Тёмный

Chevy nova disc brake conversion 

Hatch's Recreational Engineering
Подписаться 10 тыс.
Просмотров 11 тыс.
50% 1

we install all brand new disc brakes and front suspension on the 1970 junk yard rescue nova project. This '70 project is one step closer to getting the engine set back in it and making a run at the race track.
DISC BRAKE KIT
www.summitracing.com/parts/ws...
UPPER AND LOWER CONTROL ARMS (with bushings + ball joints)
www.partsgeek.com/sr4mjkz-che...

Авто/Мото

Опубликовано:

 

21 окт 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 48   
@Novarider72
@Novarider72 9 месяцев назад
Just so you know, the next time. When you use that Spring compressor tool and it gets stuck Between the Spring, you need to loosen the lower castle. Nut on the spindle, you don't have to take the nut all the way off. You just gotta loosen it to where it's on a few threads. And then get a floor Jack and slowly let the lower a arm down. So that the Spring will expand and when the Spring expands just enough, you'll be able to slip that tool out between the Spring.
@boatnut64
@boatnut64 9 месяцев назад
Cut a piece of 1/2" flat bar, just longer than the coil is wide (extra 1/2" on each side) and drill a 1/2" hole at center... Run a length of 1/2" "All Thread" down through the shock tower. Bolt the flat bar in the spring, 2 coils up from the bottom, and start tightening at the top. Use some WD40 on the threads, so it doesn't gall... Takes me 15-20 minutes to install a spring. 💪💪💪
@FreeSwimmer
@FreeSwimmer Месяц назад
I just came in from installing a complete new control arm set in my 1970 Nova. I already have disc brakes, however that set looks great. Im gonna rebuild the control arm set, I took off, but decided to install new on the car. I took easy way.
@Novarider72
@Novarider72 9 месяцев назад
Bro, you need a socket that'll fit over that dust cap. So you can smack it on the back of the socket so that that dust cap goes evenly on into the rotor.
@talesofanasphaltjockey
@talesofanasphaltjockey 9 месяцев назад
Man I was a nervous wreck watching your son messing with that spring ... yikes . Making great progress , can't wait for the next installment .
@jeffallen3382
@jeffallen3382 9 месяцев назад
Leave the lower control arm off, take a threaded rod through the shock upper hole down to the spring pocket. As you compress the rod, it will suck up the spring and the just attach the lower control arm bolts. This is how the service manual has you installing these springs.
@MRobichaud99
@MRobichaud99 9 месяцев назад
Yes threaded rod does it for me EASILY. I have to admit after buying 2 different spring compressors, I did kind of laugh when I saw what you were going though. Although it wasn't as funny, somehow, when I was going through it. Now you know. LOL Keep up the good work!
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
You definitely live and learn lol. Next time i will absolutely try it through the top. Thanks for the tip! Glad you enjoy the content!
@RaysGarage
@RaysGarage 9 месяцев назад
Front end is looking great Dan, I choose coil overs to avoid everything you had to endure! I too need to install a trunk block-off plate so looking forward to how you make out with that. Cheers, Ray
@KrishnaDraws
@KrishnaDraws 9 месяцев назад
Good progress! I can't believe you only have under 2K followers! Great content!
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
Thanks! Glad you enjoy the videos! I am confident that if i continue to produce content the channel will hopefully grow. Its ok though because the subscribers/viewers that I have are so awesome and provide such awesome positive reinforcement. Thannks for following along and glad you enjoy the content!
@edsmachine93
@edsmachine93 9 месяцев назад
Nice brake conversion. I like the nice new fresh front end rebuild. Thanks for sharing.
@skeeet5758
@skeeet5758 7 месяцев назад
The easiest the fastest way to get you a piece of all thread welding up on one end and tighten it up on the other. Run it down through the shock mount in the center. It's straight love if you got the dog box off of it
@Novarider72
@Novarider72 9 месяцев назад
I had the same issue happen with me. I couldn't get the tool out between the Springs so I loosened the lower castle nut and lower the arm. As far as I could so that the Spring would expand just a Enough so I could slip the tool out between the Spring.
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
I would have tried this but with there being no weight in the front of the car I did not trust this method to work. If the car had a motor in it I 100% would have tried that.
@Novarider72
@Novarider72 9 месяцев назад
The method I told you to do would have worked with or without a motor because all you're trying to do is fully expand the Spring as much as possible.
@jamesseekford4928
@jamesseekford4928 3 месяца назад
Love these Nova videos
@thehoule70
@thehoule70 9 месяцев назад
Yes I’ve done that to I used the outside spring compressors I just cut them down and grabbed the bottom 3 coils and it worked love the kid helping you that was awesome when he said it’s almost out then it couldn’t lol that was priceless to see and him helping you I have 4 boys and 4 girls they helped me in the garage all there little lives what a difference in them helping me I couldn’t do some of the stuff without them ,love your car I’ll be doing the same thing to my 71 Acadian got a ton of used and new parts including a 355 vortec motor built racing hoping for 450 hp 12bolt 3.73 posi 200r4 2400 stall Calvert caltracs and mono leafs tubular a arms to it’ll be nice once it finished just going to leave the body original
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
yea my kids working with me is the best! That sounds like a sweet project you got there. Sounds like your suspension setup will be very similar to what i am running on my '69.
@olikat8
@olikat8 7 месяцев назад
Sometimes, it's more cost effective and/or a nice upgrade than re-doing old stuff. No shame in the truth, I've done it both ways. My Valiant is factory UCA with the Moog offset bushings, with the rear bushing spun 180 degrees out to give it more camber. My '69 Swinger? Tubular UCAs' with grease-able poly bushings. The Valiant is a sedan, I like it being an example of 'optimizing on a budget' and realize that it'll never be worth what the Swinger is worth, so it makes sense to approach at two different angles.
@skeeet5758
@skeeet5758 7 месяцев назад
They do make a open in wrench it's like a ratchet with a hole in the center you can do it all by yourself and make it for tightening up all thread if it's new it works really good but it's not really good to break something loose it's made for tightening only so you want to use an open-end box wrench or take a breaker bar after you get it tight and just cut it off and then loosen it with a breaker bar. All thread is cheap but your fingers you need those forever... Once you figure that out you can slap that together in no time works for almost any spring
@rcking911
@rcking911 9 месяцев назад
Can't wait a week for the next one
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 8 месяцев назад
Thanks man! Glad you enjoy them!
@Z28Racer1
@Z28Racer1 7 месяцев назад
Use coil straps next time. Take the coils to a shop, they compress them and strap them you install them then cut the straps. Sorry I couldn't help sooner. Great job on the car though. It's looking good
@titansville1
@titansville1 5 месяцев назад
Get your piece of 2-in tube drill a hole through it run some 3/8 threaded all the way down turning with a wrench
@lordsauto
@lordsauto 9 месяцев назад
Love the vids.
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
Thanks man! Glad you enjoy the videos!
@henrycopeland133
@henrycopeland133 5 месяцев назад
Use a threaded rod with washers and nuts run from top to bottom and tighten and loosen it's a lot easier.
@turkishmurphy
@turkishmurphy 7 месяцев назад
Ls camaro brakes are the answer and you can use the stock drum brake spindles
@steelcitycaprice.899
@steelcitycaprice.899 9 месяцев назад
Nice upgrades and I too own the bearing 9000 installation tool owned it for years and works great. I'm looking to do the same upgrades on my 72 elcomino and its good to know jegs has bolt on kit. Great post!🏁🏁🏁
@skeeet5758
@skeeet5758 7 месяцев назад
Use an impact you got the car jacked up enough that you can get it to tighten up you'll have to hold it with a long open end box end. If you can get it to hold in tight on something you're better
@rockyduke5758
@rockyduke5758 9 месяцев назад
Good way to start my morning with a nova video lol can u share the part numbers for the disc brake kit. Awesome job as aways.
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
I have links to the parts I use in my video descriptions. You can catch the link to the jegs listing for the kit I used there. Thanks for watching!
@titansville1
@titansville1 5 месяцев назад
Next time put some weight on the front end of that car but engine block with some heads just stack the weight on there you won't have to have those things have a good one Good job
@NeilPost71
@NeilPost71 9 месяцев назад
Ha! My wife is watching with me. She said with that hair and mustache you look like David Arquette in Scream. Then scream walks into the garage😂. New subscriber really digging your stuff!
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
My wife hates the mustache lol. Thanks for watching Neil glad you enjoy the content!
@titansville1
@titansville1 5 месяцев назад
Watch a few episodes of DD's speed shop he put coils in me 67 Camaro
@kevinvansandt9117
@kevinvansandt9117 9 месяцев назад
Thanks Dan I'm going to look for that setup for my nova , do you know if you can run the 14 in rally wheels with those disk's
@xJoKeRsAssAssIN
@xJoKeRsAssAssIN 9 месяцев назад
I'm thinking of buying both kits you have linked. What exactly do I need to order for new steering arms? You stated that you had your own but if I had to order what exactly am I looking for? Thanks
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
Just a stock steering arm is fine. The kit just doesn’t come with one. The pair I used I separated off of a drum brake spindle a year or so ago. Right stuff detailing makes some pretty good repop ones (running a pair on my ‘69). Heres the link through summit racing. www.summitracing.com/parts/rsd-dbsa02?seid=srese1&gclid=CjwKCAjwkNOpBhBEEiwAb3MvvfbOJ1cF_ADiH_LYzbfqTLdzZ82O1aTlt6HyOeJ2X0JbjqFaimFw2RoCBhoQAvD_BwE
@johnnelson5659
@johnnelson5659 9 месяцев назад
What size are the nice looking front tires and rims
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
15 x 4 165/80 tire
@lordsauto
@lordsauto 9 месяцев назад
Good God lol
@miked.7555
@miked.7555 6 месяцев назад
What conversion kit is this?
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 6 месяцев назад
There is a link in the description of the video for it. It is a Western Chassis Disc Brake Conversion Kits SWBKS6874
@joeyramirez6355
@joeyramirez6355 9 месяцев назад
SMH. It's too easy these days. But I'm sure the salvage yards are dried up of good, reusable inventory.
@hatchsrecreationalengineer1997
@hatchsrecreationalengineer1997 9 месяцев назад
Believe me I almost ALWAYS reuse/rebuild original parts but in this case my deadline to get the car done is rapidly approaching and what some guys were charging for used control arms that needed to be rebuilt weren’t that shy away from what this kit ran me. Salvage yards in the east here are usually just super rusty junk at this point. Salvage yards out west are definitely sporting some usable pieces/projects
Далее
1971 Nova Front Disc Brake Conversion
3:48
Просмотров 3,6 тыс.
EVOLUTION OF ICE CREAM 😱 #shorts
00:11
Просмотров 4,8 млн
ФОКУС С БАНАНОМ🍌
00:32
Просмотров 362 тыс.
New engine for the NOVA!!!
20:08
Просмотров 10 тыс.
Salvage to Savage, '70 Nova Revival
48:07
Просмотров 211 тыс.
Cheap Rear Brake Upgrade for your GM 10 Bolt.
13:19
Просмотров 560 тыс.
62 Impala Disc Brake Conversion
18:35
Просмотров 33 тыс.
HOW TO: BIGGEST wheel/tire combo on stock NOVA
14:01
Просмотров 51 тыс.
Revamping the junk yard '70 Nova!!!
16:01
Просмотров 9 тыс.
Damaschilar ham qattiq bosarkan…
0:13
Просмотров 505 тыс.