COMPLETE 2010-2015 3rd gen Prius Head Gasket replacement "how-to" step by step

Подписаться 21 тыс.

Просмотров 213 тыс.

50% 1

FINANCING AVAILABLE.
NO CREDIT CHECK AND NO INTEREST IF PAID IN 100 DAYS
CLICK TO APPLY:
consumer.snapfinance.com/#/?m...
DO NOT TRY THIS IF YOU HAVE LITTLE MECHANICAL EXPERIENCE
YOU MAY DAMAGE ENGINE
this is the complete how to DIY head gasket replacement video
WATCH EVERY STEP (no skipping)
another MORE DETAILED video is on its way
it will explain every tool needed (available from us)
for questions or advice 209-305-1672

Авто/Мото

Опубликовано:

21 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 498

@shabeermahar5898 Год назад

I am a retired Toyota technician. I just ran into your this video. You guys are very thorough, and I like the sequence of taken the head a part . Keep up the good 👍 work ❤️

@caseypage2 2 года назад

Thanks for making this. I’ve never changed a head gasket before or taken a motor apart. I followed the video and was able to fix my 2012 Prius V where the head gasket failed. It’s running great now. I contributed to the beer fund. Thank you.

@toyotacamry1239 2 года назад

How long did it take u

@caseypage2 2 года назад

@@toyotacamry1239 I worked on it 3 different days. First day removing everything up to the timing cover (2-3 hours) - Second day removing timing covers, cam covers, and head, then cleaning all of the parts (3-4 hours) - Third day was reassembly, I took my time to get it right. (5-6 hours). I had fun doing it all. A battery operated right angle right angle ratchet like the one being used in the vehicle was a must have for me, made things much easier.

@toyotacamry1239 2 года назад

@@caseypage2 oh nice thats not bad So what is the right angle ratchet ?

@ingalway 2 года назад

Hi. Are you a total novice on engine repair/car maintenance or do you have some experience?

@caseypage2 2 года назад

@@ingalway I just watch youtube and figure out how to repair stuff myself. I've changed water pumps, starters, alternators, motor mounts, ujoints, shocks/struts, ball joints, etc... but I've never torn an engine down like that before. If I was a total novice having never changed any parts on a car, I don't know if I'd try this myself.

@aptpupil 2 года назад

These guys are great and very helpful. Couple notes for newbies... Get a fel pro gasket kit from O'Reilly. $200? Get new head bolts. $50 Get new timing chain tensioner. $50 Get coolant, 2 gallons Get oil Might want to replace water pump at the same time $320 from stealership. Local stealership wanted $5k+ to do this job. Most shops just wouldn't do it, or wanted to replace entire engine. I did it because of an error code for misfire on cylinder 1. Check Chris Fix video on how to diagnose if you have coolant leak. After I replaced head gasket I had P0016 error because timing chain jumped. Sounded fine, but code kept coming back. Realized I should have replaced the tensioner after rewatching this video. Was able to move chain by loosening cams and moving chain one link. Replaced tensioner. Problem appears to be solved. Hope it helps.

@alnascar97 2 года назад

I just did mine and think the chain jumped as well. How did you realign it without removing the timing chain cover

@alnascar97 2 года назад

I see you loosened the cams. Will try that

@aptpupil 2 года назад

@@alnascar97took cover off and loosened the camshafts. Tilted them up and was able to get chain loose enough to move it one link. Good luck. Replace tensioner

@alnascar97 2 года назад

I had to remove the timing chain cover. The repair manual helps allot as it states clearly to rotate Engine counter clockwise and also has measurements to check chain wear from stretching. The other point not stated in any videos is the painted chain links only line up every 70 crankshaft revolutions. So although it may appear like the chain marks are off it takes many turns to bring the painted links back to the starting point

@goneviral6037 Год назад

@@alnascar97 what repair manual did you use? Where can I buy it? Thanks

@jalendudley7260 3 года назад

This guy is a life saver!! I was stuck on the side of the road with a popped tire with no idea what to do and Walter here saw me and helped me get and install a new tire. A real awesome dude with and aspiring story. Keep inspiring others man!!

@midris5741 Год назад

I both H Hh

@Thathustlebus 7 месяцев назад

What are you babbling bout?

@bumpee978 2 года назад

These guys are what you call professionals amazing they did this in what was 45minutes to a hour.

@joharescrz 2 года назад

Thanks Gasketmasters! Took me two weeks waiting for parts and machine shop but it's done! Couldn't have done it without your video.

@michaelblosser2455 2 года назад

Hands down the best HOW TO I've ever seen! Others spend 10 minutes explaining in excruciating detail which way to loosen a bolt! I know that...just show me what needs to come off!

@gasketmasters 2 года назад

Yup

@kalinovskiy 2 года назад

Great video! Gave me the confidence that I could do it. Some things I wish this video mentioned. 1. DO NOT MIX UP THE ROCKERS/STEM CAPS/HYDRAULIC LASH ADJUSTERS!!! Keep them all labeled and return them to the same spot you remove them from, in the head, on the valve after machine shop, and do the same with your head bolts if you decide to reuse them. Especially in high mileage engines those stem caps and rockers wear into their spot and become specific. "might" not work best in a different spot if the valve clearance is too much off. It will still run but you might have a slight clacking or ticking sound when its all done.

@JohnDiMartino 2 года назад

That’s standard engine disassembly protocol…. probably why it wasn’t mentioned. If your a beginner,the factory service manual and read8ng the areas you will to working can be worth it’s weight in gold . For engines we don’t do a lot of simply use cardboard box scraps and a black sharpie to mark and place bolts,tubes,pushrods and use egg cartons for the rockers and valve poppets,

@kalinovskiy 2 года назад

@@JohnDiMartino You are right, I should have totally read the shop manual before. I disassembled after watching this video thinking that looked easy enough, then realized that I had too many questions this video wasn't giving me answers to, so that is when I read the shop manual. I reassembled after reading. I mean it works and drives great but there is a very faint click/clack that mostly goes away when the engine heats up. Don't feel like taking things apart again to fix that, so it will have to do.

@wespeters8412 2 года назад

@@JohnDiMartino I took the rockers off without labeling. Is there any way to get a hold of the assembly manual so I can find the correct order to put them back on?

@wed3k Год назад

Valve clearance with a hydraulic adjuster? There's a first for me

@lowerbuncombecoachworks3384 2 года назад

Outstanding. This has to be one of the most concise and clear youtube videos I have ever seen. Bravo guys, I will definitely be contributing to the beer and pizza fund!

@JustMe-ld2cu Год назад

Guys be careful!!! I own a shop, a hoist and tools better than the one he recommends and trust me he’s skipping steps that are obvious steps for him but not for DIYers. It takes a lot longer than it seems and is trickier than it seems. Another tip: keep nuts, bolts and small pieces in marked cans or cups and save yourself hours. Also wear gloves so that those stupid hose clamps don’t carve your hands and fingers.

@stevehicks6145 Год назад

This is great video, but you’re right. There are several I noted after doing this as a newbie: the engine mount, he starts on the engine mount bracket** but never shows or instructs to put the mounting block back on. Silicone on the timing chain cover… don’t fucking do what I did and follow this video before having the timing chain done. They assume your timing chain will just line up on those marks, but never offer up “if it doesn’t, do X. For anyone struggling with getting that to align, just loosen the 12mm bolt with the paper towel holding the cam in place and then take a 14mm and slightly turn until the pulley marks/ top dead center merry up with the chain markings. As a result the silicone dried on my timing chain cover and I had to scrape it all off and start again- what a pita. There were definitely a lot of gotchas. They said silicone getting into bolt holes don’t matter, not true if it dries before you get your bolts in- it makes it a pain to get bolts into bolt holes with dry silicon. I don’t think they went over exhaust gasket when reassembling the manifold. I forgot it. A lot of good stuff in this video- between this video and several others I got through it and the enginer started. Just wanted to provide some fair warning to anyone trying to tackle.

@alexandriah5928 6 месяцев назад

This video saved me $4400 in labor. Thank you Gasket Masters. May your RU-vid channel and careers be blessed. Also, thanks for the tips along the way. 😉 THANK YOU!!!

@gasketmasters 6 месяцев назад

Awesome. Thank you.

@GoddessALove 10 месяцев назад

I love how detailed you are! I’m def gonna use your video while doing my head gasket! Thank you!! 💖💖💖

@Retro.Nostalgia 3 года назад

Thank you so much for this!! its nice just to watch someone else now I feel confident for my next 3g prius head gasket

@unclejay9205 3 года назад

God bless you guys. I did 2 prius already. There is no way i would of been able to do it without this channel. My brother wrecked his so he's getting another one. So i might do a 3rd.

@CapnBio 2 года назад

The most detailed explanation I've seen. Literally tells me everything and all the steps needed to get it done

@jakemarney7773 2 года назад

Awesome video thank u helped me out 2011 Prius misfire #2 replaced gasket by watching this vid took 1 day very helpful

@mmoon1860 3 года назад

I wish we have some engineers like you guy’s here in UK I need my car head gasket done but I don’t trust any garages here to do this job without the destroying the whole engine!! Great jobs guy’s 👍

@wizwiz-pr7jg 7 месяцев назад

Changed prius head gasket with basic mechanic skills with this video. You guys are awesome to put this together and it be so detailed. thank you!

@edgalang 2 года назад

After scouring the internet, this video is what finally sold me to use these guys! Called, and after 1 ring, Sarah was able to setup a mobile appointment 3 days from now.

@jonbaugher7919 Год назад

Best video out there on this job. Was able to get my Lexus CT 200h back on the road using this video and the repair manual as guides. Only difference was I used a 10 mm bi-hexagon for the head bolts. Contribution made to the beer fund! Thanks!

@jamesgoodine Год назад

All I can say is you guys are the best I finally tore into my 2012. I was so apprehensive about the head bolts that the car became a lawn ornament for almost 2 years. Anyway necessity made me man up and get a couple sockets I didn’t have (triple square and internal torx). Cleaned up the garage and reorganized my work bench at home and tore into it. I think I had more time in cleaning / organizing to prepare for surgery than I did tearing it down. Gotta run by O’rileys after work and order my gasket kit and head bolts!! I’ll be donating to your beer / pizza fund you saved me a boat load of cash!!!

@misscuterthanyouable 2 года назад

Used this video to help me replace the head gasket on my Prius. Very detailed and helped me ton. Thanks so much for the video. You guys are awesome.

@danielcruzrodriguez1444 Год назад

Did you send your head to a machine shop?

@Adam-oo7tn 2 года назад

Really helpful DIY for those who aren’t mechanics!! Thanks a lot.

@chriswinslet6696 8 месяцев назад

I'm a retired Toyota tech. I love the pace of your video! You're thorough and efficient.

@munirfeyisel1022 2 года назад

Hello, I don't have enough word to say thank you 10k times!!!!!!!! You save my life, I don't have enough money to get fixed and I ended up doing it myself!! Thank you 10k times!!!!!!

@sheldonsutherland9576 Год назад

I added to the beer and pizza fund! This awesome video walked me through the whole process of replacing my head gasket in my 2011 Prius. One thing I would definitely add to this video is that you want to make sure to clean the egr pipe, egr cooler and intake manifold. I feel like those parts being gunned up are what is causing these things to blow. Adding an oil catch can solves the gum up issue from what I have read, so I went ahead and added one of those as well by following the nutz about bolts tutorial. Thanks again guys!

@AmsYourRave Год назад

Using this to help me with changing my own head gasket because I can't afford a professional atm. But this video is so detailed I think I can handle it all on my own. I have the tools and everything because my partner used to work on cars himself.

@jeremyturner2082 Год назад

Thanks this is a great video. I’m a honda tech and just wanted a visual of the process. Video did a great job and definitely feel more comfortable digging into the Prius next week.

@Megacatares 2 года назад

I have worked on cars for a long time, all kinds of jobs. My beloved prius at 250k got a cylinder 2 head gasket leak (confirmed with bore scope cam). I wanted to do the job myself (as always) but also wanted to space out and not think while doing it. Well boy was this video helpful for that venture. The background music was great as well. I am very appreciative of this video. Do you all have a paypal or something that I can throw some bucks to? I think this is a great video and it deserves that recognition. I also used the felpro head gasket per your review, I also installed a catch can setup/egr/intake manifold system cleaned - thank you all so much and take care.

@natividadangulo 2 года назад

Thanks for the video! Used a lot of your tips and tricks fixing my Prius. Definitely made it go by quicker.

@thomasreffle8313 10 месяцев назад

These are very good technically and are quite kind to teach everyone. Obviously, they have done this many times. Well done.

@kluskurs 2 года назад

Thank you for making this video. It makes it so much easier. You are a godsend.

@markconley9279 2 года назад

Straight to the point, step by step. I wish all how to vids were like this. 👍

@69Gooose 3 года назад

They replaced my Prius head gasket and were extremely fast! I was reluctant because I thought the noise could be due to a combination of spark plug/ ignition coil/ and dirty EGR. After txting their number for advice they said it’s the head gasket, without any hesitation. I took it into their shop and sure enough, head gasket was shot and leaking coolant. So if you’re a Prius owner, the moment you start noticing a loss of coolant and hear an occasional engine knock... replace your head gasket! Luckily I caught this in the early stages. Thanks gasket masters! 10/10 would definitely recommend their services. Unfortunately, it doesn’t seem like any Prius Gen 3 is safe from this notorious problem. I’m sitting around 160k miles and this is the first issue I’ve had with my car. Lastly, I should mention that their services are extremely affordable!!

@00O000OO 2 года назад

What year gen 3 are you?

@ophrasbankaccount7716 2 года назад

What’s was the cost

@oliveradams4463 2 года назад

What was the cost?

@richardchan2599 2 года назад

What the pri e around?

@dreamercreep2124 2 года назад

A have them a call a couple months ago they actually answered or called me bk . Don’t remember . . They r cheaper than a dealership. I already knew it was my head gasket. But was hoping they would say diff.. I work on all my cars dads a mechanic. But that shit is a lot of work u do need a space & time & always have the right tools or u r going to b driving back & forth to AutoZone & oreilleys .lol I just put headgasket sealant . I was broke & needed car to make $ I’m at 10,000 miles after sealant it just started knowing. Rattle again. Will b trying to do it ourselfs. But if we have no time fuck it . I’ll pay him.. I found another mobile mechanic. At $100 more than them said he can do it in a day. Will see..

@MichaelChanslor 9 месяцев назад

Thanks for all the videos on Gen 3 Prius - You guys are amazing!

@mohammedshafiq4053 2 года назад

Mate i watch your video and i done headgaskit on car that was awsome to do my car run nice and smooth thanks for that video i am very happy to work on my own car and save money very nice bro thanks

@cubul32 3 года назад

Fantastic tutorial. I can't like this enough. Thank you.

@chayan1456 2 года назад

I just replaced my 2010 head gasket, and just finished it, these guys were awwwsooome, it was hectic as it was my first time ever opening the head, I had to go back and connect the coolant temp sensor on the head, but I learned, thnk u guys so much

@gasketmasters 2 года назад

You’re welcome.

@shirleybender 9 месяцев назад

Thank you so much!!! VERY HELPFUL! We start soon with our Prius and I want to be able to HELP my husband.

@scotthill966 Год назад

This video was hands down the best diy video I have seen on RU-vid. I can't thank you guys enough. I do most all of my own auto repairs. I just finished replacing the motor in my daughter's Ford Ranger 4.0L which suuucckked!! I have swapped motors in my Colorado, I've replaced head gaskets in Pontiacs etc. We have had this Prius about two months and I was very anxious about doing this. I started it Thursday evening and took a couple days off due to heavy rain and not having a shop to work in. I just finished it this evening and it runs great!!! Thank you guys.

@danielcruzrodriguez1444 Год назад

Did you take your head to a machine shop for inspection?

@ikew3150 Год назад

@@danielcruzrodriguez1444 I didn’t. But checked it myself.

@channel-hm3kz Год назад

Just wanted to tell you guys thanks! I'm a seasoned mechanic, but it's always nice to have a good video to follow. Once i got my car all buttoned up, I was confident it was done right! Agan, thank you guys for the help!

@NoSuffix Год назад

Great video! I don't need to do this yet but it's good to realize that I can do it myself if it's ever needed one day.

@sbramel93 2 года назад

Thank you so much for helping me replace the head gasket on my 220k mile 2012 Prius V. I used this in addition to the Toyota service manual. I got the engine seal kit from Toyota with the head gasket and all engine seals. It was a pain to do this job and took me 61 hours, but it’s done right. Sending $20 to you guys for the pizza & beer fund. Cheers! EDIT: do you guys have Venmo?

@skorpyo331 9 месяцев назад

Omg this was awesome. Doin intake cleaning tomorrow lol. After watchin this vid im confident now in becoming a dentist.

@leifhietala8074 5 месяцев назад

Wow, that is a comprehensive vid. Clearly you guys have done a bunch of these; you make it look easy. It's pretty obvious to me that if you're going to get that far into the engine, now is definitely THE time to do a lot of stuff you might have been putting off: plugs (obviously), coil packs maybe, thermostat, water pump, etc. If you're going to tear into the car, make it count.

@springer-qb4dv 3 года назад

Awesome video - god send for anyone attempting DIY head gasket replacement. The tips for securing timing chain and gear position during disassembly is fantastic. Thank you! One thing I would add is that you don't need special E8 torx socket to remove EGR cooler. You can remove front stud using 6mm socket and rear three studs don't need to be removed. Just remove the 12mm nuts. Everything went smoothly, and even replacing bent cylinder #1 rod wasn't bad. Only thing that really got screwed up was putting back the motor mount. Bolts used in Toyota motor mount frame bracket are rubbish!! It cross threads so easily and ruins the threads.

@SnocashMC 2 года назад

I’m having trouble understanding your tip. I have the three nuts removed (2 on the pipe that goes to the exhaust and one that holds the lower arm to the block) I removed the stud in the front with a 6 mm but I can’t get the egr out of the way, the bottom stud is stopping me from sliding it out of the exhaust

@metrork1 2 года назад

@@SnocashMC I just used a hack saw and just cut the bottom flange of the EGR. No more problem with the hard to get at bolt.

@charvakkarpe Год назад

@@metrork1 I spent an hour getting that lower stud out for EGR cleaning. I was wondering if I can just skip reinstalling it. I guess I will, it's not worth the trouble.

@metrork1 Год назад

@@charvakkarpe I eliminated that bolt situation all together. Yes, leave it out. I did and 4 years latter, no problem.

@NoGasWelcomeAboard 3 месяца назад

5/01/2024 - Working on job right now! Instructions in this video and pause/rewind YT functions has been invaluable. Thank you Gasket Masters!! This was my first day and made it to 10 min point in video. That included getting organized & cleaning the EGR/Cooler/intake manifold, which were packed with black goo. At 250k miles they were filthy! Am using two full size folding tables to lay out parts in careful order as they are removed. Another smaller one holds my tools. Being organized is the key to success with DIY project like this. I purchased Fel-Pro PT-1 kit and new head bolts off Amazon before starting this job. Won’t replace water pump, chain tensioner or other parts unless they look bad. Tomorrow will be big reveal! Hopefully no obvious damage to pistons 🤞. Due to mileage, may take head to Machine Shop for professional attention. But that depends on how everything looks when it comes off tomorrow. Wish me luck…

@helpfulfriend9713 2 месяца назад

How’d it go? Looking to start mine in a few days

@Lekosa1000 Год назад

This video is absolutely great! I would say before you start the process disconnect the battery and High Voltage system on your Prius.

@AL-RCjunkie Год назад

My 2011 Prius recently started with the dreaded, "morning rattle" nonsense- a telltale sign my head gasket needs replacing. Just flipped 200k on the odometer and I can't justify spending 1500-2000 bucks having it replaced at a shop. I've got exp DIYing car repairs-brakes, bearings, etc. But anything under the valve covers terrify me. This video might have inspired me, though. At least it's made this task seem a little less terrifying, for sure. Thanks for putting it together so well. The video-and the motor.

@PilotSteak 2 года назад

SERIOUSLY A Lifesaver! I started having the weird raddle issue, and Immediately took it to a shop. "We don't work on Hybrids, and can't diagnose", the Dealer "It'll be $4500 plus tax", and calling prolly 20 other shops that don't work on Priuses. After talking with a friend, "I'll do it myself" Get on RU-vid and THIS was the first video that popped up. OH! These guys have a location in My area! Call, and a couple days later he was already going to be in my area! What I expected would be a Multi-day repair (Toyota Shop said 19 Hours of shop time) was done in a few hours. Loving the quick service, and YES, you'll get more work down the road from me! Thank-you Again!!! (Too bad I can't say Love to this video, cause it DESERVES IT)

@Zt3v3 Год назад

NIce video. I've got a CT200H Lexus in the lineup that needs a head gasket and this is a great "how to" for that one too.

@edwinpitman8832 Год назад

Great tutorial. Was a tremendous help replaceing my head gasket. Tahnks!

@grapeknutz 2 года назад

being a retired mechanic I real enjoy a very professional techs do this job!

@wannafly34 11 месяцев назад

What a great video! I have a 2010 and a 2013 - good to have if (or probably more like when) I have to do this job on either of them!

@Alan-gz1kx 2 года назад

Not sure if I want to tackle this myself or not (not a skill issue, more time... never done something this 'deep' before, but I'm very mechanically savvy and nothing done here worries me much), but I have *really* enjoyed your video. It is very through.

@nasrullahmahmoodi677 7 месяцев назад

I did more than 5 Prius head gasket replacement myself after watching your video, it took me form 3 months to even 2 days for each one, depends on the car issue and the time I dedicated to work. But your video is dust of gold, thank you so much for sharing your knowledge for free! You are the man; God bless you guys!

@gasketmasters 7 месяцев назад

Good. Maybe you can be a GM rep

@jayklarquist7912 2 года назад

Excellent and to the point demonstration.

@rvalentinjr3182 9 месяцев назад

It has been 2 years today (8 OCT 2021), since I fixed my 2010 Prius from the bell of this wonderful video. I have never stripped down an engine to replace a blown head gasket. When I got to the block, the #1 cylinder rod was bent. I was in communication with you guys and received a couple of parts to help fix my Prius. After giving the keys to my daughter, she still driving the car 2 years later. Thank you once again. God Bless!🙏🏾

@noahkuhn1336 8 месяцев назад

Did you fix the bent rob?

@fortunatocostillavargas7976 5 месяцев назад

@@noahkuhn1336 I think he did when he stated that his daughter has been driving it for 2 years since. It helps Gold to read most if not all comments since there are always handy tips from other's experiences overlooked by these videos. Have a nice day!

@noahkuhn1336 5 месяцев назад

@@fortunatocostillavargas7976I’m not reading almost 500 comments 🤣 get bent

@speedyrepaircoinc.8893 Год назад

your guys the best we keep watching your RU-vid thanks

@N7492 10 месяцев назад

Excellent video! You guys make it look easy.

@MateoJFR 2 года назад

My mechanic wants $4500 for this job! What the hell? This looks tedious, but nothing strenuous. All for a $200 part. Thankyou for the easy, clear, step-by-step instructional. You’re literally saving me thousands.

@BlackAssCrum 2 года назад

Don’t pay $200 for the head gasket.

@shanemellon9693 3 года назад

Thank you for this!! And thank you for the beer fund def giving to it 🤙🤙

@HGEntertainmentTV1 2 года назад

Thanks. I just replace mine, and it solve my problem. Huge saving...🙏

@danielcruzrodriguez1444 Год назад

Did you have to take your head to the machine shop?

@scottxiong5844 3 года назад

Nice video recording! Appreciate the work guys! Sending some tip your way ;)!

@gasketmasters 3 года назад

Thank you, Scott. All of us got taco truck for lunch. ☺️☺️☺️

@ZiRoman78 2 года назад

Thank you guys, I fixed my Lexus CT200h

@riceburner4747 3 года назад

Taxi engine bays are pretty clean AND engine was. Looks like they changed oil often. U guys ate awsome. U make it look so easy but I know its not.

@Jozplatte 3 года назад

Just what I needed, Thanks a lot!!

@TimZ007 Год назад

For those who suspect a head gasket and are getting a misfire on start up after sitting. Usually its worse after sitting longer. You can remove the oring from the coolant overflow tank which de pressurizes the system. If you misfire goes away to clears up a lot you can bet you need a head gasket. You can drive it like this for a while especially in cool weather. You may have to add water daily if you drive hard and coolant boils out with it not being sealed system like this. I drove mine 2 months like this but it started misfiring again and I did the gasket myself. I used honda bond for the sealer and reused every gasket but the head gasket and head bolts. Im 50k miles with no issues on it so far. I do think it my seep some where the tensioner is from lack of replacing the gasket but no drips.

@foyjamez Год назад

that's impressive.

@ahmadmanawi2879 Год назад

Which o ring do you remove? Just bought a 2010 and had bad vibration after it sat for over 24hrs.

@MrPicoli 11 месяцев назад

I did mine 4 years ago .didn't changed the bolts and I guess that's why I'll have to do it again tomorrow after 90k miles...

@bobrainy5324 Год назад

I forgot to hook up my pcv hose. It started, made a horrible rattling noise and stalled. I almost had a panic attack, What a horrible feeling. I can tell these guys got that same horrible feeling thinking they ruined and engine, when it was just a hose not hooked up. . lol Thank you for the video!

@mattaitchey4917 2 месяца назад

thanks for this video it has been a life saver!! :) .. at 297km my engine inside the rocker cover is FILTHY compared to this, so much varnish! i can not understand how this taxi engine can still be so clean

@user-fk8ed6il4g Месяц назад

You describe every detail, like it. Could you make a video every Toyota engine?

@billhopkins9681 Год назад

Just spoke to Jack at GasketMasters. Incredible, great advice and will definitely reach out to if I need any parts or advice on my upcoming head gasket install.

@JUNJUN-lw2vr Год назад

You guys just knocked that out with a quickness.

@kashkaaniaspen5799 2 года назад

I wish there was such thing as an honest mechanic in my area.

@Zero-23 3 года назад

Great job guys!

@bathvanityexperts Год назад

Just found the channel, subbed and am likely going to have the guys put a new motor in a family friends ‘15 Prius soon. She drove it 250k miles in 7.5 years and a head gasket leak seized the engine and bent a rod. The Toyota dealership in Roseville, Ca is a rip off.

@StefanSteinerWA 2 года назад

The only thing missing appears to be the torque settings for the head bolts and any other bolt that needs a specific torque. I plan to do this one day and I imagine I will be able to find all the needing settings. This is just the easy stuff anyway but love how the video covers the difficult things.

@SidewaysGts 2 года назад

FWIW the head bolts on this prius are torque to angle. If i recall properly, you torque the head bolts to 36 foot pounds in sequence, and then tighten them 90 degrees in sequence, and then a final pass with an additional 45 degrees. Definitely double check before attempting- but thats the general idea.

@lawrencekdog6243 2 года назад

Excellent tutorial---many thanks

@jackbranham4998 4 месяца назад

That video was very knowledgeable. Thanks.

@fatikhangasimov8620 3 дня назад

Great video. Thanks for very detailed video.

@Rev22-21 2 года назад

Nice to know if mine were to need this repair.

@radioactivelight 10 месяцев назад

Best tutorial for this I’ve seen Well done My only complaint is the repetitive music, it’s not a deal breaker but….. Maybe pick 5 background music selections and rotate them at intervals that coincide with individual steps in the process What can I say, it’s the internet…. everyone has one! (or is one, lol) Keep up the good work! BTW I produce a long running reality TV show on the World Fishing Network Our show is in its 16th season

@bobking8415 Год назад

Absolutely fantastic video! I would consider my automotive skills to be intermediate and have never attempted a project of this size. Your video was easy to follow! New head gasket is in my 2011 Prius... it fired up and has been running smooth for 6 weeks now without any oil leaks or issues. You guys are incredible! Thanks for creating this video!

@marcoserbach3848 Год назад

My 2013 start to little misfiring on cylinder 1 at 275k miles... I think it's time to a new gasket! I'm used to fix european shit so I'll give a shot changing that gasket!

@ZMANPERF 2 года назад

Excellent video. Thank you.

@deepakpandey2999 5 месяцев назад

Tomorrow i have to remove the gaskit for this model thanks for the tips😊

@r4lak 3 года назад

Great video thank you!

@billylyle1 Год назад

Very efficient...Great job 👍

@chrisspanyer1525 2 месяца назад

Great video. That must have been a pour and go sealer. The other type won’t clog up engine or radiator blue devils type that’s more involved with having to flush cooling system first and remove thermostat it’s basically liquid glass. It turns to glass when it encounters hot surface. The stuff you pulled off headgasket was a goo. Glad I didn’t use that type. Chris fix has a good video on headgasket sealers. Thanks again for the great video

@209lapko Месяц назад

A brilliant Job 👏🏾👏🏾👏🏾

@goneviral6037 Год назад

Best video ever!

@rohitbhatnagar7599 Год назад

WOW - what a video... Thank you !!!

@tomcam77 2 года назад

You guys are awesome 😎. Everyone that watched should buy y’all a six pack. I will.

@bootitwill 2 года назад

HI, great video! thx for posting. what brand torque wrenches do you guys use?

@joshaudet 3 года назад

What’s the flat rate time to replace the head gasket? And what do you charge to do it, parts and labor?

@hectorserrato1422 2 года назад

Great video! Used it to change the head gasket on my Prius V 2013 with my dad but now we can't get it to start! And keep getting a U0100 code that wasn't there before, any advice as to maybe why??

@samku-uv5lo 15 дней назад

The best You are great guys Thanks

@ProductReviews4you 3 года назад

Why dont you become famous like other RU-vidr ? Your video really good.

@yaweichen9773 2 года назад

Do you have a video on 2nd Gen Prius? Had the same problem on my 2008 Prius. I used head gasket sealer, it doesn’t work, now I am gonna need to replace the head gasket. Just bought all the parts and will do it this weekend