It should be noted that the 1" slip to 3/4" thread will not adapt to the garden hose. PVC is NPT. Garden hose, I think, is NIFT. They are different thread sizes and you may need a special adapter.
For the connection to the pvc, I think you are saying we need a 3/4” female NPT thread with 3/4” barb (for hose and clamp), right? Then the other connection is a 3/4” female GHT thread with 3/4” barb (for hose and clamp). I think the video did not clarify that but that is what I am seeing is needed since the garden hose and pvc threads are GHT and NPT respectively. Thanks!
Great system, just one note about gluing, always use primer as that creates a chemical reaction that melts the two pieces together and put glue on both ends. Give it a twist to get contact and wipe the excess off on the outside as it will form a crust leaving the inside to keep melting the fitting making it brittle. Enjoyed your video
I’m following your system exactly but ran into a problem. I drilled a hole 3/8 but it was too big. I can put the nipple in and pluck it out with no effort. So I went down to 5/16 but the nipples broke with no effort. I think I ordered cheap Chinese crap. Is there any way you can share your nipple order?