Citroen C4 Install Of Our Replacement Glove Box Lid Handle 

I had first tried a plastic replacement that broke just trying to fit it, so went for this metal version . The video is very helpful, but take a moment to see how the handle works. It swivels on the two circular pins, which have small location brackets (or lugs) on the inner side of the outer skin of the glove box lid. That is why it is necessary to push the handle up into these lugs and this is best done one at a time, as shown on the video, but is helpful know what you are trying to do. You can see these lugs from the inside of the glove box lid, better still with a torch. If you have difficulty locating the spring ends, these can be located by using two small screwdrivers, one to hold the spring in position and the other to then push it slightly up and then back into the handle recess. The springs then provide the tension for the handle to work. The metal handle looks good and has a very solid feel.

Just followed this guide myself - works great. If you've still got the old lock stuck in the hole like I did then I found levering the latch out from the inside of the door was the best way to get it to snap and detach from the spring.

I bought this product and was very easy to fit and replace the old broken one. Very helpful video too. Would highly recommend. Mark C

Best video ever. 20 seconds handle fitted. after watch that video. thanks a milion!

purchased one of these 2 days ago. Fits perfect ,fit it in 30 seconds after watching this excellent video. Well done X8R just saved me about £80 to £130 for a new glove box. You will need the spring though to keep the glovebox tight shut. Good as new.............

So pleased I found this! I will be buying one from you very soon!

Thanks very much for this. The c4 I bought had the handle broken off and it was an easy and cheap fix. (Once I had to check which way the spring went on)

Complimenti, il tuo video è semplice ed efficace, grazie mille per il tuo aiuto.

Great help! Thank you!

I have managed to change this but the new handle doesn't bounce back somehow😂😂 But it does keep the glove box shut so in the end not too bad... Thanks for this video👍👏

Thanks alot made the job even easier 👍

video was a big help thank you.

great just got one and save a lot of money work great

Thanks guys worked perfect.

very helpful, thank you

Awesome,your going to sell loads.

Great gadget, although not an easy fit, I must say. All in all, will save you over £150, so can't complaint!

but do i need to take the door off as shown or can it be done with the door left on

I’ve tried for hours on end and looked at several tutorials but it won’t install I’ve pushed with an extreme amount of force but it seems to just not work

I'm having a lot of difficulty popping this in, should i remove the entire glove box?

Don't you do them in black?

I bought your product on your site, impossible to install it without damaging the plastic of the door, it's money thrown out the window !

You have a link or buy this handle ?

Is this compatible with a Citreon C3 2003 model?

У кого-нибудь получилось ? Я не понимаю как он так вставляет , я вставил и потом два раза справа налево и нифига не идёт

where i can bay handle ?

тоже эта хуйня сломалась)))0