Clutch Master Cylinder Replacement Bleeding & Transmission Fluid Change Flipping Silverado ls - Ep2

Подписаться 62 тыс.

Просмотров 141 тыс.

50% 1

MityVac Get it amzn.to/2xOGQXT
GM Syncromesh amzn.to/2xOH69j
OTC Fluid Transfer tool amzn.to/2xO7f36
Flipping A Silverado - Episode 2 | Clutch MasterCylinder Replacement Bleeding & Transmission Fluid Change
Thanks for Check out my Flipping a Chevrolet Silverado Series!
I picked up this 2004 Silverado work truck for 1600$ and plan on repairing what is needed and trying to sell it for a profit.
In this episode I tackle a transmission issue, its a five speed manual and like to get give me some problems going into 1st and reverse gear. I try a couple of repairs but in the end it was something so Simple and Free. Join me in the fun.

Авто/Мото

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@Ratfink33 7 дней назад

You just saved me $$$. After watching this I went out and checked and it was the floor mat (which I moved) and I cut a small section (1”x3”) of carpet out and works just fine now! Thanks for the video 6 years later!!

@BUTGOD-j1x 2 года назад

Thanks for the video. Glad I watched to the end to see your "actual" problem. I have a 4.3 in my 2000 sonoma and it too is hard to get in 1st and reverse gears. I won't attempt to repair it myself, but watching your video will let me know what to tell the mechanic before I take it in. Appreciate you.

@BUTGOD-j1x 2 года назад

Update. I took out my floor mat to the Sonoma and it allowed my clutch pedal to go all the way down. Thus my shifter now goes into gears easily. Thanks again.

@tyetaylor8298 4 года назад

Man you made that look easy! I have an 89 Chevrolet Cheyenne with same issue stuck in my driveway. Can this work for me? Thanks

@p7979 6 лет назад

I have the same issue in my 07 silverado classic. Gonna give this a try. Thanks for the videos.

@Donnythelatemodeltech 6 лет назад

that would be awsome if it solved your problem, thanks for the support.

@badactor3323 4 года назад

Replacing the plastic clutch pedal worked for me. I compared the old with the new. It gets out of shape over time.

@p7979 3 года назад

@@Donnythelatemodeltech sorry for the 3-year delay !!! lol This was the fix for my truck 100% fix and is still working like a champ. All because of this video! Thank you... .3 years later lol

@bartolomena221 5 лет назад

Chevy dealer does not carry the 10-4014 bottle anymore? Is it the same as the 10-4006?

@oswaldoangulo4077 Год назад

The way to fix it correctly is to replace the clutch pedal Assembly... Very common problem with these trucks... Thay break where they meet with the master cylinder on the outer side of fire wall

@stephenjones1256 6 лет назад

I Have a 2007 GMC Sierra ....same BS....thanks a lot wish i saw this sooner would of saved me some money and embarrassment

@KevinW411 4 года назад

VERY helpful thank you!!!

@oldschoolgreentube 4 года назад

Standard Transmission. Millenial anti-theft device.

@Donnythelatemodeltech 4 года назад

Lol

@oldschoolgreentube 3 года назад

@@inanimateuser9828 The exception that proves the rule. Glad to see the art of the double clutch will live on.

@HarleyFXS Год назад

My 2003 Silvearado is the same way, got to slam the clutch pedal to the floor to get it in gear. But this was almost that way when new. I only have 24,000 miles on it now.

@Donnythelatemodeltech Год назад

Crazy.

@RonaldDaub Месяц назад

I plugged in my clicking thing on the transmission and it didn't click and now I can't drive my truck I lost the old plastic piece getting it down there and I used the used plastic piece that did not look anything wrong with it but I think that's a very bad system any help on this would be appreciated what is it with this clicking clutch line on the transmission

@g.s3301 3 месяца назад

My problem is on first gear jump like rabbit sometimes frm first to second gear No one can find what's wrong with that. Any suggestions?? 04 silverado 2500hd 6.6L

@annaperez7383 2 года назад

what type of fluid for the master cylinder and what type of fluid for the transmission and what type of fluid for the clutch?

@mrwhite1957 2 года назад

Always dot 3 in the gm hydro systems tranny check owner book but all nv3500 call for synchromesh

@427yenko67 4 месяца назад

Your problem is the same as mine...its that BS NV3500 transmission.

@larryenglish9063 Год назад

How do you adjust the clutch pedal on an 2003 chevy 4.3 5 speed

@kellismith4329 Год назад

Pretty much by bleeding it, if the slave cylinder is leaking, you are in for a trans r&r to swap it

@RonaldDaub Месяц назад

The air will eventually work itself out

@jamesdavidson1124 3 года назад

What about on a late 92 early 93 4x4 gmc extended cab 2500

@jamesdavidson1124 3 года назад

I have the same problem with my transmission too grinds in 1st gear from a stopped motion same with reverse gear too but the other gears nothing stopped or moving, they have no problems

@donaldcausey4900 2 года назад

I need a video that show exactly how to take out the slave master master cylinder in a 2000 chevy truck 2 wheel drive 6 cylinder

@kellismith4329 Год назад

Remove the trans to access the slave

@mktampabay1 6 лет назад

Was yours made in Mexico? Apparently a lot of the 4.3's that were made in Mexico had the wrong master cylinder installed. There is another one for $99 at gmpartsonkine with a longer rod that is supposed to fix this issue. I just ordered one for my 06. Hopefully it fixes the issue, fingers crossed

@Donnythelatemodeltech 6 лет назад

Good info

@mktampabay1 6 лет назад

TheLateModelTech2.0 I'll report back to let y'all know if it works. Was yours from Mexico?

@JohnMotschenbacher 6 лет назад

Matthew Kendall what did you find out?

@mktampabay1 6 лет назад

John Motschenbacher didn’t seem to make much of a difference. I also didn’t bleed it though so there’s a chance some air got trapped when I swapped masters. Need to get myself a mightyvac. I did dig a little foam out from under my floor mat and it helped a bit.

@JohnMotschenbacher 6 лет назад

Matthew Kendall thanks for the update. Sadly I tried the mightyvac to the top master cylinder port to remove air only to basically have no clutch now. 🤔

@ManuelHernandez-ft8bi Год назад

What size is the transmission plug

@kellismith4329 Год назад

3/8” square plug

@fcamtero 5 лет назад

Anyone knows type of fluid oil for manual transmission Silverado 2006?

@Donnythelatemodeltech 5 лет назад

Gm manual trans fluid right here amzn.to/2yWpKFS

@fcamtero 5 лет назад

Thank you

@cmdr_talikarni 4 года назад

Issue on these trucks is once they age, the slave cylinder goes out every 25-50K miles. On my 06, I am about to do mine again at 180K, was done around 155K.

@cmdr_talikarni Год назад

And now at 200k it's time for another slave cylinder.

@Wanous-hv7zo Год назад

@@cmdr_talikarniyour stupid

@erikcoslik5800 Год назад

What a headache

@wh877 4 года назад

I have new clutch , slave , and master. Done all the bleeding methods and Still the pedal is crappy. and having short legs sucks. I zip tied a thick pad on the pedal for better reach. Not sure what I am going to do next.

@lawlessred 2 года назад

Put a nut in between the slave cylinder rod and the clutch fork. Takes up the space.

@wh877 2 года назад

@@lawlessred no fork on this style. slave cylinder is round , slips over the shaft and is inside the bell housing

@badactor3323 6 лет назад

Might the problem have been the slave cylinder?

@Donnythelatemodeltech 6 лет назад

+Bad Actor very possible, dropping the transmission was the last thing I wanted to do. Removing the material from the firewall seemed to do the job. I didn't have the truck long enough to see if this was a long term solution. Thank you for watching and commenting!

@badactor3323 6 лет назад

I’d be worried that longer travel might deform the plastic part of the firewall where the master cylinder meets.

@ExplosiveGarage 7 месяцев назад

You need a new slave cylinder

@Mark-gg6iy 2 года назад

Today a very experienced NAPA Auto Parts salesman tried to sell me 80W90 gear oil to use in the clutch reservoir. The guy at O'Reilly's did not know that the fluid is DOT brake fluid nor that DOT 4 is compatible and better than DOT 3 TMK in all applications. Trust no one. Trump Univ. School of Competency.