Clean up the exit chute of DF54 

Any food safe grease should do the trick.

I would recommend a small amount silicone grease. It is generally food safe/non-toxic and lubricates metal, plastic and rubber.

It depends on how often you grind. Usually once a week is enough.

Nice tip

Please follow ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UC7E52RtfMQ.html to get to the zero point first.

@@miicoffee Perfect thank you so much

Same here it is stuck. It’s like there’s a clip inside holding. All screws removed and it won’t come out

same! the video conveniently cuts during this step with a "just use a little bit of force..." explanation, but all that stuff is plastic... and you can see the outer chute binding on the inner chute... this might be the achilles heel of the DF54

Nor can I. Has anyone solved this puzzle of the DF54? I got the two top fasteners entirely out, got the small screw under the outside of the chute out. I suspect there is a total fines pile between top of chute and exit point from grind chamber.

@@lindas.1751 i was able to get it off, you need to take it off in the same plane as the chute... and yes, it will bind along the edges, you basically just have to pull... cleaning it helps w/ the mess for a little bit, but before too long it clogs again... but you can also unclog it w/ like a pipecleaner without disassembly