGK B6HS (pk80)
Parts: I buy mostly from Amazon.
Favorite Motor: Zeda (Firestorm) Triple 40
Favorite Carburetor: NT Speed
Favorite Bike For A Motor: I don't have one yet.
For motorized bike help, join the server / discord

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@epicwinfacepie 3 года назад

my new engine came with that same clutch basket, bbut the big bearing in the middle kept falling off while starting the bike, which totally destroyed my clutch pads. i ended up jb welding it to the actual spinning back part. has not fallen off in the few rides ive done so far.

@LAHover 3 года назад

Thanks for the heads up!

@edwingroening5087 3 года назад

Same with my engine kit I bought a few months ago. The bearing would slide outward and the clutch gear would drop and grind on the housing. I took a big washer, drilled 3 holes for the pin's to go trough and put it between the bearing and the clutch plate. That works so far

@epicwinfacepie 3 года назад

@@edwingroening5087 haha everyone has different solutions for the same problem. As long as it works! Happy riding

@leonardarola 3 года назад

Thanks for the ride! Best thing to enjoy during these times.

@LAHover 3 года назад

Glad you enjoyed it!

@leonardarola 3 года назад

@@LAHover Learned so much from YOU and get that, car failed. 2 stroke chinagirl saved my skinny ass. Monument fire. All good. We can always rebuild...

@theodoredionne9537 3 года назад

Thanks for the upload! these bike kits have been getting very popular up here in N.Y looking forward to you testing more products

@LAHover 3 года назад

Glad you like them!

@Spodeboy 3 года назад

Thanks for the reviews. Your video is a pleasure to watch - good recording, good sound levels, and good background music.

@LAHover 3 года назад

Much appreciated!

@motorizedbicyclerider5296 3 года назад

8:35 on the video love that music and that camera angle nice 🚲💨💨💨🤙👍💯

@marygunn2521 3 года назад

Check out mike tam tam on RU-vid. He's the singer/song writer

@Aidon420 2 года назад

I liked that song and keep up the good videos love the motorized bike community and content

@ruskifishingboyz172 3 года назад

Finally another useful video

@AllConsumingJAWS 3 года назад

Thanks for the clutch tip. Keep up the great work.

@yzstormer 3 года назад

Hi LA, just discovered your channel recently, and your video are very entertaining and helpful! Keep up your work! (Loving my Seeutek!)

@LAHover 3 года назад

Thanks! Seeuteks seem to be solid little motors, love mine too :)

@NicksBikes 3 года назад

Looking forward to seeing your 50cc! I bought one just so I could practice using a Dremel on the jug for the first time. Mine ran for a day, reasonably smoothly in fact, until I replaced it with a new 66cc. By the time I tried to put the 50cc on another bike, I could never get it to run again

@iszlaimatyasjeno1301 3 года назад

Thanks for the sealed bearing clutch link

@dmoore0079 2 года назад

The HP carb is a Dellorto SHA clone, which was a common carb used on several mopeds as original equipment. Evidently, they make/sell slides with different profiles to help with the inconsistent throttle response but I never bothered with them. Best I was able to do myself was to jet it fat and then file a couple of notches in the bottom edge of the slide to lean out partial throttle position. It works, but there are better inexpensive alternative carbs out there. I'm currently working with a 19mm KTM50 clone carb, and despite running fairly rich, it seems more promising than the PZ20. If I'm not mistaken, I think it even uses the same main jets as the NT/HP carbs.

@2bit2strokes38 2 года назад

I have an hp carb on my 80cc and running a 68 jet and it runs excellent. I check the plug occasionally and it's it running very healthy at least on my bike. Actually it's been on it for about a year and a half and so far no issues at all

@russl9029 11 месяцев назад

I had the same problem with the hp carb. I spent a month swapping jets, doing plug chops, etc........but to no avail. I ended up putting the stock carb on. Now it runs perfect again.

@godlesslife8382 3 года назад

Not a bad spot for your light

@LAHover 3 года назад

Thanks, I got tired of swapping them between bikes. As a nice side effect it's not blocked by the seat or frame.

@thefpvyawthority8106 3 года назад

I love this channel.

@NicksBikes 3 года назад

I had the same issues with the HP carb. Playing with the jet sizes was the only tuning I could do and like you I prefer to cruise than fly along all day at wide open throttle. My bike just generally ran better all round with the NT Speed carb in the end

@willardbuchanan9122 3 года назад

Awesome nice setup

@only1drumerboy184 2 года назад

Instead of a needle. These carbs you tune the idle mixture and midrange .by the angle on the bottom of the slide.compleley flat on the bottom of the slide is as rich as ideal and midrange gets.And to lean it you need a specefic angle .Go from flat to start then a soft angle were the surface on the front of the slide is longer then the backbit angles up tears the rear badsicaly .

@scootertuningfl2174 2 года назад

i like that carb it runs ran really good for me

@LAHover 2 года назад

Good to hear :)

@Hunter1st 3 года назад

That first product the tacho, I had 2, first one kinda stopped working, only worked when manually pressing the back cover on it, got a new one and it's been in use for 10ish hours now and no issues, yet. It really does help on setting the idle, it's hard to tell when idle is dropping just by sound when it's already low, until it's too late.

@ruskifishingboyz172 3 года назад

Make a bt80 electric start motor please

@413MassDigger 3 года назад

Nice vid brother, is that a poo poo pipe with a badass silencer? or a F2 thruster? im not too familiar with the pipes but need a upgrade with one of those silencers, yours sounds great man. you put your work in to be able to enjoy a good sounding bike!! Thanks for sharing!!

@LAHover 3 года назад

This pipe: www.amazon.com/JZSPORTS-Performance-Expansion-Muffler-Motorized/dp/B08Q3HPZX7/ref=sr_1_2?crid=3FDMOVWTZREKP&dchild=1&keywords=motorized+bike+exhaust&qid=1628553250&sprefix=motorized+bike+ex%2Caps%2C273&sr=8-2 And This Silencer (one bike I cut it in half): www.amazon.com/BADASS-SHARKS-Motorcycle-Exhaust-Muffler/dp/B01N3ONOY9/ref=sr_1_2?crid=1HXE3HSGMBZK0&dchild=1&keywords=motorized+bike+exhaust+silencer&qid=1628553286&sprefix=motorized+bike+exhaust+sil%2Caps%2C217&sr=8-2

@mozezcen-valley7555 3 года назад

really would like to see that clutch bearing maybe do a video of it showing if there's some slop or play Within the bearing and clutch plate or how does it install you sort of have to press it on there or is it really easily to go on hopefully it's nice and snug really will hope to see a video of this very soon

@moked5353 2 года назад

Thanks yo

@SDNerd94 Год назад

I've recently started my motorized bicycle hobby with a cheap 2 stroke 66/80cc kit (bofeng carb, stock rag joint sprocket, hex bolted case) There seems to be a metalic rattling, kinda high pitched. your bike does it on this video. Is that part of the 2 stroking? as I've ordered new jets (china delivery to the uk sucks) and am gonna try a 65 as I've had recommended. Also, what do you recommend as an idle rpm? thanks

@GuilhermeTrojan 3 года назад

dude, since these engines works on wasted spark I believe its 2 sparks per revolution.you can rectify the eletric output off the engine to use the wasted spark energy to light up a light for the bike. thats why led works for these engines and standard incandencent bulds don't, because with the led you can use half the cycle of the alternating current for the diode and half don't, leaving it to the cdi.

@GuilhermeTrojan 3 года назад

but I may be wrong. Anyways your video is awesome! The quality is very high, congrats!

@LAHover 3 года назад

Thanks for the feed back. But from what I understand the first pules from the magnet charges the CDI, and the second pulse triggers the CDI to fire... If the spark was firing twice per revolution the tachometer would display 2X RPM. and this motor is definitely not spinning at 13,600RPMs

@PlayingWithFireOutdoors 3 года назад

got the tachometer , and I use my overly complicated Montana 650 as my GPS on everything

@robertschreier732 3 года назад

General Question. I just built my first bike. First two tanks of fuel were oil rich as required. On my third tank I run a leaner oil mix per my instructions for my engine. First run I lost a ton of power. Now it won't even pull my hill at full throttle that it would pull half throttle during the oil rich break-in. Carb flooded and I pulled it off to check out. Cleaned the seat and now have no power. 4 stroking all the time. Any ideas???

@LAHover 3 года назад

sounds fuel rich. Less oil will thin out the fuel and richen the mix. But you talked about the carb flooding so my guess is the float is sticking or there is junk in the inlet needle that's preventing it from shutting off. Go ahead and fully clean the carb, be sure to get the jet, and inlet. Be sure to run a fuel filter if you are not already.

@robertschreier732 3 года назад

ok I'll check it out. Thanks for being one of only 2 channels that actually answers my questions

@tinypurplefishesrunlaughin8052 2 года назад

Im presently building a different concept motorized bike. Low , lightweight, stretched, minimal, laid down posture when riding, unique braking system and I do mean unique as in one of a kind. Much fabrication in full suspension set-up and electrics. Function over form. I’ve gone a long way on this and was wondering if I have a technical issue regarding anything if I’d get a response? Cause I have a few crazy questions about a “variable re-cussive” expansion chamber?

@robertschreier732 2 года назад

@@tinypurplefishesrunlaughin8052 find a recent video and post your question. Less likely to be answered in older videos. Try to ask in the first 24 hrs of a new video when everyone is still looking at comments

@tinypurplefishesrunlaughin8052 2 года назад

@@robertschreier732 thanks , will do

@willardbuchanan9122 3 года назад

Be careful with the slide throttle that goes into the carburetor if you notice a little notch you put the cable through it will eventually cut it out and then the cable will pop right off of it and then you'll have no threat of the bike will run but you'll have no throttle response because it is slight throttle part goes into the carburetor through the cable that has a little piece of metal that prevents the cable from cutting through eventually it cuts it I've gone to 4 HP carburetors with the slide idle control piece cuts right through that metal aluminum throttle piece it'll just cable cut right through it

@joshuagerlach6943 3 года назад

My tach & temperature sensor are still running on the same battery 2 years later... the temperature sensor never turns off so it displays temperature 24/7 . The bicycle computer battery lasts about a year witch is pretty good considering I use the illumination at night . I’m using a hyper tough work light/ power bank From Walmart zip tied to the front & I really like it because it looks like a motorcycle headlight, it’s super bright & you could charge ur phone or other lights off of it.

@LAHover 3 года назад

Good to know, thanks!

@abikelife1481 3 года назад

What is the max RPMs on your motor?

@joshuagerlach6943 3 года назад

@@abikelife1481 I don’t even know .. it’s kinda hard to see the tach display while riding.. I pay more attention to the temperature 220 f - 240 f at the plug on a big cool head seems like the best operating temperature.. 38 mph on flat ground with a 44 tooth ... I’ll wind her out & tell you later ..

@abikelife1481 3 года назад

@@joshuagerlach6943okay what motor you running?

@LAHover 3 года назад

@@abikelife1481 6800 on my trail bike, 7100 on my street bike when I put the NT speed back on.

@lachlanbruce5566 3 года назад

I use a manual speedometer works great only problem is the adapter only runs on old design wheels

@KevinTodd 3 года назад

NICE

@jamieandbrittany5541 3 года назад

Hey my name is Jamie I just bought a cranbrook bike the other day I am having trouble figuring out wither I should get a 48cc or 80cc I’m leaning more towards getting a 80cc I’ve watched ur videos and I see u have a cranbrook like me same color and I was just wondering what engine I should put on there

@LAHover 3 года назад

I'll be releasing my first 50cc video today, there are a few reasons why someone might want one. But for most riders the 66/80 is by far the better option.

@jamieandbrittany5541 3 года назад

I love motor bikes it’s a great hobby I would have a yard fill with them

@willardbuchanan9122 3 года назад

I have a video on my channel showing the slide throttle pieces falling apart because they don't properly make them right or add enough material prevent cable cutting through slider

@LAHover 3 года назад

thanks for the heads up.

@joehfirebrimstone9727 3 года назад

Interesting. I'm having trouble with the carb, I think 🤔 it ran great for awhile after the chain was adjusted. I stopped to let the engine cool. And by the time I was just about home it started acting up and I have trouble to start it. I live in South East Louisiana below I 10

@LAHover 3 года назад

Check your electrical connections. Spark plug might be taking a dump too... Most common is a clogged jet in the carb, FULLY clean the carb, and run a fuel filter if you are not already.

@joehfirebrimstone9727 3 года назад

@@LAHover thanks I appreciate it

@abikelife1481 3 года назад

So is that a drone following you!?

@LAHover 3 года назад

No it's a 360 Cameras. The "Insta360 One X2"

@abikelife1481 3 года назад

@@LAHover it looks so cool man

@Thrashaero 3 года назад

so maybe i missed something but what is point of gps device if you can get the same on phone? just get a case/mount for phone

@LAHover 3 года назад

This unit does not require a service plan... It's also much safer using this cheap, light weight, and small, unit on sketchy roads than strapping a $$$ phone to your bars... So yes, you DEFINITELY missed something ;)

@Thrashaero 3 года назад

@@LAHover You dont need a service plan for gps on phone either, except for maps. wifi for the preferred app install. I understand having a cheap readout may be handier than a phone in many cases, but doesnt have to be a main phone, could be an old one, or doesnt have to be expensive to run a gps speed function. Come to think of it I have a timex watch that went with a gps receiver that you could wear on your arm, waterproof, and it's about 20 yrs old. So long before phone gps was a thing, I remember using it to see I was going about 500+ mph while on an airline.

@LAHover 3 года назад

@@Thrashaero you might be over thinking this. But if a phone is what you like go for it...

@Thrashaero 3 года назад

@@LAHover yeah you're right i do over think shit. I guess I mean to say there's a few ways of going about gps. but ofc if one doesn't have them and prefers this unit that's cool too

@motorizedbikeenthusiast6880 2 года назад

what tires do you have on the yd100 cranbrook

@LAHover 2 года назад

If my memory is right it's these www.amazon.com/gp/product/B00OC9ZLLS/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

@shaunemicheal7362 3 года назад

Lights, bro... I was just pulled over by our local police dept for not having lights attached to my bike.

@LAHover 3 года назад

Where I ride, I'm not worried... My daily has dedicated lights when I need to go to town.

@Gh0stR1der__ 2 года назад

got that same GPS my sucks tho

@serenityk2tu749 3 года назад

@melvinchamberlin823 2 года назад

Sorry you probably might be able to help me a lot and stuff I bought a and I think it's a 76 or something CC two-stroke motor about the kit and stuff and I don't like that what is it goes on the back tire for your chain I don't like all them bolts and stuff if you know something where clamp around your axle of your bicycle because I got off road bicycle 15 speed bicycle and about to chain all this hanging just the carburetor I don't know anything about the carburetor just sent it to get it running but I ain't got it all put together yet I'm waiting for a little bit warmer weather and do all that stuff but if you need help me send something to me we're going to see to buy parts thank you I appreciate it a lot have a good day sir bye-bye

@ruskifishingboyz172 3 года назад

So u have enough money to start a electric start motorized bike... lol just kidding take ur time... but it would be helpful.🙃😄😊