No video :(

CNC Router Raised Panel MDF Doors With Vectric V Carve - No Special Tools, No 3D Tool Paths - EASY!

Подписаться 31 тыс.

Просмотров 7 тыс.

50% 1

We get asked how to make MDF Raised Panel doors on a CNC router without the use of a 3D model, molding tool paths, or special form tooling. In this video, I will show you how to design and program a raised panel door using a standard V bit and a Down-cut endmill. This can work on any CNC router and will work with Vectric V Carve and V Carve Pro.
You can download the Vectric Files (in V Carve Pro) here: bit.ly/3swSXWH
If you need it in another format, please email us at info@stepcraft.us
www.stepcraft.us

Опубликовано:

29 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@thirteenbravoflagsandwoodworks 11 месяцев назад

Well done. I was asked by a customer to do a kitchen remodel and could not figure out a way to accomplish this and had to turn the job down. Very useful information for the future! Thanks Eric

@StepcraftInc 11 месяцев назад

Glad I could help. I am working on another video now regarding Doors but without V Bits and allow for more customization

@JamesSmith-zq9kx 5 месяцев назад

Great video! Just did an inset flat panel and came out perfect!

@terryhuber327 11 месяцев назад

Outstanding! Thank you Eric

@StepcraftInc 11 месяцев назад

Glad you liked it!

@alterstassfurter5743 11 месяцев назад

can't wait for my M1000...1st I have to finish my workshop in the basement...👍👍

@StepcraftInc 11 месяцев назад

We are excited to have you as part of the family! Let us know how we can help in any way!

@ABFextension 6 месяцев назад

why you dont use profile inside by vbit tool- with corners (sharp internal corners)

@Alya61 11 месяцев назад

Hi from Türkiye. Thanks for the video. The fact that you managed to achieve such impressive results without the need for specialized tools or complex 3D tool paths is truly impressive. I'm curious if your CNC milling machines in the D and M series are compatible with Alphacam. Do you have a Post Processor developed for this? Is there any other channel, similar to the "toolstoday" , creating Turkish for Stepcraft, aside from Stepcraft Turkey? Best regards..

@StepcraftInc 11 месяцев назад

I am not familiar with Alphacam. Email support@stepcraft.us and we can look into it for you. I am not aware of any other channels like Tools Today... I am sorry

@ericdevarney4089 6 месяцев назад

there is a much easier way to do this, no need to use profiles. Everything is done in Modeling

@magicman9486 5 месяцев назад

could not turn my volume up high enough to hear the video.

@acerjuglans383 11 месяцев назад

I watched a video last year, and was able to do basically what you just did, but I used two V bits--90 and 120--and a 1/4" endmill, plus a 1/8" compression for the profile cut. I also made fake vertical lines between the stiles and rails, so the whole door looked like a true 5-piece door. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P0Dv_ixWnoI.html

@StepcraftInc 11 месяцев назад

I never saw this video before. Very good info. I released a new video today that uses the molding tool path in V Carve Pro and I also added info about how to make the fake vertical lines. Thank you for sharing.