Тёмный

Cheap Jeep COMPLETE!! How-To Build a Rock Crawler ZJ for $5,000 Total - Part 2 

BleepinJeep
Подписаться 563 тыс.
Просмотров 217 тыс.
50% 1

Part 3.5 Of the Pull-A-Part Cheap Jeep Challenge - Bleepinjeep VS Busted Knuckle brought to you by Tekton Tools. In this episode I'm finishing up this Cheap ZJ. Will it be enough to take the title of the master Cheap Jeep Builder and competition destroyer? lol. IDK but we are about to find out in the next episode!!
BleepinJeep
Episode 1: • Pull-A-Part Cheap Jeep... - Pull-A-Part Cheap Jeep Challenge - BJ vs BK - ep1
Episode 2: • Stock Cheap Jeeps Comp... - Stock Cheap Jeeps Compete Head to Head - BJ vs BK ep2
Episode 3: • How-To Build a Rock Cr... - How-To Build a Rock Crawler ZJ for $5,000
👉Episode 3.5: • Cheap Jeep COMPLETE!! ... -Cheap Jeep Complete How to Build a Rock Crawler ZJ for $5,000 Total Part 2
Episode 4: • $5,000 XJ vs $5,000 ZJ... - $5,000 XJ vs $5,000 ZJ - Let the Cheap Jeep Battle Begin!
Episode 4.5: • $5,000 XJ vs $5,000 ZJ... - $5,000 XJ vs $5,000 ZJ - Let the Cheap Jeep Battle Begin! - Part 2
Episode 5: • $5,000 Cheap Jeep ZJ B... - $5,000 Cheap Jeep ZJ Battles "Busted" XJ on Moab Rim
Episode 6: • Cheap Rusty Jeeps Take... - Cheap Rusty Jeeps Take On Rusty Nail in Moab Utah
Episode 7: • Can Cheap Jeeps Conque... - Can Cheap Jeeps Conquer Pritchett Canyon?
Busted Knuckle
Episode 1: • Pull-A-Part Cheap Jeep... - Pull-A-Part Cheap Jeep Challenge - Busted Knuckle vs BleepinJeep | EP1
Episode 2: • XJ vs ZJ Stock Jeep Sh... - XJ vs ZJ Stock Jeep Showdown Pull-A-Part CHEAP JEEP CHALLENGE - EP2
Episode 3: • $5000 Budget XJ Rock C... $5,000 Budget XJ Rock Crawler Build -Knucklehead Garage
Episode 4: • $5000 XJ vs ZJ Cheap J... - $5000 XJ vs ZJ Cheap Jeep Challenge Builds BleepinJeep vs Busted Knuckle
Episode 4.5: • Pull-A-Part Cheap Jeep... - Pull-A-Part Cheap Jeep Challenge SHOWDOWN XJ vs ZJ!
Episode 5: • CHEAP JEEP CHALLENGE I... - CHEAP JEEP CHALLENGE INVADES MOAB RIM
Episode 6: • Cheap Jeep Challenge t... - Cheap Jeep Challenge takes on Rusty Nail in Moab
Episode 7: • CHEAP JEEP CHALLENGE E... - CHEAP JEEP CHALLENGE ENDS ON PRITCHETT CANYON!
Whats more fun than a Cheap Jeep Challenge? How about one called the "Pull-A-Part Cheap Jeep Challenge, BleepinJeep VS Busted Knuckle brought to you by Tekton Tools"? Heck ya that sounds way better! In this 4 part series (4 parts each, 8 episodes total) Busted Knuckle Films and I will be acquiring a Jeep Grand Cherokee ZJ and a Jeep Cherokee XJ. We both have $5,000 to spend total and that includes the purchase price of the vehicle. We also must outfit the Jeeps for safety and have a $500 budget allotted for safety gear. The first competition will be a stock challenge where BleepinJeep goes head to head with Busted Knuckle in our safety only modified Jeeps. After that we go back to the drawing board and can use our remaining budget to outfit the Jeeps any way we see fit up to a 35" tire for round two. It is allowed to sell parts off the jeeps to add to our cheap jeep budget but we cant use sponsored items or freebie parts unless we account for the cost of those items and take it out of the total. Our Judges for round 1 are Ian Johnson of Big Tire Garage, Ricky Berry from RCV Performance Products, and Eric Hagan a Downhill Dirt Bike Guru. A huge thanks for Pull-A-Part Used Auto Parts and Tekton Tools for making this possible!!
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on RU-vid: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

Авто/Мото

Опубликовано:

 

3 ноя 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 297   
@zachallard2737
@zachallard2737 3 года назад
Your budget rig is bigger and nicer then my normal rig.
@denverdyer8660
@denverdyer8660 3 года назад
Same
@Jon-ko3vv
@Jon-ko3vv 3 года назад
Get some more credit cards lol
@exhaustfumes927
@exhaustfumes927 3 года назад
Same here
@arcticcatkickass
@arcticcatkickass 3 года назад
Litteraly wtf
@arcticcatkickass
@arcticcatkickass 3 года назад
@@Jon-ko3vv lol i was actually thinking about charging my upcoming build lol
@Americanmafia1
@Americanmafia1 3 года назад
Regardless of the outcome it was far more entertaining to watch a single person build fabricate beat and work on this jeep then to watch a team of people cunsult a jeep specialist and buy a bunch of bolt on parts and install them in a commercial shop I love your videos and have always enjoyed the content
@BustedKnuckleVideo
@BustedKnuckleVideo 3 года назад
I’m not an expert Cherokee builder so I consulted an expert and spent my money on good parts 🤷‍♂️
@exhaustfumes927
@exhaustfumes927 3 года назад
@@BustedKnuckleVideo how far did that get you judging by the video the zj did most of that with ease
@andrewnicely8468
@andrewnicely8468 3 года назад
The negative comments have no place here. They are 2 cool dudes that put together 2 cool rides and hours of great content. Stop complaining about how it happened or who did what and enjoy it!
@Americanmafia1
@Americanmafia1 3 года назад
@@andrewnicely8468 it was a compatition when comparing things it tends to matter
@exhaustfumes927
@exhaustfumes927 3 года назад
@@andrewnicely8468 if you are speaking about my comment it wasn't meant to be rude. He consulted an expert and bleepin built Some.
@colindowns3691
@colindowns3691 3 года назад
What you can do when welding parts like a driveshaft that are too large to clamp is grab one of those hood or engine ground straps from Pull a Part (or from your own vehicle). Generally they're a woven copper strip that is fairly long. Then loop it around your driveshaft, rollcage, etc. and clamp onto that with your ground clamp. Makes it real easy to clamp onto big or awkward parts and provides a good ground. Alternatively you can strip the sheathing from some large extension cables and wrap all the copper strands together, but that's more messy and destructive.
@MSTrishRN
@MSTrishRN 3 года назад
Matt, you are teaching me so much. I just wish I could fabricate like you do.
@bleepinjeep
@bleepinjeep 3 года назад
You can do it, all my experience is out there for everyone to learn!
@sonnicman
@sonnicman 3 года назад
You can. Start small and practice practice practice. During this pandemic, more people are learning a skill online than just about any other time in history. As Matt stated, the information is out there, especially in videos. Watch, practice, and repeat.
@BabyCharlotteschannel
@BabyCharlotteschannel 3 года назад
@@sonnicman yes, but luckily this Plan-demic is not nearly as dangerous as the other common flu viruses that we've been dealing with for years and years now. I don't know of a single person who has died or even been hospitalized from this thing. As usual, it's all about power and CONTROL.. *And money 💰..
@mcanderson3511
@mcanderson3511 3 года назад
@@BabyCharlotteschannel We buried my nephew on Friday, but as long as it doesn't affect you, that's fine. Maybe keep the disinformation to yourself, as it has absolutely ZERO to do with this video.
@Lray4x4
@Lray4x4 3 года назад
That rear axle was setup for a TJ that is why the brackets didn't line up as you found out. A TJ rear axle isn't a direct swap into a ZJ, the coil spring perches and control arm bolt in locations are completley different.
@GoatOffroad
@GoatOffroad 3 года назад
SO awesome to see you building again! One of my favorite videos!! Love to see how creative you got putting this beast together. Those wheel caps! The Dr is in the house 🤣. Now I wanna go lay some worms (weld) 😄. ❤️🐞
@BobbyB910
@BobbyB910 3 года назад
Matt forgot one simple Jeep rule.....if you have a sawzall you can fit any size tire
@banzaiib
@banzaiib 5 месяцев назад
Thanks a lot... now, I'm workin' on a cheap jeep '97 xj. You've inspired me!
@trail-wolf4x4
@trail-wolf4x4 3 года назад
That axle swap though, need an 8.8 for my ZJ
@SC-ti9cj
@SC-ti9cj 3 года назад
Love that you did it all on your own! Fabrication, installation you name it you did it!! In your shop at home. Awesome! Your competition had a handful of guys helping. Which is cool, but You Da Man👍
@bleepinjeep
@bleepinjeep 3 года назад
Thanks man!
@ryanmontgomery1622
@ryanmontgomery1622 3 года назад
best build series ive seen in while great job!!
@gzrgldr8288
@gzrgldr8288 3 года назад
That ZJ looks awesome. Love your fabrication skills.
@brianschmidt2747
@brianschmidt2747 Год назад
Awesome simply awesome thank you I have learned a lot thank you teacher my bleepinjeep friend
@byron16x
@byron16x 2 года назад
Thank you for explaining how and why you're doing some things! As a noob it's nice to see it being done and also knowing why you're doing it. 10/10
@brendanjeans4423
@brendanjeans4423 3 года назад
Damn that looks so good!
@Codyhainley_fishing
@Codyhainley_fishing 3 года назад
I can’t be the only one here thinking that zj turned out absolutely badass! Makes me think about reading my wj for one
@bleepinjeep
@bleepinjeep 3 года назад
Thanks man!
@ARKujo
@ARKujo 3 года назад
It was badass! After watching busted knuckles video, its going to be so exciting! Cant wait for the next video!!
@saturnsl89
@saturnsl89 3 года назад
Looks good! Good job Matt 👍
@JesusIsTheLightAndway
@JesusIsTheLightAndway 3 года назад
Gotta love these east Tennessee hill rigs doin work son!!##
@anthony3212
@anthony3212 3 года назад
Hell yeah this series is awesome. Helps guys that are ballin on a budget do some thinkin. Thank you
@Strizzle81
@Strizzle81 3 года назад
Another killer video...cant wait to see it wheelin!
@bubbie3533
@bubbie3533 3 года назад
I can't wait for part 3. I'm watching your videos and the ones over on Busted Knuckles. 👊👍
@sonnicman
@sonnicman 3 года назад
Outstanding Matt! I really enjoy watching these video's from an engineering perspective, but what I love most is that it clearly demonstrates your ingenuity and creativity and that by spending more on sweat equity instead of money you can have something that's just as good if not better!
@bleepinjeep
@bleepinjeep 3 года назад
Thanks!
@adamshartley
@adamshartley 3 года назад
I love it man I am looking to do about the same. Looking for the jeep now. Cheep cheep cheep. Thanks for the motivation!
@ustinates335
@ustinates335 Год назад
Holy smokes thats the cleanest pull a part yard I've ever seen! I wish my driveway looked that good.....
@bleepinjeep
@bleepinjeep Год назад
You and me both!
@thewheel2023
@thewheel2023 3 года назад
Absolutely Great! Exactly what i woulda done with talent, tools, cash!!! Lol great stuff
@BerserkerCatSplat
@BerserkerCatSplat 3 года назад
Great budget build! Nice to see examples of where some DIY effort and ingenuity can save cubic dollars. That XJ will have its hands full trying to beat this rig!
@phillims1
@phillims1 3 года назад
Awsome job! As usual
@jeremyray8705
@jeremyray8705 3 года назад
Man, I love this jeep build!
@ke6bnl
@ke6bnl 3 года назад
I did the hockey trick for the winch stop, I put the cable through an aluminum plate same diameter as the hockey Puck then drilled the Puck for the cable then install the hook makes a perfect stop for the winch
@ThePitt
@ThePitt 3 года назад
Really enjoyed this! One of the best videos you've put out in a long time!
@bleepinjeep
@bleepinjeep 3 года назад
Thanks
@frankrizzo367
@frankrizzo367 3 года назад
I usually dont watch videos this long. I enjoyed the whole video and learned a lot. Thanks!
@nealesmith1873
@nealesmith1873 3 года назад
Great video, lots of good info!
@aaronb7990
@aaronb7990 3 года назад
Your gonna kill it Matt!!!
@zxej6879
@zxej6879 3 года назад
The Jeep ZJ is a perfect sized offroad vehicle. It fits a lot of places that our 4door 4wd pickups don't fit. But the ZJ is roomy enough for my 6'4" son. I prefer the longest control arms available. For that extra articulation.
@thewheel2023
@thewheel2023 3 года назад
Truely truely great stuff
@alanwheelock1460
@alanwheelock1460 3 года назад
Man Matt you rock , this was epic. !! Cheap rocks
@bleepinjeep
@bleepinjeep 3 года назад
Thanks Alan!
@Shane7son
@Shane7son 3 года назад
Yea a new video I'm so excited for the new video
@chadwelsh9350
@chadwelsh9350 3 года назад
Very nice ZJ. Solid build.
@zman92630
@zman92630 3 года назад
I wish I had 10% of your knowledge. And tools. Great vid!
@ARKujo
@ARKujo 3 года назад
love the custom fabrication you do. Wish i could do the same but i dont have a quarter of the fabrication equipment you have plus I would have screwed up the yoke swap. That was genius!
@tutorialescarrengo4208
@tutorialescarrengo4208 3 года назад
Amazing!! Greetings from Mexico!
@semtibesiktas
@semtibesiktas 3 года назад
Very well my friend. Good job
@chiefexecutive
@chiefexecutive 3 года назад
I love this, thing looks badass man
@DonkeyStomperProducts
@DonkeyStomperProducts 3 года назад
Good Job Followed all the build..
@StormbornJKU
@StormbornJKU 3 года назад
The level of ingenuity and fabrication and just overall creativity is off the charts. I wouldn’t have thought to do half of the stuff you did in order to save cash and get parts to work. But it’s an awesome little challenge / build if you’ve got throwaway money like that! I don’t even have money to fund my one build as it is. Would definitely be cool to do this though.
@robertlindseyjr8396
@robertlindseyjr8396 3 года назад
You should get the Volvo and make a gambler 500 rig and bring it out to Oregon and run it in the O.G. Gambler 500
@Daniel__Bec
@Daniel__Bec 3 года назад
I feel like I will always love zjs, they're super cheap, solid front and rear axles, I love the v8 in them, bout my first one for 500, bought some wheels and a 5inch lift for another 800 and loved it
@Formerlywarmer
@Formerlywarmer 2 года назад
Nice work
@250zxSkeeter
@250zxSkeeter 3 года назад
Great explanation for arm length!
@HarryCane305
@HarryCane305 2 года назад
nice build tips!
@jaym6266
@jaym6266 3 года назад
Spent hundreds of hours at Pull-A-Part, love that place, and veterans get in free!! Love this challenge, and look forward to the finale!
@tundra4wd
@tundra4wd 3 года назад
Love you man 😍
@lalogarcia7172
@lalogarcia7172 2 года назад
Dang that’s the cleanest junkyard I’ve ever seen. An the vehicles are in good shape as well. The junkyards I’ve been too are dirty messy an the vehicles kids go out an just bust up the vehicles an destroy them. Let me know bleeping jeep I got a 95 gmc jimmy I wanna turn into a rock crowler but I’m on a shoe string budget. My trucks under construction right now trying put the prices back together from a fender bender I got into back in October. I can’t afford all the bells an wissles like all these nice rigs I see out on the trails. But I love wheeling an wanna be able to get back out on the trails agin . Thanks bleeping jeep.
@anthonylee2099
@anthonylee2099 2 года назад
Great Video Matt. I love how your fabricating parts and putting it on. Explaining every steps and why. You’re like a lot of us garage monkeys thst doesn’t have a lift and using a floor jack/ jack stands. Laying on your backs. Love Colts video too cuz both of you represents us mechanics! If I could, I would buy a lift, but No garage height.! 🤙😎
@dustincecchi3988
@dustincecchi3988 3 года назад
I'm new to the wheeling and jeep world but I feel that I'm in it for the long run. Absolutely love the rig I have but I can't lie.... I keep wanting more
@francisbrackney2061
@francisbrackney2061 3 года назад
Hey Matt. I have learned that if you clamp the spring directly across from the spot where you are heating it, it bends a little better. And if you dunk it in a bucket of oil while it is still hot, it will help to be temper the steel. The same as is done with making tools. Just be careful with the hot oil not to hurt your self or catch anything on fire. I recommend doing it outside in a safe place.
@XJ_Crawlerz
@XJ_Crawlerz 3 года назад
Dude that thing is so sick!! My XJ is almost done, 6.5" long arm 3 link kit from IRO, 35" goodyear MT Kevlars. So stoked to go crawling
@xmo552
@xmo552 3 года назад
I picked up and MJ and I'm thinking of going to 6.5". What did you do in the rear and did you have to install a slip yoke eliminator?
@holysmokeDC
@holysmokeDC 3 года назад
Totally Spitzer ZJ 👌 👍👍
@MrBmth90
@MrBmth90 3 года назад
I wish I could have your skills, knowledge, & the most important of all, the patience! 👍🏼
@bleepinjeep
@bleepinjeep 3 года назад
You can, just watch every video I've made... thats all the skill I have!
@xmo552
@xmo552 3 года назад
@@bleepinjeep That Volvo... Have you seen people use the rear Dana 30 traction aid in the front of a Jeep with a Dana 30? And, supposedly you can rig it and possibly use it in the Dana 35. I scooped up an 88 Comanche. I'm thinking of going spring over in the back which nets 5.5" - 6.5". Up front I'm thinking some control arm drop brackets will serve my purposes. How does your short arm set up at the oe pivot locations ride?
@rickmarquart3277
@rickmarquart3277 3 года назад
Can't wait. I hope Matt wins!😂🤣😂🤣🇺🇸
@user-ej5lm7ow7w
@user-ej5lm7ow7w 3 года назад
very nice .
@thelastword7203
@thelastword7203 2 года назад
This inspires me to learn how to weld and I really really wanna do it now
@tiredofinsanity
@tiredofinsanity 3 года назад
Man that valve stem tool is bad ass! Of course I've gotten really good at remembering to put them in before I get the tires all bolted in...ask me how I got good about remembering though😂
@bleepinjeep
@bleepinjeep 3 года назад
You need one of these! No need to remember.
@tiredofinsanity
@tiredofinsanity 3 года назад
@@bleepinjeep tell me about it 😂 I'll pick one up.. just cuz...I'll put in my "wuzziss" drawer. Full of mostly homemade tools and anytime someone goes in there that's what they say... what's this? Im liking the build takes me back to the days when I couldn't afford anything and had to make stuff work. Sleeved track bars... extended links. Very entertaining!
@sonnicman
@sonnicman 3 года назад
I agree Jared. Gotta get me one of those for Christmas lol.
@andrewnicely8468
@andrewnicely8468 3 года назад
This is going to make for great content!
@bleepinjeep
@bleepinjeep 3 года назад
Already is! You got some watching to do!
@andrewnicely8468
@andrewnicely8468 3 года назад
I’ve now caught up. Man I’ve got to say your good shit. Your a true Jeep guy and off-roader. Keep it up.
@Triplenickelmotorsports
@Triplenickelmotorsports 3 года назад
having the right tools and knowlege is key
@MrDudeCZ
@MrDudeCZ 3 года назад
love it!
@Milsparro
@Milsparro 3 года назад
Man you put so much work into the arms and I've got preowned fully adjustable short arms for a ZJ just taking up space in my garage after I found a cheap roller with a long arm kit last year :)
@sandywert1483
@sandywert1483 3 года назад
Wanna sell them to me? I’m building my zj rn
@huntersagoon
@huntersagoon 3 года назад
Awesome build matt!! Would like a little explanation on your steering in the future if possible
@Milsparro
@Milsparro 3 года назад
I second that. 7.5in on the factory y-link on my ZJ and that's next.
@timetable620
@timetable620 3 года назад
You have to leave the tire out of the budget. That is over$1000 in just rubbers
@wesgray7906
@wesgray7906 3 года назад
This is by far the beat goofy comedy you have applied to any of your videos! 😂😂😂 hood content tho
@Kaiju_Universe385
@Kaiju_Universe385 3 года назад
Sick ZJ build! Don’t see a lot of these built up AND taken off road
@AZWESTSIDEWHEELERS
@AZWESTSIDEWHEELERS 3 года назад
Great video series. I've been looking for something to beat up on a little but still crawl like our jku on 37's just cheaper haha. .. soo I bought a Zj or 2 😬 5.2 v8 should be a fun build for our channel thanks for the inspiration Matt.
@sloppyoppie
@sloppyoppie 3 года назад
25:04 genius. Gonna go great with my skate wheel drive shaft true-er'r.
@ryano8613
@ryano8613 3 года назад
ALWAYS STAND A TIRE UP WHEN FILLING WITH AIR, SEATING A BEAD, ADDING AIR OR ANY AIRING OF ANY KIND. The sidewall and/or bead always blows first if a failure occurs and very rarely does the tread blow on inflation. Therefore if a failure is in the tires future and your sitting on the floor with it on its side ( like bleeping here( even with a BL wheel) it will become an instant anti gravity rocket and you or HEED are just in the way.
@camronboldenow2973
@camronboldenow2973 3 года назад
What I’ve done to make a shock longer is a coupler nut and a stud and screw it on the top of the shock
@bleepinjeep
@bleepinjeep 3 года назад
Thats cool, what size is it do you know?
@davidjosemaloofrivera7056
@davidjosemaloofrivera7056 3 года назад
@@bleepinjeep if I'm not wrong it's 3/8"
@xmo552
@xmo552 3 года назад
They make and sell those commercially
@justinvillarreal9738
@justinvillarreal9738 3 года назад
That was fun
@kerrykeim8484
@kerrykeim8484 3 года назад
Sweet!
@Bluelightbandit
@Bluelightbandit 3 года назад
Give a man a welder and some scrap metal and he can do anything!
@kolorkolor1421
@kolorkolor1421 3 года назад
Waiting on episode 4 👍
@bleepinjeep
@bleepinjeep 3 года назад
Coming next week!
@erichughes9098
@erichughes9098 3 года назад
Your looking good 😎👍
@wake_nbake93
@wake_nbake93 3 года назад
i love ZJ!
@JShelton2345
@JShelton2345 3 года назад
Dude! I actually got the rear seats out of that Red Limited GC, there was a manual 4.0L ZJ there last time I went as well.
@xmo552
@xmo552 3 года назад
And here she lives again
@terrykyees
@terrykyees 2 года назад
I am a chevy man always have been but i must say them jeeps kick ass
@papawed489
@papawed489 3 года назад
Does look good
@kyferez1
@kyferez1 3 года назад
love the detail on this vid! Get even more detailed next time!
@patriot1902
@patriot1902 3 года назад
That valve stem tool looks like the CO2 bolt gun the bad guy on No Country for old men.
@street_wise_gamgee
@street_wise_gamgee 3 года назад
i built my 5spd zj for under 2k years of searching an gathering parts its now sitting on 6 inches of lift 33 ltbs ford 8.8 artec trussed and locked with 488s rugged ridge sye and one off built front bumper. its been a long road but its def one of a kind and super cheap.
@jamesholguin9327
@jamesholguin9327 3 года назад
Where is your pinion angle at?
@street_wise_gamgee
@street_wise_gamgee 3 года назад
@@jamesholguin9327 off the top of my head not sure ill have to check i just installed a sye
@overriot5617
@overriot5617 3 года назад
i have the same jeep and this is what ive been saving for becuz this is rely coles to what im going to do
@marka.2715
@marka.2715 3 года назад
Matt, I'll have to say I appreciate your build more than Busted Knuckles due to the fact that you did yours with no help where he had a group helping him. That ZJ turned out sick! Might sell my WJ to get one 🤔
@BustedKnuckleVideo
@BustedKnuckleVideo 3 года назад
His wife was helping 🤷‍♂️😂
@bleepinjeep
@bleepinjeep 3 года назад
Wj's can be cool too i bet!
@marka.2715
@marka.2715 3 года назад
@@BustedKnuckleVideo I'm not knocking you. I watched your video and it was good.
@marka.2715
@marka.2715 3 года назад
@@bleepinjeep WJ is ok. I have it lifted and locked. I'm just not a huge fan of the "rounded" look of the WJ. Always been a square body guy.
@xmo552
@xmo552 3 года назад
@@marka.2715 Build the DubJ
@nathansmithjr8673
@nathansmithjr8673 2 года назад
That is why I went with a long-arm kit on my zj
@jacobkoch5806
@jacobkoch5806 3 года назад
I died when you said " that things beef!"
@davishunt3018
@davishunt3018 3 года назад
turned out looking like my 95 Zj haha except the nice ass axles you got for cheap!
@tompenny8352
@tompenny8352 3 года назад
I was always under the impression you should take caster angle after zero'ing angle finder on the sill, not a workbench. Good video though!
@robhughes1544
@robhughes1544 3 года назад
Damn I have a Flowmaster 10 I pulled off of my 4.7 WK I would have shipped to you for free! I like the message on the tie rod too👍.
@bleepinjeep
@bleepinjeep 3 года назад
Lol. Shipping would be more than $14
@consaka1
@consaka1 3 года назад
Not bad at all.
@adamturk8656
@adamturk8656 3 года назад
cool
@tinatpasselepoivre
@tinatpasselepoivre 3 года назад
It goes without saying that kind of home brewed mods (especially the springs!) should be kept out of the open roads and reserved for slow trail and rock crawling Nice craftmanship tho
@Fix_It_Again_Tony
@Fix_It_Again_Tony 3 года назад
Yeah the springs were the sketchiest part to me. He mentioned it quickly in the video, but for anyone that didn't catch it spring steel gets heat treated to make it what it is so when you heat it up to glowing red hot a section of that spring has lost its heat treatment. It will be prone to breaking in this area. I agree it's fine for a trailered off road only build if you absolutely can't afford the proper springs, but for most people they should buy the correct springs and then they will also get the correct rate. He said the ones he used in the rear were front springs originally (stiffer). Not only does that affect the ride quality, but will affect articulation and can affect stability. It'll get you out on the trail, but save up a little money for the correct springs.
@jennBourne
@jennBourne 3 года назад
I'm just curious why you didnt make a long arm kit. I've seen you use a plasma cutter. Arms just need to be some DOM adjusters and poly bushings.
@jeffreyadiska5744
@jeffreyadiska5744 2 года назад
What did you use for rear control arms on the zj crawler whats the length of upper and lower rear control arms?
@Garrett053
@Garrett053 3 года назад
You are the first person i have seen that get correct auto texting on y.t. guess you have very accurate speech then :D Also, cool build!
Далее
How-To Build a Rock Crawler ZJ for $5,000 Total
32:23
Просмотров 371 тыс.
We Surprise my Dad with his high school truck!
13:53
Просмотров 1,4 млн
Cheapest Jeep Builds! | Dirt Every Day | MotorTrend
18:21
Jeep ZJ Build for the channel. Didn't stay new long!!
16:59
Pull-A-Part Cheap Jeep Challenge SHOWDOWN XJ vs ZJ!
32:58
ГЕЛИК из ДЕРЕВА!🌳 #shorts
0:37
Просмотров 872 тыс.