CNC Maintenance Training: Fanuc PMC - CNC Areas of Responsibility.wmv 

Any updates.

Sir,please provide us other videos.

what will cover in your online training course? i want to learn the servo alarm,servo guide software on inline monitor axis behave, and troubleshot, thanks. and how to contact you?

Where r other videos

any experience with DMG DMC mills and Fanuc 32 i? i can't edit enable i can't change way oil timer

@@fredrezfield1629 Timer and Counters ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YzxjYQLs_Ic.html Only TMR timers can be altered without editing the ladder. DMG will lock this out with a password. See this video for an explanation

@@johnrobbins9439 i don't have nay of those my machine is a DMG DMC any experience with those machines? i can't seem to EDIT ENABLE or PWE

That does look strange. I believe that F122.0 (HDO0) is the output status from the CNC to the PMC. It shows the status of the high speed skip signal (HDI0) that is input on connector JA40. It looks like HDI0 is the actual real world input. In this case, it's not an X input since the CNC is reading it directly- not via the I/O rack.

To an extent. The Fanuc control has an option that allows it to interact with Allen Bradley. This is typically done via an Ethernet connection. You would still need to set certain G-addresses in order to run the control. An interface would need to be written to handle this. Hitachi Seiki did this with their Seicos Doctor. It would be easier to have it written in Fanuc Ladder III.

@@johnrobbins9439 Thank you for your reply 🙏

I'm still hoping to get something together for the online training. It is turning out to be a very complicated process. I will post something here when it's available.

The training classes are open to anyone. The next open enrollment class is scheduled for October 2nd in Nashville, Tn.

john robbins sir... I m from india so it is not possible to come there.. So i just wanted to know that is there any degree or higher qualification required for doing cnc electric maintenance.

It can be locked several ways. What model of control is it?

John Robbins It's a series 21. Thanks for your question.

Keep relay K17.0 = 1 will hide the ladder. Set it to 0. If you are not able to change it the ladder may be controlling it. You will need to speak with the builder.

I will try it, thank you very much!

hello osmar have password the ladder in your machine?? at the moment of check the ladder??

You can contact Tennessee Industrial Electronics to request a quote. www.tieindustrial.com I teach ladder logic and screen navigation online.

Fanuc & Siemens controls..