Thanks for the tips. I use IPA based dyes after applying Neatsfoot oil to get absorbed fully up for 6-8 hours. Then dye dry out time for 24 hours, then applying DIY WAX CONDITIONER made of beeswax, carnauba wax, lanolin wax, Shea butter, Neatsfoot oil, waiting time minimum 72 hours then buff with microfiber towel and horse hair brush.
I learned a lot here. Great video. This series is great. My leather projects have always been hit or miss because of not really knowing what I was doing.
Thanks, That's why we make videos like these! We want to help you avoid mistakes, and be able to enjoy your projects. Is there any specific skill or part of the leatherworking process that you have trouble with?
I had a blue leather jacket, and the dye would get on everything. I thought a rubbing and time would help, but it didn’t. What if that happens to my wallet.
If you properly apply a top coat to your wallet, crocking (dye transfer) shouldn't be a problem. In this video, I used leather balm with atom wax, but if you wanted to be extra safe, I would recommend using a couple even coats of resolene. It will do an even better job of preventing crocking, and even give you some water resistance! I hope that helps.
Very knowledgeable and accurate. I’ve been working with leather since 1993 until about 2012. I haven’t been able to because of living situation been able to since then but am in the middle of moving now and will be getting back into it. I am really excited about this and I’m hoping in a few month I’ll be set up to start again. I have lots of tools but need to get a new machine for sewing. 💜🙏🏼😎
Happy to hear you will be able to get back into it soon! We just filmed a video using two of our machines for sewing leather. That video is called "Leather Sewing Essentials" if you want to check it out!
I like the color contrast of having the back side remain its natural color, and having the darker grain side. You can dye the back side as well, it just uses more dye, and tends to look splotchy. You will get a similar effect by scrunching it up, although less pronounced. I hope this helps, best of luck on your next project!
