Thank you so much for this! I’m just getting ready to do some maintenance to my 13’ Chrysler 200 and these videos really help! I was just about to get the AC professionally fixed, so you’re saving me a lot of money. The headlight video helped as well, thanks again!
So I ordered my Dorman part and it came with a paper saying that a reset process was required after installation or it wouldn't work properly. Said it required the use of a scan tool through the OBD-2 port. It looks like everyone here was able to fix without a reset? Any advice is appreciated 👍
Hey i have a hyundai sonata 2018 My wife car just start this clicking sound but even when the car is turn off the noise still keep going? Can you help me with any information
You videos are awesome. I do have a question is my Chrysler 200 2013 will start to over heat when I am idle after driving for more than 30 minutes. Would you know what it could be?
you may wish to look at your coolant level, you should only add coolant when the engine is cold to avoid server burns. if you can see a leak, it should be fixed quickly. I have another video on sealing an internal leaking head gasket you may wish to view. it was done on a Chrysler 200: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bS_0YRbsQhs.html
Mine is not making a clicking sound but some other weird noises. I cant find exactly where the sound is coming from but my heat does not work so im figuring it has something to do with that.
So I ordered my Dorman part and it came with a paper saying that a reset process was required after installation or it wouldn't work properly. Said it required the use of a scan tool through the OBD-2 port. It looks like everyone here was able to fix without a reset? Any advice is appreciated 👍
most all repairs say to disconnect the battery for liability reasons. The voltage of the battery is not enough to give you a shock. I did this work without disconnecting the battery, yet you can if you feel more comfortable doing so but you will loose all the radio settings. I wish you the best on your repair
@@bbbjim1fixedit would you happens to know what would cause the ac not to blow. Cold air 3 mechanicals I’ve taken it too haven’t found a problem with it
I’ve been trying to find a video on the third actuator location closest to the driver side (sounds like it’s left hand side of the stereo area) anyway I have no idea where to find that. Lmk anyone if you happen to!
I'm sorry this wasn't my car and I am unfamiliar with the location on the 200, hopefully someone can leave a comment to get you in the right direction. I wish you the best on your repair
They sometimes have a mind of their own. To get it to act up to ensure you are replacing the correct one, try turning the ac recirculation button on and off. I wish you the best on your repair