CineBot25 S HD O3 Review // Fast(ish) & Flat "Cine" Flights

Подписаться 59 тыс.

Просмотров 7 тыс.

50% 1

GET MORE PROPS :)
GepRC CineBot25 - tinyurl.com/mryvcsbh
From Banggood - tinyurl.com/te37fk9e Banggood - (N America Coupon "BGNick2022" 8% off)
AliExpress - tinyurl.com/yss3rvj3 - Be sure to select "cinebot23"
My Rates - • MyRates // Betaflght R...
My Video Reception - • Get Good Indoor Video ...
🔥Daily FPV Gear🔥
► HDZero Goggle - tinyurl.com/mt7f6auw💣
► Radio I use RadioMaster Zorro - tinyurl.com/3d8emnyj
Zorro @ Amazon amzn.to/3uDFt8J
► Best All Around Micro Batteries!! 💯 GNB 💯
Banggood - bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) tinyurl.com/3d57xeyu
► Adhesive Welder amzn.to/2IpKKHj
► Motor Wire Tape amzn.to/3iJjTrT
► Magnifying Headset - tinyurl.com/mr2cn6xx
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► RaceDayQuads - tinyurl.com/4we9rpzp
► HDZero - bit.ly/3GABBfU
► WeBleedFPV - webleedfpv.com/NickBurns
► FlyWoo - tinyurl.com/3yyfu75w
► GetFPV - tinyurl.com/2nndzn3t
► Banggood - tinyurl.com/429re5uw
► RotorRiot - tinyurl.com/yc8cx8ws
► Caddx - tinyurl.com/yc6r2b82
► AliExpress - tinyurl.com/2p8rybr8
► Emax - tinyurl.com/muex8hyt
► RadioMaster - tinyurl.com/2p97vtsc
► NewBeeDrone -tinyurl.com/mrx7fb2c
► Amazon - amzn.to/3iJjTrT
► MakerFire - tinyurl.com/4xv4yk36
► BetaFPV - tinyurl.com/3t2mn76d
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc

Наука

Опубликовано:

3 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@coastaldronemarketing3734 Месяц назад

Great review. I especially love your smooth split s's or whatever you call them. A video explaining how you do those would be awesome!!

@MCsCreations 3 месяца назад

Fantastic flying and review, Nick!!! 😃 Stay safe there with your family! 🖖😊

@lynsmith1096 3 месяца назад

Good review again Nick

@_tcmore 3 месяца назад

The adding O3 extra cost must be the not selling walksnail quad fee 😂 Great review as always Nick!

@Nspecthergadget2010 3 месяца назад

Yes zoom zoom, nice fast run. Really liking the big tree climb power loop. I'm on the same page with the fast flight. Nice quad, good review. Thanks for the ride

@burdfamfpv 3 месяца назад

03 is dominant great review nick,I'm not crazy about pusher drones myself but nice looking quad!

@velocistafpv 3 месяца назад

I have the Cinebot30 and the Thrust Linearization works, though it is sensitive to the condition of the props. Beat up props would still give the waggle, so it wants good props to fly with all the time. Nice review as always Nick!

@CustomFPV 3 месяца назад

Hey Nick! Awesome video. Thanks again for your support of the 2024 micro drone race at the US Air Force Museum this year! The event was epic.

@NickBurnsFPV 3 месяца назад

Nice. I hope everyone had a good time. I have seen a few posts on Facebook. I haven't seen much YT videos on it yet.....hopefully soon.

@FlybyJames 3 месяца назад

Thanks for the review!! Where does this cinewhoop fit in the Geprc catalog? I guess the cinelog v2 is the flagship 25 cinewhoop but it seems the price is about the same. The cinebot is possibly more durable? I don't understand the need for both versions at around the same price. If you had to choose, which Geprc 25 whoop would you pick and why?

@NickBurnsFPV 3 месяца назад

Of those I would go with the newer Cinebot25 as I do think the prop protection will be more durable than the cinelog

@CaptCalgary 3 месяца назад

Great review Nick! And pricy for us Canadians lol. Thanks again

@MCsCreations 3 месяца назад

9:32 "Because I need it!" Now I can't stop singing Highway Star, Nick! 😂

@stedieduvie Месяц назад

Saw this and decided to get one and I really love it. Did you have any crazy jitters when you add a naked gopro? Mine has crazy jitter and cant get them out even with gyroflow. Mike came with only one programmed PID profile

@NickBurnsFPV Месяц назад

Not in the gopro video as in the video. I do have hyperflow setting on. I did have jitters in the O3 fpv view as in the video slow flight.

@argentinaerialsFPV 3 месяца назад

the frame look similar to pavo25 from betafpv! what motor holes have this frame?

@MountaineerFPV 3 месяца назад

Hey GEPrc…That sniffs out to me more around 350-4hundo. At the most. Dope rip Nick 👍👍🇺🇸

@mattalford3932 3 месяца назад

Setting that avata up was way more complicated than it needs to be, though. Country code not set. Had to go on my pc and refresh the firmware. Now everything is fine lol. I have an s23 ultra. The fly app isn't in the Google play store lol.

@skardy8_fpvakabradlee881 3 месяца назад

Hey man, sorry to keep asking this but I am deciding between the GEPrc darkstar 20 and the Cineon C20 V2 for inside flights and these 2 are amazing out of my decisions, what are your thoughts on them? Sorry to bug lol

@NickBurnsFPV 3 месяца назад

Have you seen this video? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-87paFkhZLIY.html

@artsaenz9945 3 месяца назад

for real estate would you pick this over Pavo 25 v2?

@JONHFPV 2 месяца назад

Nick, are these images stabilized? good smooth flight

@NickBurnsFPV 2 месяца назад

No, Generally I don't use any stabilization for any review. I think there is one or two video when I turned on EIS on the O3 but that only impacts the video stored on the O3 and I should state that pretty clearly. Any video showing the betaflight OSD information isn't stabilized.

@sullytrny 3 месяца назад

I think they are just keeping production to the rapid prototyping portion, hence the constant changes/innovations. It's fine by me and face it, few drones last more then 500 packs

@roberthinterleitner3705 2 месяца назад

i got a broken duct after the first crash, the lipo got unpluged on full throttle becouse the xt30 was verry lose... crash got into the a field

@ldnwalkandfly8617 3 месяца назад

The waggle was on cinelog30 I believe, not cinebot30

@Smog_007 2 месяца назад

What is a bad face for glasses?

@CDRaff 3 месяца назад

Speaking of injection molds: They are working with relatively small parts with simple geometry and probably making less than 50k units per run which can be done all in house relatively cheaply(especially in Shanghai). When people talk about molds costing 10s of thousands of dollars they are talking about complex high yield molds.

@NickBurnsFPV 3 месяца назад

Interesting. That does surprise me as when I have asked about changing our whoop frames I have been told its really expensive and not cost effective. hmmm

@CDRaff 3 месяца назад

@@NickBurnsFPVA tiny whoop frame is going to be a more expensive mold because of it's size and the tolerances needed because of that size.

@rfly-fpv 3 месяца назад

Nice! But seems like GEPRC Cinelog25 V2 HD O3 is a bit better IMHO.

@divingfalconfpv4602 3 месяца назад

Still waiting for moonlight cinebot 25

@mattalford3932 3 месяца назад

It can also be a DJI BNF.

@natlozzz 3 месяца назад

🔖Hi Nick, I am willing to buy a drone that I can use to fly in small to medium parks. Which would be the one/ones that have the longest flight time? Am looking at least up to 10 minutes? (Just cruzing, no trics).

@NickBurnsFPV 3 месяца назад

Of the top of my head I can't think of anything that might get or near 10 minutes of flight with a prop at 3 inch or smaller. At least not in the fpv space, dji camera drones will get those sorts of flight times. A larger propped quad probably wouldn't be very good in a small park. I would suggest getting something you like an more than one battery. Most when learning to fly need breaks, this is a good time to change batteries. And as we get more comfortable flying we need focus breaks to relax before the next flight.

@agustinhuelar 2 месяца назад

which pid profile are you using for o3?

@NickBurnsFPV 2 месяца назад

I believe it by default is set to pid profile 1, which has the tune geprc setup.

@agustinhuelar 2 месяца назад

@@NickBurnsFPV Thank you!

@chunkit78 Месяц назад

what are the different between cinelog 25 v2 vs cinelog 25 s

@NickBurnsFPV Месяц назад

motor size 1404 vs 1505

@chunkit78 Месяц назад

@@NickBurnsFPV thanks Cinebot25 or DarkStar20? I have been flying in liftoff for more than 50 hours with radiomaster boxer, and mobula 6 in acro mode for 2 months plus. The reason I am getting cinewhoop is because I will be flying indoor and for safety purpose since it comes with prop guards, and not ready for extreme stunts moves at the moment. 1. Do u guys think I should get the cinebot25 S or DarkStar20? Or any better choice for beginner? 2. Is the Integra Goggles still a good choice for now? Since Goggles 3 dont support O3 air unit and Integra's price has reduced. Thanks in advance!

@NickBurnsFPV Месяц назад

@@chunkit78 I suggest going smaller. The larger the quad the more skilled we have to be in order to not spend all the fly time crashing. I can't speak to much to the goggles as I only have goggles 2. I suggest with DJI to go for the most recently released as they don't have a long history of compatibility.