We Build The Best Chest Freezer Ice Bath | Custom Car Quality 

Thank you. This is the best one I’ve seen around. Really like what you did with the Ozone Generator and not having electrical/pumps inside

We have a lot in common . I lived in Australia for a while , I paint cars for a living, Sprayed lots of Raptor , Been taking cold showers for a couple of years .The only difference is my wife fights me on everything , except the divorce . The best part was watching you both work together , and the dog.

“Why are you sitting in this ice cold water bowl guys?” Dog

I would definitely agree that this is likely the best chest freezer ice bath in the world! i'm super looking forward to your update video!!

Holy cow, the quality on this build. Thank you so much for a great example!

This is beyond awesome. The colour combo is on point and your skills are next level. Congratulations on a job well done, you’ve done well.

Great build - looks top notch!

Great job. Wouldn’t expect any less from a reputable body shop. I’ve already started piecing together the components to build my own. You have given me some great ideas to improve my build.

I'm 28 days in on my ice baths..... subscribed for updates to this!!! Looks amazing!!

Great work...both on this ice bath as well as auto-related. Subbed. Looking forward to updates on the durability of the ice bath!

Awesome build! Love the paint

Amazing video!! Thank you for the share!!!

Nice job guys looks awesome.

Awesome job and awesome video! I too look forward to the update video. Thanks!

WOW good job! the colour is very very nice!

Would have to be the best info video on a DIY ice baths I've seen so far folks. Thanks for the info and good luck with the 28 day challenge. Looking forward to your water test and power usage results. 👌👌

Amazing! Thank you for this!

She looks amazing. The chest freezer too 😉

great JOb guys and great to see you both doing something together. THanks

Awesome, nice work - that's the best chest freezer icebath I've seen.

Wow you guys make a great team! Awesome skilz! Thanks for sharing

Ok, now I am on craigslist looking for old ice chests... and your dog is awesome! Thanks for the video and the ideas. Great execution.

Yes my friends you have, and one of the best looking ones as well

Great vid and info guys. Currently doing up an old bunky. I found the inlet/outlet flanges at RTM in WA. Pretty good selection for boats. I assume most marine shops would be able to supply them. 👍🏼

this was incredible, eager for the update

Best DIY video yet! I have an icebath cheest freezer and I need to modify it like this!

Great 👍 job thank you for sharing.

rock star project. :)

That was great thank you ❤

NICE JOB, ALWAYS GOOD TO PAINT WITH RAPTOR WHEN THE BOX SAYS POISON, LOL

Looking forward to your next vid on an update. Not just how the tub is holding up, but y’all’s plunge benefits to your health. Cheers 👍

Fantastic job! A parts list would be good.

Very interesting.

So fricking cool!!!

Wow congratulations Awesome!!! I celebrate your view on health!!! Greetings from Mexico we also enjoy IceBaths on mondays with our friends and comunity in our ranch

This is the video I've been searching for!

Great build! What kind of fittings did you use through the chest freezer ? Much appreciated!

Nice video.

I hope that Raptor liner is non-toxic. Seeing how the box says poison and all lol.

Great video! Alot of hard work! Got some great ideas 💡 thanks so much for sharing. Ps in my research I did see that your inkbird thermometer is not the one made for aquariums/under water all the time- with rubber seal. Apparently it will degrade/rust over time. They are same price. Just another content creator sponsored by them mentioned it with his ice bath ❤ Also had a question about your waterproofing- is it non toxic? Will chemicals leach into water? I'm deciding on my waterproof sealer now and too many options/different advice out there. Alot reccomend pond sheild (epoxy 2 step) or rubber pond sealer.

Wow u r so professional !

Question....where did you buy the pump kit from? As well, I'm assuming you plug in the freezer and keep it running to cool the water when you're not using it? The reason I'm asking is I've seen videos that use a fridge but just for holding the water. They don't plug it in...and do you add ice to it or was that ice formed from just plugging it in? Awesome video btw, best I've seen yet!!!

I'm currently sealing my chest freezer and I love the look of the liner. What grit of sandpaper did you use to prep the surface of the inside and was it by hand or a orbital sander? Absolutely amazing cold plunge

Great video where did you find tank bungs Long enough to fit through the sidewall?

This is awesome! I'm assuming the 28 days were over Feb? How did it go? Did the ozone/ pump help keep the tub clean?

Guys this looks amazing. Awesome job, best DIY ice bath I’ve seen on RU-vid 👏. You’ve given me some good ideas for my chest freezer conversion, thank you for the vid! One question, would I be able to apply the Raptor coating with a roller or a paint brush? I don’t have a spray gun and that stuff looks really good…

Love it! Just bought a freezer myself. What about the weight if the water? Did you have to add supports underneath? If not, have you noticed any sagging?

Great video! Would you ever consider posting links to all the products you used? Specifically the electrical and pump equipment?

Awesome job you’ve done guys and great Vid! I have just bought the ozone generator you used and am just trying to work out the colours with the wiring to swap plugs over, is the earth (Black) natural (white) and earth (green) do you know?

thank you for this excellent video! I am on my 72nd day of cold bathing in a water recovery tank. but the temperature starts to rise too quickly. I was looking to make a new one with a freezer. do you have the reference for the black water fittings please? I can't find any to cross the walls? can't wait to see the second video, I also hope to be able to finalize mine by then!

Hi guys, this set up is so cool, congrats! I am actually in the process of converting my chest freezer into an ice bath as well, but I am a bit stuck with the ozone generator situation. I am looking at getting the same one you've got but am lost about how/where to plug it in? I am not familiar with that AMP connector and unsure as to what to do with it? I'd love your input :)

Awesome job guys, I'm not as handy as you so I am getting a professional to spray Line X in my chest freezer and just going to rely on some pool chlorine for sanitation. Will just have to pump the water out every few months but your setup would be great. I suppose later down the line I could go down the solutions you've got by drilling in from the outside but I reckon I'll just keep it simple.

Very different, but no less epic because of it! As a Born Northern Territorian I was perfectly happy working in winter at minus 8 degree's Celcius in shorts & Tee shirt as much as I was in Summer at 48 plus Celcius. Modern society forgets more than they remember, we are creatures of the earth, not above it.

Awesome build, have you got a list of parts you used for this saved anywhere? - particularily interested in the pump/ filter you used :)

way cool!

How did you attach the wood to the side of the freezer? Unbelievable shop and plunge build! Thanks for sharing

Great video. We’re ther any issue with the silicone sealant and the spray in lining. Quite often nothing stick to silicone. Thanks

Great set-up! I’m doing the same. What pump did you use and pvc connectors?

Thank you for the video you made. This has really inspired me to start making my own ice bath. I have a question about the paint. Is it still in good condition? I have not yet found the right paint that is suitable for underwater. If it is still in good condition I will start using this one too. I look forward to your response. thanks in advance 🙏🏻

Great video. Can you post links for everything you used? Especially the water pump

Very nice! How's that seam sealer holding up? I've been reading that JB Water-weld, or similar, will last the longest...

This is great, just wondering how you screwed the plywood board on the side without hitting any coils?

Great concept. Do you by any chance know the KWh usage of the entire plunge?

Gosh I want it

Nice cold plunge🥶🥶. Just a couple questions. How did you install the tap at the drain location? Do you know if raptor coating is potable water storage safe?

thank you

Love it. About to do the same to my freezer. How many bottles of raptor liner did you end up using?

What an amazing setup!!! Was wondering, is the spray liner toxic to humans? Was thinking maybe it will leak into the water and affect my body

Great teamwork guys. Barney been in yet?

Enjoyed the video and subscribed, is it possible to add parts list for the ice bath build in the 'show more'?

When is the sequel supposed to be released? Very interesting build! It would be nice also if you could tell more about the benefits you’ve gotten so far.

If you were selling this I'd totally buy it! But at the same time I think it would be a fun project to make myself one :) awesome job

Hey there i have a question regarding my chest freezer inside the freezer i have a thermometer that’s a part of the chest. Now do i completely seal this or remove it? or do i seal around its edges only? i’m not sure if this thermometer is waterproof

Could you do a video of a step-by-step lesson on how you assemble the external pump and Ozonator and temperature controller...I'm confused on your video a bit... What is plugged into the power bar coming off of the temperature controller where it's labeled cooling and heating? Its a very specific plug configuration and at some point in your video something is plugged into that cooling receptacle....whats plugged into there?

Liked because of the Trueno

Hey, really nice set up! What was the size of water pump that you used? liters per hour? Also, how's the water quality keeping up? Thanks

There wouldn't be many HR Holdens left at a guess (even though a lot were made). My first car, got one when I was 17 and had it for 17 years, cannot remember the last time I saw one.

Regarding the raptor liner and leaks, Have you had any leaks? Just got my freezer and starting the ice bath project.

Hey legends. What pump did you use?

Do you think you should have put the filter in and out at opposite ends to ensure complete filtration? It will only end up filtering the pocket of water at one end with them next to each other.

AMAZING! I would be very interested in purchasing one of these from you guys. The market is hot for these right now, but the cheapest ones out there are going for $2000 USD. If you could come in under that, I think you would make an absolute killing. Please let me know if you end up selling these!

this looks great, interested to know how it looks now several months on? is there anything you would change?

Amazingly job! Where’s the update video?

Thank you for the video. @ 5:03 can you give me details about the piece used for the temperature probe to stick in. What part and size is that? Any link is much appreciated.

How did you attach the tap to the drain plug? Great vid

Nice job. I'm interested to see how the raptor lining holds up. Apparently some people in the DIY cold plunge community had theirs come off. Could have been poor prep work though. I'm looking into doing something like this myself, so trying to find out what the best way to go about it is.

What water pump did you use??

How long did you wait for the bed liner to off gas before filling it with water? I went this same direction with my cold plunge! It’s been two weeks and the smell is still bad.

Is there any way you can do a quick video on the diagram and setup used to mock up the pump and electrical?

Great ice bath! One question.... When i switch on my freezer, filled with water to cool it down, it get extremly hot on the outside. Is this normal and do you have the same experience?

How did you fit the tap in the outlet? I’d like to fit one in mine. I am going the DIY route and don’t have much idea about these little things. Any help would be appreciated.

Hey mate, how did you fix the panel with all the electrics onto the side of the chest freezer without piercing the coil/pipes or motor?

Is the caulk working well for sealing the seems? Caulk usually remains rubbery while I believe the Razor Coating is pretty hard. Are they staying stuck together and sealed?

Any chance I could grab a list of the items used including pipes and fittings? This is a great idea. I don’t like the idea of power cords running through the bath either.

hi, great video 🙌. I have my chest freezer and raptor is on order. Can i check did you do anything to prep the metal surface inside first e.g. rubbed with alcohol and scratched the surface up etc?

sweet trueno

Do you recommend only using the raptor as painting ?

Do you also run a filter? What type do you use .

What tint did you use? Is it a special type you have to use?

How is the sealant holding up after a year? Would you change anything in your design?