Chill your Ice Barrel 500 with this Easy DIY

Подписаться 47 тыс.

Просмотров 15 тыс.

50% 1

DMJR.co/IceBarrel (Discount Code "MAUS" for an exclusive Discount)
In this video I walk you through a simple and inexpensive DIY Chiller option for the Ice Barrel 500 (it will also work with the Ice Barrel 300). This will help keep your water clean and cold at all times. This is a completely redesigned Kit that will also save the most space.
Here is the New Kit: dmjr.co/500DIYKit
#icebarrel #coldplunge #diy
Thank you for Watching!
Like, Subscribe, & Share with a Friend!
dmausjr.com
I made a course showing exactly how I make a great living as a small content creator, check it out. :)
"The Creators Playbook!"
DMJR.co/Playbook
***********Links & Discount Codes***********
**COLD PLUNGE**
Ice Barrel Code “MAUS” dmjr.co/IceBarrel
Plunge Code “MAUS" or "DMAUSJR" dmjr.co/Plunge
Desert Plunge "MAUS" dmjr.co/DesertPlunge
Edge Theory Labs Code “DAVID” dmjr.co/ETL
ModTub Code “MAUS” dmjr.co/ModTub
Ice Up Industries Code “MAUS” dmjr.co/IceUp
Box Plunge Code “MAUS” dmjr.co/BoxPlunge
Polar Monkeys Code "MAUS" dmjr.co/PolarMonkeys
**DIY Kits**
All DIY Kits: dmjr.co/Amazon
500/300 DIY Kit: dmjr.co/500DIYKit
1/4 HP Cold Plunge Kit: dmjr.co/QUARTERHPKIT
1/2 HP Cold Plunge Kit: dmjr.co/HALFHPKIT
1 HP Cold Plunge Kit: dmjr.co/ONEHPKIT
DIY Sauna Kit: dmjr.co/DIYSAUNA
**SAUNA**
Sweat Tent Sauna Code "MAUS" dmjr.co/SweatTent
Redwood Outdoors Code "MAUS250" dmjr.co/RWO
Sisu Sauna Code "MAUS" dmjr.co/Sisu
**SLEEP**
Eight Sleep Code "MAUS" dmjr.co/8Sleep
MindLax Code "MAUS" dmjr.co/Mindlax
**MOVEMENT**
Kineon Code "DMAUSJR" dmjr.co/Kineon
Hooga Code "MAUS" dmjr.co/Hooga
Freak Athlete GHD Code "MAUS" dmjr.co/FA
Vitruvian Code "MAUS" dmjr.co/Vitruvian
Katalyst EMS dmjr.co/Katalyst
BODi dmjr.co/Bodi
Lumen Code "MAUS" dmjr.co/Lumen
**OPTIMIZATION**
Blokes (for Men) Code "MAUS" dmjr.co/Blokes
Joi (for Women) Code "MAUS" dmjr.co/Joi
**NUTRITION**
Armra Colostrum Code "MAUS" dmjr.co/Armra
Redmond REAL Salt/ ReLyte Code "MAUS" dmjr.co/Redmond
Masa (No Seed Oil) Chips Code “MAUS” dmjr.co/MASA
FroPro Snacks Code “MAUS15” dmjr.co/FroPro
Primal Beef Code "MAUS" dmjr.co/PrimalBeef
Create Creatine Gummies Code “MAUS” dmjr.co/Create
Cowboy Colostrum Code "MAUS" dmjr.co/CC
**SUPPLEMENTS**
BIOptimizers Code "DMAUSJR" dmjr.co/Bio
Momentous Code "MAUS" dmjr.co/Momentous
xEndurance Code “MAUS15” dmjr.co/XND
NaturALL Living Code “MAUS” dmjr.co/NatyLife
Heart & Soil Code “MAUS10” dmjr.co/HeartandSoil
**DRINKS**
Ketone-IQ Code “MAUS” dmjr.co/HVMN
PWR Lift Code “MAUS20” dmjr.co/PWRLIFT
SAPs Code "MAUS" dmjr.co/Saps
Slate Milk Code “MAUS” dmjr.co/Slate
**GEAR**
TYR Code "MAUSFGS" dmjr.co/TYR
Legends Code "MAUS" dmjr.co/Legends
Haven Bags Code “MAUS” dmjr.co/Haven
**CONTACT ME**
Email: dmausjr88@gmail.com (FOR PARTNERSHIPS)
RU-vid
dmjr.co/SUB
Instagram
/ dmausjr
My Website
dmausjr.com
DISCLAIMER
We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research, always. Some of these links go to websites that are affiliate links where I may earn a small commission if you make a purchase, at no additional cost to you. THIS VIDEO IS MEANT FOR ENTERTAINMENT PURPOSES ONLY.
COPYRIGHT NOTICE
This video and this RU-vid channel may contain copyrighted music and images. Any public, media and any other business usage is subject to business license. Unauthorized usage and publications are prohibited.
© David Maus Jr
Time Stamps
0:00 DIY for Ice Barrel 500
0:37 Everything you Need (DMJR.co/500DIYKit)
3:58 Building the DIY Chiller Kit
7:02 How to Attach the New Setup
9:00 The Difference between this setup and the Original 300 DIY
10:28 Testing for Leaks or Issues
11:59 Connecting you Chiller
15:33 Keeping your Water Clean and Sanitary
18:07 Turning on for the First Time
18:49 Tune Ups and Adjustments
19:41 Using the Active Aqua Chiller
20:45 Other Options

Развлечения

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 213

@DavidMausJr 2 месяца назад

Check out the new Kit! DMJR.co/500DIYKit (it will also work better for the Ice Barrel 300)

@andrewclarke8036 2 месяца назад

Is the 300 as insolated as this one? Would the 1/4 HP be enough for that 300 build?

@DavidMausJr 2 месяца назад

@@andrewclarke8036 It is very similar, but not as much. You may want to up to the 1/2 if you live in a really hot climate

@TexasHeightspark 2 месяца назад

David Thanks for the video. The area we live in I may need to unhook chiller and put in the garage for a couple of weeks in the winter, have you looked into using camlocks ?

@craigkilbytube Месяц назад

also, is there any issue getting the 1/2" danner pump and using 1/2" tubing all around. I think my current chiller is 1/2"

@thehorse8585 Месяц назад

Hey David, thanks for the video! Q: how’s the 1/4 HP holding up since? Would you recommend going up to the 1/2 HP?

@NPow94 2 месяца назад

Incredible build man. I thank God I’ve waited to pull the trigger on ice barrel until now. I’m going with the 500 and following this exact advice. Thanks!

@brandonhenderson3186 2 месяца назад

Thanks Dave. I just bought my IB 500 thanks to your input and help. Looking forward to it arriving in 4 to 5 weeks.

@rodstewart1959 2 месяца назад

You created the video I was searching for thank you for the build, cant wait to get my set up completed !

@DavidMausJr 2 месяца назад

Glad to help!

@kennyfuqua2518 2 месяца назад

Ok....Barrel 500 is on the way and should be at my house next week...Can not wait! I had already purchased all the items in your description from Amazon and used your discount to get an additional $189 off the Barrel (thanks for that). I am setting up in my garage gym and will also need to make sure there are no leaks. Literally like a little kid on Christmas morning! Thanks again for all the great videos.

@wick_opedia 2 месяца назад

Thanks for this. Got the pieces needed and will be setting up this week. Appreciated the work you did to make it easy for us.

@DavidMausJr 2 месяца назад

Glad to help!

@AllenAuman1 2 месяца назад

Awesome set-up. I'm just getting to the point where I'm ready to get all the goodies ordered for the 500! Thanks again, David!! ✌️

@DavidMausJr 2 месяца назад

Awesome!!

@JoshuaHuffman02 2 месяца назад

Love the hose filter. I was thinking about that today. Ha I was very close to rerouting my water softener to the exterior to fill mine up.

@ryancollins9960 2 месяца назад

Three things I would do differently 1. Use plumbers tape on all threaded connections. 2. - use plastic connectors vs brass or metal if possible. 3. Put a ball valve inline before the filter to allow clean out

@DavidMausJr 2 месяца назад

I dont disagree! Couldnt find the pieces on amazon to do number 2. I totally misses number 3! I may add it when I do a full cleanout

@jodyneffable 2 месяца назад

Is there a disadvantage to using metal or brass connections?

@Superstar-cl7we Месяц назад

@@jodyneffable - I like to know the same thing.

@Superstar-cl7we Месяц назад

Why is plastic better?

@ryancollins9960 Месяц назад

@@Superstar-cl7we homogeneous materials. Better to keep like like

@user-lt4jn4zm9m 13 дней назад

Thanks man. I really appreciate the walkthrough on this one.

@jasonmagruder7008 2 месяца назад

Thank you for this video! I am going to run with this set up opposed to the other set up. You are the man! Hope you get to the 100 thousand subscribers soon!

@frankievalle74 2 месяца назад

Another great tutorial. I have the OG IB400 set up more like your original build. I had issues with leaks and noise from the aqua pump, so set it up like your original build with the green filter sitting inside the barrel as well. I would much prefer to keep everything outside of the barrel so that I can move my arms and legs around without bumping anything but am going to enjoy the experience and leave it as is until I change the water. I love the insulation with this model though, so I'll have some thinking to do and may have to start putting a little money to the side for an “upgrade.” The 400 sweats quite a bit. Not sure if you've seen DIY Cold Plunge but he put out a plan for adding another ozone and filtration set up. I have that going as well which really seems to be helping keep the water clean. I have it set on a timer for 30 minutes every night but based on what you mentioned, I might cut that back to maybe 15 minutes a night or every two or three nights.

@lrjd3 2 месяца назад

Cant wait to get one

@davidwaltz6301 2 месяца назад

Thanks Dave!😊

@crewu1216 2 месяца назад

Just bought mine last week! Hopefully it comes soon! Perfect timing

@DavidMausJr 2 месяца назад

Good choice!

@archenemy2242 2 месяца назад

Loving my active aqua 1/2hp chiller paired with the 1000gph pump. Total game changer compared to my last chiller/pump combo. Hottest part of the day and it was only 2° away from set point of 45°. My last setup with the same tub would be 52-53° by about the same time.

@ryanterracino Месяц назад

Which barrel/tub are you using?

@stunningmisadventures 2 месяца назад

I love that you video chat!! That’s awesome!!

@DavidMausJr 2 месяца назад

It’s fun! Love helping people any chance I get!

@danielmarino9536 2 месяца назад

I just wanted to say thank you for your extreme detail. Laying everything out in such a way that we can see it and understands how things are physically working is awesome. For me you took all the guesswork out of actually getting this done. Not sure if you have any idea of the cost to run a tub for a month, I know there are many variables (what tub, where...in sun out of sun...etc, how big of a pump and chiller, where you live such as Florida, in my case the ridiculous California)...but, any estimated range would be good to know. Thanks again for the info.

@DavidMausJr Месяц назад

Thanks for the love and support! Surprisingly I have multiple tubs running 24/7 and dont see any major noticeable difference in my power bill. I could find a way to test it but with a family of 6 and the doors always open my bill was high before hooking these up and its about the same now :)

@sickrickw 10 дней назад

I appreciate this so much!! I’m doing this setup with the 300!! ( patiently waiting for it to ship) but in the meantime I’ve got the 1/4 horse active aqua going into a shitty cold pod and it’s holding temp at 42 f!! In salt lake with 100 degree weather!! Impressive

@hi-qk5xl 2 месяца назад

Insane timing for this video, I was just about to build this kit and was like why is dude talking about an eclipse, this must be old, ha!

@DavidMausJr 2 месяца назад

Haha! Filmed during it today! 😂

@jlshetler1 2 месяца назад

Thanks again for the info!!

@DavidMausJr 2 месяца назад

Totally!!

@johns.8530 9 дней назад

Really awesome channel. Glad i stumbled on it. Very cool finding like minded people that make you better! Thanks!

@DavidMausJr 9 дней назад

Let’s go! God is good!

@johns.8530 9 дней назад

He sure is!

@RT-qz5ci Месяц назад

The danner is an excellent pump. Great choice. They do start to make a weird kind of clicking noise after several months of continuous use though.

@anthonybosco8795 2 месяца назад

Thank you. Excellent setup. It’s warming up and it’s time put a chiller on my IB500. How often do you run the pump/chiller? Do you use a timer?

@jasonlangford8526 2 месяца назад

Awesome video David! Appreicate you breaking everything down step by step and providing the part list. Very helpful! I'm new to the DIY cold plunge set up, and was hoping you, or anyone else on the thread could answer a couple questions for me. Is it necessary to always keep the water pump running, or its it best to set the pump and cooler on a timer? Do you have to unplug the equipment before getting into the cold plunge (i.e. risk of electrical shock), since the pump and cooler are outside the unit? How loud would you say the Danner 950 water pump is when running? Any help would be greatly appreciated! Thanks!

@kingfish9677 2 месяца назад

Love the build! If I may suggest, in order to pump out the water faster put the T at the outlet side of the pump. With the spigot open then plug your inlet side (with the black male 3/4 plug that the 500 came with) from the inside and it will empty your 500 in no time. I did this with my over complicated build along with a garden hose and I water the plants and grass with the water. Another tip is to get a threaded and barbed combo 3/4 for the inlet side to your hose connection to lower the profile and hug the barrel better. Just my 2cents on your awesome channel. Love the content brother.

@DavidMausJr 2 месяца назад

Incredible idea! Didnt even think of that. Thanks brother!!

@kb1dqh 2 месяца назад

I’m not sure I follow - the water would drain through the pump - or we would use the pump to increase drain rate?

@jamieferrazano6897 2 месяца назад

I have the 1/4 hp and the daner 950. Just waiting for my IB 500. I did build a ozone into my filter system. Just a preference after messing with water challenges in my last cold plunge. Excited to get it all set up

@dusbus2384 2 месяца назад

I've read that ozone can damage certain types of rubbers and plastics but I rarely see it discussed with cold plunges. Have you looked into this at all?

@jamieferrazano6897 2 месяца назад

I did some research and there isn't any info that says ozone is a risk to cold plunges. It could be a risk to a chiller though so I have mine after the output of the chiller just to be safe. I will monitor and remove the ozone if it is ineffective or causing any erosion. It's a good call out. I am not 100% confident but there are lots of people who use them with no complaints.

@dusbus2384 2 месяца назад

@@jamieferrazano6897 ww2.arb.ca.gov/resources/fact-sheets/ozone-effects

@DavidMausJr 2 месяца назад

Awesome! That topic is always tricky. Ozone works well, but its not needed all the time. That is why I jsut use an ozone generator when the water looks or smells like its getting bad and I run it for an hour. If i built on in i would probaby only run it for 15-30 mins in the middle of the night.

@pimpsta213 4 дня назад

Great vid! Very informative and appreciate all the work you've put in. Side note: just me or the links not working?

@bjbailla 2 месяца назад

Awesome! I think I will purchase the 1/4 as you mention and you did state you keep it outside. Do you cover it at all for rain or just leave it as is? Due to how you set it up is there any worry of electrocution if you are using a GFCI outlet? I ask since the pump is now external. Thank you!

@DominicZaidan 2 месяца назад

Excellent David! - thanks for making this. I'll most likely get this done for my Ice Barrel 300 - since i have mine in my garage, you're thinking the 25 HP is plenty right? I try to stay around 45 degrees - thanks

@DavidMausJr 2 месяца назад

Totally!

@DebCollins-rv9ur Месяц назад

Planning on DIY Barrel 500 soon, do you have a reco for a chiller+heat combo for the winter in New England?

@sindsy82 2 месяца назад

Incredible timing - just found out my Ice Barrel 500 gets delivered in 1 week (after weeks of waiting) and was getting ready to pull the trigger on your previous setup! Love your videos, thank you so much for all the great content. Quick question - I live in Boston which means over the winter it's regularly below freezing. I plan to have an outdoor setup. Will I only be able to use this chiller in the warmer seasons (ie will it freeze outside?) Any advice for chiller for someone in my area who has to deal with freezing temps?

@ekarovic2694 2 месяца назад

@sindsy82 My 500 says it was received in Ohio by FedEx on 4/12. Wonder how long it will take to get to Nevada.

@paddybradley5745 Месяц назад

Love the channel, hi here in Australia it gets pretty hot in summer, would I need 1/4 hp or a 1/2 hp chiller to cool a 300 litre cold plunge

@vedrankadric1710 2 месяца назад

Great job! Ordered IB500 after watching your videos/reviews. Started with 100-gallon Rubbermaid, 4 in 1 filter pump and making my own blocks of ice. Not sure if I will need a chiller during summer - Seattle region (to be determined). Would your setup without a chiller be beneficial to circulate and keep water clean for longer period of time (using Hydrogen peroxide and Ozone generator)? Thank you.

@jorgefranco8522 12 дней назад

Hey David, I appreciate your info and content. My question is, I currently own the Ice Barrel 300, and I was looking at the Chiller made by the Pod Company. It runs $1197.00 and has filtration at 20ppm. The fittings are 1/2 inch, but I think we can add a fitting to address that. What are your thoughts?

@robertmartinez3359 25 дней назад

@davidmausjr, hey David thanks for this video, it honestly came at the perfect moment. I am looking at purchasing the ICE Barrel 500, as soon as my wife approves of course. I had a question though. I see you used the 1/4 HP chiller and I was curious how that went. I am in Houston, Texas and our weather is very similar to Florida and I wanted to be sure to get the right one for the job. My barrel will be kept outside but under a patio awning, Im sure that'll make a small difference. Just curious what you would recommend. Can't wait 🥶

@808kea808 2 месяца назад

I see you’re pushing the 1/4 hp chiller. Tell me this, how long does it keep the water at the 3degree leeway before it kicks on? Does the chiller run once an hour for 15 or so minutes or does the insulation keep it cold to where the chiller runs once every two hours ?please and thank you

@jodyneffable Месяц назад

Dave, have you heard of anyone using a small sand filter for the cold plunge? there are several brands that have a half horsepower pump and hold 50 pounds or less of sand better designed for above ground pools.

@DavidMausJr Месяц назад

I have actually. That might be a cool option to try out

@jackhammonssr.8688 Месяц назад

This was super helpful. I have had the IceBarrel 500 for a couple months now (Sold my 400 because it would freeze in the winter in OH). I ended up getting the Eco+ 1.5HP because of another video I watched of yours and I got it for under $1500 shipped with tax (I got tired of buying and making ice). Sounds like this is probably way overkill. Waiting on a few more pieces to come in from Amazon but I did get the shut off valve. Edited, I realized I clicked on the wrong valve. Do you have a pic of the valve installed?

@matthewsomaiah5625 2 месяца назад

Hey man great content I've been looking at quite a few of your reviews. Any noticeable difference on the electricity bill? Assuming your running 24/7. I know it varies based off where you live, but just wondering.

@DavidMausJr 2 месяца назад

I have multiple running at all times and no noticeable difference in my bill

@robertdanielson3322 2 месяца назад

Thanks for the video! Curious, is there a reason you don't use a more robust filter in your dyi setup? Especially when all the prebuilt chillers have a larger filter built in.

@DavidMausJr 2 месяца назад

to me, its just another thing to spend money on and have to maintain. My little mesh strainer lasts just as long, i can spray it out when its time and its simple. Im not swimming in the plunge with my eyes open and its only 3-5 mins a day so I dont need the water drinkable lol

@HolyFitCampOffical 2 месяца назад

Hi David, can I do this set up with the eco chiller and a varsity cold plung

@Juncti 2 месяца назад

Have you ever tried adding epsom salts or anything like that to enhance the therapy benefits with the plunges? For the last month it was cold enough to still use my rubbermaid I started adding epsom and found it beneficial. See others in the r/coldplunge talking about putting dead sea salt in theirs.

@DavidMausJr 2 месяца назад

People do it for sure! I havent really tried it in the cold plunge but might have to!

@joshharris1213 2 месяца назад

Can you have the ice barrel with chiller inside you home? I’ve seen people say they sweat some

@Ryan_Kearns 5 дней назад

Thank you for the video! If you were to put the chiller inside if there was a big storm coming how would you do that? Would you drain the whole thing and remove pump and chiller or is there a way to protect the most expensive part being the chiller and easily disconnect the active aqua while keeping it full.

@DavidMausJr 5 дней назад

I live in FL and all of my plunges are outside with the chillers exposed. Its currently raining and they have never had any issues with the rain or storms. However, in this kit i not have a ball joint to close it up so you can remove everything and clean out the filter without draining.

@Ryan_Kearns 5 дней назад

@@DavidMausJr just to confirm in the kit you do have shut off built in? is it the "316 Stainless Steel Female x Male NPT Thread Shut-Off "?

@conorgeoghegan2104 Месяц назад

Hey Dave, I have done all the steps and used plumbers tape on everything. I keep having leaks on the bottoms through the rubber washer. Ive tighten it used plummers tape, but it seems to be leaking. Do you have any suggestions on how i can solve this issue?

@rosslloyd2270 17 дней назад

David, i have the Ice Barrell 500 on order (thank you for the discount code). I should receive it later this week. I have most of the components already, except the Danner pump. I ordered it on Amazon almost 2 weeks ago (original delivery was supposed to be last Friday). It still hasn’t shipped and there seems there is a shortage. Is there another pump you would recommend using with the 500?

@dylanj1045 2 месяца назад

Hi David, I'm looking to buy the active aqua 1/4 hp chiller for this setup. Do you know if it is safe to use outside? Can I leave it outside while it's raining or is it not waterproof?

@jonmkeller 2 месяца назад

Thanks David, great information as always! Hey wondering if there is a way to add a hot water component to this setup to make it a cold/hot setup? Thanks again!

@DavidMausJr 2 месяца назад

Totally a way to do that!

@jonmkeller 2 месяца назад

Any chance you might come out with a video… how to turn any ice plunge into a hot tub? 😃

@DavidMausJr 2 месяца назад

@@jonmkeller Not a bad idea! :)

@abefroman879 Месяц назад

@@jonmkellermy wife’s boss has a chiller hooked up to his hot tub built into the pool. It’s not ideal nor cheap though and takes 24 hours to cool. He only uses it once or twice a week because of that. It’s better to have a dedicated unit.

@norunners_ 4 дня назад

The silver shutoff you recommended is too restrictive, please swap it out for a full port valve to improve the flow of water.

@DavidMausJr 4 дня назад

Good call

@pokernews916 16 дней назад

Sorry first timer here. Do some chillers come with filter and pump integrated?

@weston5692 Месяц назад

Just finished the setup today! Used a 1HP chiller from Active Aqua… total overkill haha. Big question: what smart devices do you use to turn everything on / off? I don’t really want the pump running 24/7 as this sits in a temp controlled garage. Any thoughts? Was thinking a simple timer but. Just don’t want to mess up the active aqua.

@DavidMausJr Месяц назад

Sweet! You can totally use a timer 🤙🏽

@gerryc1982 Месяц назад

Where do you attach the filter? or do you not use one and only rely on the strainer? really love this set up and looking to purchase, just curious on this filter decision. thanks

@DavidMausJr Месяц назад

I show exactly how in the video but the way I have this is directly to the connections into the barrel and then the pump.

@DLantz-jp3ch 2 месяца назад

For ozone, would you drill a hole, or, world you find a clever t-joint, etc, to plumb it in?

@DavidMausJr 2 месяца назад

T joint and plumb it out just get an ozone generator and use when needed.

@dusbus2384 2 месяца назад

when testing the pump for leaks @11:45 why not connect tubing to the pump and dumb it back into the top of the tub?

@joshn7210 17 дней назад

I noticed that some other DIY options utilize a whole house filter. in this set-up you only show a very small sediment filter. I have an Ice Barrel 300 and have tried it out w/o any pump/filtration and after a few weeks I noticed the water itself stays clear with hydrogen peroxide and a spa water stabilizer/cleaner BUT there appears to be LOTS of small dead skin flakes floating around, I'm concerned with a small pre-filter it won't be sufficient to keep these all at bay. my goal is to change out water as infrequently as possible. I have purchased the DIY set-up....just wondering if I should add a whole house filter in addition to the small sediment filter you show here before putting it all together

@ryansmith9897 24 дня назад

Does this setup work on the 400 if you have the new conversion kit they sell you posted about

@kurtsmith2699 5 дней назад

I’ve missed a few videos. You used to insist on a 1HP chiller with 1” tubing. What’s changed? Is it because the insulated barrel doesn’t need the extra HP?

@user-ib7sy7nm2b 2 месяца назад

Great video. Always use plumbers tape. It''s cheap and easy to use. There no reason not to use it to make sure those connections do not leak.

@DavidMausJr 2 месяца назад

good call!

@paniro21 2 месяца назад

I wouldn’t use a tee. I would just use a valve before the strainer to allow for strainer cleaning without draining barrel. I would also use pipe dope or teflon tape on each fitting.

@paniro21 2 месяца назад

I would also use a rubber hose washer on the barbed fitting coming off the pump. My setup is indoors and I needed it leak proof.

@DavidMausJr 2 месяца назад

Solid ideas!

@svelez911 2 месяца назад

Can you share a picture of the valve and washer setup?

@robertcorey7275 Месяц назад

David, just finished setting mine up using your video. AWEOME. Can you tell me how you use, and how often, the Hydrogen Perixide? The icebarrel Stabilize is self explanatory. Thanks a ton.

@DavidMausJr Месяц назад

Awesome! Use a cup on first fill up and add a cap or two every week or as needed.

@robertcorey7275 27 дней назад

@@DavidMausJr can u clarify? Is it a cup or cap of the hydrogen peroxide?

@zcuddster 19 дней назад

How did the 1/4 HP chiller work keeping it cold? Thanks man!

@DavidMausJr 19 дней назад

Working great!

@joshn7210 Месяц назад

do you have an update on how the 1/4 hp pump took to bring to temp in FL temps? how often do you run your pump?

@DavidMausJr Месяц назад

its working like a champ! still in the same spot, baking in the FL sun and ive been impressed. Keeps the temp right on the number for me. I keep it all on 24/7 but the chiller kicks off when reaching the temp

@damienmanzano6415 3 дня назад

How long does it take to get cold? Just wondering how long I should run it for before jumping in.

@Fit4Life921 12 дней назад

Is there a reason you didn’t use ball valve so you can clean out filter without water leaking out?

@DavidMausJr 5 дней назад

I should have, its in the kit now but i didnt really think about it since mine are always outside.

@paulgaffney1895 2 месяца назад

Can I use the active aqua on the ice up industry plunge ? And if so what size tubing and attachments will work ?

@DavidMausJr 2 месяца назад

I’m sure you can, I just need to take a better look at the Ice Up tub fittings.

@paulgaffney1895 2 месяца назад

Let me know when you can i appreciate it! Thanks

@paulgaffney1895 2 месяца назад

Hey David how do you feel about 1/2 hp ecoplus (not commercial) vs active aqua?

@abefroman879 Месяц назад

I have 1/4 eco plus. It works great.

@alexiacarrasquillo 2 месяца назад

Hi David . I just moved and had to part with my troth I was using. I was wondering if there is an ice barrel you are not in need of or want to part with it. I live in Florida myself. Please let me know and God Bless 🙏🏼😊

@DavidMausJr 2 месяца назад

Where do you live? Send me a message on IG @dmausjr

@justinorrick9137 12 дней назад

have you looked at the Poafamx Aquarium Chiller 79 Gallon 1/3HP? Any thoughts on this compared to AA? this is about $200 cheaper

@richbering7256 3 дня назад

I'm confused; doesn't the Active Aqua Water Chiller have a pump inside? If so, an extra pump for extra water flow?

@JoshuaGalbraith-nk5ux 26 дней назад

Any idea how much electric the pump and chiller use with this set up on a daily basis after the initial cool down?

@DavidMausJr 26 дней назад

Pulls between 1-5 amps continuously

@stefanhochfilzer9175 Месяц назад

Hi, How cold does your ice barrell 500 get with the 1/4 hp chiller? And have you tested the 1/2 hp vs the 1/4 hp? I'm looking to get 37 degrees with the 1/4 hp chiller.

@DavidMausJr Месяц назад

It got me to 39 with no problems, I didnt hack mine to get it to 37 but people do. To me, 40 is cold enough :)

@steveko613 3 дня назад

Two questions. How much of the hydrogen peroxide are you adding? And do you have a filter as part of this DIY? Seems like some of your tubs have a 20 micron filter and some do not?

@gerryc1982 Месяц назад

Hey David. Thought I'd ask since you've tried both ice up and IB. ive actually ordered a IB 500. but I was leaning towards the chiller Ice Up sells that has all in one. I imagine your DIY setup may be less expensive, but why didnt you just use your all in one chiller with the IB?

@DavidMausJr Месяц назад

I have the IceUp chiller hooked up to that inflatable barrel. I have a few setups running 24/7 so people can come get cold with me.

@Miguel_Morales 25 дней назад

How low do the temperatures get with the 1/4 and IB 500 in 80-90 F weather?

@ryno3888 2 месяца назад

Have you noticed any other benefits from the Danner pump, versus the Hydrofarm (other than structural integrity)?

@DavidMausJr 2 месяца назад

Nope. Just stronger and feels like a better quality plastic. Other than that it moves water

@ryno3888 Месяц назад

@@DavidMausJr Just installed my chiller setup on my 300 today. Followed this exact tutorial, step for step. Works great and saved a ton of space. Thanks again, sir!

@chrisgirolamo8865 Месяц назад

I didn't see the drainage spigot linked in the amazon list. Can you kindly link to that?

@DavidMausJr Месяц назад

It comes with the ice barrel 🤙🏽

@WCSOUL 2 месяца назад

Are the fittings with your DIY relatively universal for other similar tubs with chiller fittings (i.e. redwood outdoors Alaskan cold plunge)? In other words, if I get your DIY package will it be appropriately sized for most other plunges? Thanks!

@WCSOUL 2 месяца назад

Looks like the Redwood Outdoor has a .50 instead of the ice barrel 3/4… do I just update every male- female bard/fitting to .50 or just the barb?

@DavidMausJr 2 месяца назад

Yes that should work! The only thing you would have to adjust is the attachment to the barrel, i wouldnt suggest getting all 1/2" parts, just get a thread adapter. This will work: amzn.to/3VWD5Jr

@WCSOUL 2 месяца назад

Thank you 🤙🏼

@inacioneto554 28 дней назад

The 950 pump still out of stock what another option could be a good option ?

@craigkilbytube Месяц назад

Hi, @davidmausjr, I'm hoping you can answer this question for me. I actually referred a few friends to buy this kit on amazon. I'm not sure what's going on w/ my kit, but since I already had the stock tank and chiller (1/3 Hp Arctic Pod), I thought I could easily adapt. HOWEVER, my chiller which seemed to work fine and could chill my previous tub from high 50's to low 40's in just a few hours (using a 200 Gph pump and 1/2" connections), this new setup takes FOREVER to chill the water. The only thing I can think of is the pump is pushing the water through my chiller too fast and I'm trying to figure out how to slow the flow. Your help/advise would be much appreciated!

@DavidMausJr Месяц назад

Oh man I’m sorry for that. Can u send me a pic or video on Instagram @dmausjr

@brendenyates 2 месяца назад

Just set up a similar plunge. But have noticed my filter leaks a bit if I have the chiller and pump unplugged for a day or so. Any idea why?

@DavidMausJr 2 месяца назад

Probably the water pressure sitting in it. Any reason to keep it off? I just keep mine on

@jessygibbs4132 2 месяца назад

i swear i change that strainer filter every week and it sits under a roof , you get a little bit in it and it your flow doesn't get much lol😅

@DavidMausJr 2 месяца назад

I rinse mine out about twice a month, but sure beats buying and replacing a filter multiple times over and over.

@brandonsimon2804 2 месяца назад

Thank you sooooo much for this video!!!! Now if my IB500 would ever show up I can do this lol

@DavidMausJr 2 месяца назад

I got you!! Its coming soon! I can feeeeel it :)

@ekarovic2694 2 месяца назад

How long ago did you order it? I ordered mine on 3/23/24 and it still says processing.

@crewu1216 2 месяца назад

@@ekarovic2694 where do you track your order?

@brandonsimon2804 2 месяца назад

@@ekarovic2694 3/19 🤦🏻‍♂️🤦🏻‍♂️. I have the nurecover that I’m using daily but it’s a real pain the rotate that much ice everyday lol

@saundersbuck7247 15 дней назад

How long does it take you to chill your tub? I bought this exact tub and start to chill it and it drops 3 degrees in an hour and a half. What could I be doing wrong?

@kevinfly1051 15 дней назад

I’m having the same problem. Ran all night hasn’t changed temp yet

@abefroman879 Месяц назад

How often and how much food grade hydrogen peroxide and ice barrel stabilizer do you use? I noticed you added just a small amount initially. Thanks for all the tips and advice.

@DavidMausJr Месяц назад

I start with a cup of H202 and a few (5) drops of stabilizer

@abefroman879 Месяц назад

Thank you!

@justinahrens8640 11 дней назад

I seemingly am having to wash the filter daily. Is this common. Would you recommend anything different?

@DavidMausJr 5 дней назад

That does seem odd, where is the plunge at? what is clogging it?

@johnathanbradley2174 Месяц назад

Does anyone have any suggestions for mats or something to catch the water under the Ice Barrel 500? Does the felt mats work? I was thinking about something like a washer basin, but I don't think they get big enough. Any thoughts?

@DavidMausJr Месяц назад

check out this link there is a mat in that people use and love dmjr.co/cleaningkit

@johnathanbradley2174 Месяц назад

@@DavidMausJr Thanks bro! I will check that out.

@johnbernard5149 2 месяца назад

Why the switch from the Active Aqua Pump to the Danner pump?

@DavidMausJr 2 месяца назад

It’s more solid plastic so less likely to crack and leak.

@griffinrobles6649 2 месяца назад

What temperature are you able to maintain with the 1/4 HP chiller in the Ice Barrel 500? Would the 1/2 HP chiller maintain a colder temp?

@DavidMausJr 2 месяца назад

1/4 is keeping it right at any temp I set it to

@DavidMausJr 2 месяца назад

@griffinrobles6649 2 месяца назад

@@DavidMausJr Thank you very much.

@FantabulousMe100 2 месяца назад

I've got the active aqua 1hp and a danner model 18 (1800gph) but running into issues. When I first hooked everything up it worked like a charm went from 62-39 overnight. Then the next day it could not maintain it in the 39-41 deadband range. The compressor inlet is icing up, like it is now white instead of black. That's the only symptom of a problem I can find, not even sure it is a real issue. Any thoughts?

@DavidMausJr 2 месяца назад

It might be too cold pushing too fast. Only thing I can think of is send me a pic of video on IG @dmausjr

@FantabulousMe100 2 месяца назад

@@DavidMausJr i think i figured it out, appreciate the reply. Seems like it was not getting enough flow due to a strainer on the intake and danner said the tubing should be 1 1/4" to hit the full flow with this pump My mistake was using 3/4 lines and the strainer from penguin. Got the tub/chiller setup from them but unfortunately they really suck and I'm trying to return the chiller at least for a refund

@DavidMausJr 2 месяца назад

@@FantabulousMe100 I hope they help you out.

@watermeli1059 Месяц назад

Can the filter be upside down?

@DavidMausJr Месяц назад

Yes 👍

@MrRyanj987654321 2 месяца назад

Does your chiller ever get weather on it? I want to keep mine outside like this but might have to build a case for it as I live in a very rainy climate (Seattle area)... I would prefer not to if it isn't necessary :)

@DavidMausJr 2 месяца назад

Yes it does! Mine live outside in the FL weather with no issues

@peterfriedman3745 14 дней назад

Hey! Great set up and followed it exactly. The manual of the chiller says do not operate outdoors. Is it just being legally conservative?

@peterfriedman3745 14 дней назад

Have you used it in the rain? Any issues?

@MrRyanj987654321 14 дней назад

I ended up building a custom enclosure with a deck box. I live in Seattle so it’s a lot of rain haha.

@shs- Месяц назад

which pump would you say is quieter? danner or hydrofarm?

@DavidMausJr Месяц назад

Hydro seems quieter, danner is quiet until water flow is restricted which is nice as a reminder to clean the filter.

@shs- Месяц назад

@@DavidMausJr thanks! ordered the full set up

@benjamindenney6704 2 месяца назад

Have you heard about an ice barrel trade up program where you can trade in a 300 and get a 500?

@mattlange3530 2 месяца назад

Is this a real thing?

@bryantvasquez1907 Месяц назад

Which Temperature controller would you recommend for this setup?

@DavidMausJr Месяц назад

The chiller has one built in

@bryantvasquez1907 Месяц назад

@@DavidMausJr got it. How about shutting off the pump? Should it run all the time?

@DavidMausJr Месяц назад

@@bryantvasquez1907 Run 24/7 just posted a short on this.

@JuanLou-oy6ui 2 месяца назад

Hi,Could the next video review ozone generators? Sorry not received your reply💐💐💐💐💐💐💐💐

@paulcracknell1141 2 месяца назад

Will this work for the 300? Ice Barrel just informed me that my order for their chiller will be delayed until late May. They've had my money since January. They are offering a full refund and I am seriously considering it.

@DavidMausJr 2 месяца назад

This will work with the 300 too! I know I’m equally sad about the delay